Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2012-2019 Owner's Manual Practical information Fuel tank

Practical information154208_en_Chap07_informations-pratiques_ed01-2016Low fuel levelWhen the low fuel level is reached this warning lamp comes on in the instrument panel. There remains approximately 5 litres of fuel in the tank. When the warning lamp flashes, there is very little fuel left.The key cannot be removed from the lock until the cap is refitted.Removing the filler cap may cause an inrush of air. This vacuum is perfectly normal and results from the sealing of the system.Fuel tankFuel tank capacity: approximately 50 litres.RefuellingTo fill the tank safely:Fthe engine must be switched off,Fopen the fuel filler flap 1,Finsert the key in the cap 2, then turn it to the left,Fremove the cap and hook it onto the clip located on the inside of the flap 3,Ffill the tank, but do not continue after the 3rd cut-off of the pump; this could cause malfunctions.With Stop & Start, never refuel with the system in STOP mode; you must switch off the ignition with the key.You must refuel as soon as possible to avoid running out of fuel.If you run out of fuel (Diesel), refer to the "Running out of fuel - Diesel" section.A self-adhesive label on the inner face of the filler flap reminds you of the type of fuel to use depending on your engine.Additions of fuel must be of at least 5 litres to be registered by the fuel gauge.1.Open the filler flap.2.Remove the filler cap.3.Hook the filler cap.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131