Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2012-2019 Owner's Manual Lighting and visibility Lighting control

4Lighting and visibility77LightingMain lightingThe vehicle has various exterior lamps:-sidelamps, to be seen,-dipped beam headlamps to see without dazzling other drivers,-main beam headlamps to see clearly when the road is clear.Additional lightingOther lamps are fitted to meet particular driving conditions:-a rear foglamp to better signal the presence of the vehicle in foggy conditions,-front foglamps with cornering lighting,-daytime running lamps to be seen during the day,-guide-me-home and welcome lighting for leaving and entering the vehicle.Automatic lighting functionsVarious automatic lighting functions are also available depending on options:-guide-me-home lighting,-cornering lighting,-welcome lighting,-daytime running lamps,-automatic illumination of headlamps.In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.
Lighting and visibility78Manual modeLighting off (ignition off) / Daytime running lamps (engine running).Sidelamps only.Dipped or main beam headlamps.Dipping the headlampsPull the stalk to switch the lighting between dipped / main beam headlamps.In the lighting off and sidelamps modes, the driver can switch on the main beam headlamps temporarily ("headlamp flash") by maintaining a pull on the stalk.DisplayIllumination of the corresponding indicator lamp in the instrument panel confirms the lighting switched on.Place the desired symbol against the marking.
4Lighting and visibility79The sidelamps and dipped beam headlamps are switched on automatically, without any action on the part of the driver, when a low level of ambient light is detected or in certain cases of activation of the windscreen wipers.As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically.AUTO modeOnFTurn the ring to the "AUTO" position. Activation of the function is accompanied by a message in the screen.OffFTurn the ring to another position. Deactivation of the function is accompanied by a message in the screen.Automatic guide-me-home lightingAssociation with the automatic lighting provides the guide-me-home lighting with the following additional options:-selection of the lighting duration of 15, 30 or 60 seconds,-automatic activation of guide-me-home lighting when the automatic illumination of headlamps is in operation.In the event of a fault with the sunshine sensor, the lighting comes In fog or snow, the sunshine sensor may detect sufficient light. In this case, the lighting will not come on automatically.Do not cover the sunshine sensor, coupled with the rain sensor and located in the centre of the windscreen behind the rear view mirror; the associated functions would no longer be controlled.ConfigurationPress "MENU" to display the "MAIN MENU".Select "Driving".Select "Secondary page".Select the "Driving assistance" tab.Activate the "Guide me home"function.Select "Vehicle settings".Switching offSwitching onDeactivate the "Guide me home"function.on, this warning lamp is displayed in the instrument panel and/or a message appears in the screen, accompanied by an audible signal.Contact a PEUGEOT dealer or a qualified workshop.
Lighting and visibility80Temporarily keeping the dipped beam headlamps on after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor.Manual guide-me-home lightingOnFWith the ignition off, "flash" the headlamps using the lighting stalk.FA further "headlamp flash" switches the function off.OffThe manual guide-me-home lighting switches off automatically after a set time.Parking lampsSide markers for the vehicle by illumination of the sidelamps on the traffic side only.FWithin one minute of switching off the ignition, operate the lighting control stalk up or down depending on the traffic side (for example: when parking on the left; lighting control stalk upwards; the right hand sidelamps are on).Manual guide-me-home lighting is also available from the remote control lighting button (refer to the corresponding section).This is confirmed by an audible signal and illumination of the corresponding direction indicator warning lamp in the instrument panel.To switch off the parking lamps, return the lighting control stalk to the middle position or switch on the ignition.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131