Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2012-2019 Owner's Manual Lighting and visibility Wipers

4Lighting and visibility87WipersManual modeThe wipers are controlled directly by the driver.FrontWipeFast (heavy rain).Normal (moderate rain).Intermittent (proportional to the speed of the vehicle).Park.Single wipe (press down and release).Switching onBriefly push the control stalk downwards.A wiping cycle confirms that the instruction has been accepted.This warning lamp comes on in the instrument panel and a message is displayed.This warning lamp goes off in the instrument panel and a message is displayed.Switching offBriefly push the control stalk downwards again, or place the control stalk in another position (Int, 1 or 2).AUTO modeThe windscreen wipers operate automatically, without any action on the part of the driver, when rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall.
Lighting and visibility88RearIf a significant accumulation of snow or ice is present, or when using a bicycle carrier on the boot, deactivate the automatic rear wiper via the vehicle configuration menu.Park.Intermittent wipe.Wash-wipe (set duration).Reverse gearWhen reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating.OnPress "MENU" to display the "MAIN MENU".Select "Driving".Select "Secondary page".Select "Vehicle settings".Select the "Driving assistance" tab.Activate the "Auto rear wiper in reverse" function.ConfigurationThis function is activated by default.OffDeactivate the "Auto rear wiper in reverse"function.The automatic rain sensitive windscreen wipers must be reactivated by pushing the control stalk downwards, if the ignition has been off for more than 1minute.Do not cover the rain sensor, linked with the sunshine sensor, located at the top of the windscreen behind the rear view mirror.Switch off the automatic rain sensitive wipers when using an automatic car wash.In winter, it is advisable to wait until the windscreen is completely clear of ice before activating the automatic rain sensitive wipers.Single wipePull the stalk briefly towards you.Unusual operationIf the wipers operate in intermittent mode when in AUTO mode, have the system checked by a PEUGEOT dealer or a qualified workshop.
4Lighting and visibility89Windscreen washPull the wiper stalk towards you. The windscreen wash, then the windscreen wipers, operate for a pre-determined time.AdviceScreenwash reservoirTop-up the level when necessary.FOpen the bonnet and secure it with the stay.FIdentify the reservoir filler cap.FOpen the blue filler cap.FPour in screenwash fluid for optimum cleaning.Fluid specificationFor optimum cleaning and to avoid freezing, this fluid must not be topped-up or replaced with plain water.In wintry conditions, it is recommended that you use an ethyl alcohol or methanol based fluid.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131