Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2012-2019 Owner's Manual In the event of a breakdown Changing a bulb

8In the event of a breakdown195208_en_Chap08_cas-de-panne_ed01-2016Changing a bulbFront lampsA. Model with light guideIn some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.The headlamps have polycarbonate lenses with a protective coating:Fdo not clean them using a dry or abrasive cloth, nor with a detergent or solvent product,Fuse a sponge and soapy water or a pH neutral product,Fwhen using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals.B. Model without light guide1.Main beam headlamps (H7-55W).2.Dipped beam headlamps (H7-55W).3.Daytime running lamps / sidelamps (light emitting diodes - LEDs).4.Direction indicators (PWY-24W).5.Front foglamps (directional according to version) (H11-55W).1.Main beam headlamps (H7-55W).2.Dipped beam headlamps (H7-55W).3.Daytime running lamps / sidelamps (W5-5W).4.Direction indicators (PWY-24W).5.Front foglamps (directional according to version) (H11-55W).Changing a bulb should only be done after the headlamp has been switched off for several minutes (risk of serious burns).FDo not touch the bulb directly with your fingers, use a lint-free cloth.It is imperative to use only anti-ultraviolet (UV) type bulbs to avoid damaging the headlamp.Always replace a failed bulb with a new bulb with the same type and specification.
In the event of a breakdown196208_en_Chap08_cas-de-panne_ed01-2016Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifications and colour.When refitting, close the protective cover carefully to preserve the sealing of the headlamp.Rapid flashing of the direction indicator warning lamp (right or left) indicates the failure of a bulb on that side.Changing direction indicator bulbsFTurn the bulb holder a quarter of a turn and extract it.FPull out the bulb and change it.To reassemble, carry out these operations in reverse order.C. GTi model1.Main beam headlamps (H7-55W).2.Dipped beam headlamps (H7-55W).3.Daytime running lamps / sidelamps (light-emitting diodes - LEDs).4.Direction indicators (light-emitting diodes - LEDs).5.Front foglamps (directional according to version) (H11-55W).
8In the event of a breakdown197208_en_Chap08_cas-de-panne_ed01-2016Changing main beam headlamp bulbsFDisconnect the main headlamp connector.FRemove the protective cover by pulling on the tab.FDisconnect the bulb connector.FPull out the bulb and replace it.Changing daytime running lamp / sidelamp bulbsFTurn the bulb holder a quarter turn and pull it out.FPull out the bulb and replace it.To reassemble, carry out these operations in reverse order.To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom.Changing dipped beam headlamp bulbsFRemove the protective cover by pulling on the tab.FDisconnect the bulb connector.FSpread the spring to release the bulb (model A).FExtract the bulb and change it.To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom (model A) or at the top (model B).
In the event of a breakdown198208_en_Chap08_cas-de-panne_ed01-2016Changing the daytime running lamps / sidelamps (light-emitting diodes - LEDs)For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop.Changing front foglamp / directional lampsFAccess to the front foglamp is through the orifice below the bumper.FDisconnect the bulb holder connector by pressing on the top of the tongue.FExtract the bulb holder by pressing on the two clips clips (top and bottom).FReplace the module.To reassemble, carry out these operations in reverse order.To obtain this module, contact a PEUGEOT dealer or a qualified workshop.You can also contact a PEUGEOT dealer or a qualified workshop for this replacement.
8In the event of a breakdown199208_en_Chap08_cas-de-panne_ed01-20161.Brake lamps (light-emitting diodes - LEDs).2.Reversing lamps (P21W).3.Direction indicators (PY21W amber).4.Sidelamps (light-emitting diodes - LEDs).Rear lamps5.Foglamp (P21W).Changing integrated direction indicator side repeater bulbsFInsert a flat screwdriver between the mirror glass and its base.FUse the screwdriver as a lever to extract the mirror glass.FUnclip the mirror shell by pressing on the two retaining clips.To reassemble, carry out these operations in reverse order.You should contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.FPress the central tongue and remove the side repeater.FPull the bulb holder out and replace the failed bulb.
In the event of a breakdown200208_en_Chap08_cas-de-panne_ed01-2016Changing reversing lamp and direction indicator bulbsThese two bulbs are changed from inside the boot:FOpen the boot.FRemove the access grille from the corresponding side trim panel.FSlacken and remove the nut.FDisconnect the lamp unit connector.FUnclip the lamp unit carefully extract it pulling in line towards the outside.FPress the four tabs and remove the bulb holder.FTurn the bulb a quarter of a turn and change it.To reassemble, carry out these operations in reverse order.Take care to engage the lamp unit in its guides, while keeping it in line with the vehicle.Tighten sufficiently to ensure sealing, but without damaging the lamp.Light-emitting diodes - LEDsFor replacement, contact a PEUGEOT dealer or qualified workshop.
8In the event of a breakdown201208_en_Chap08_cas-de-panne_ed01-2016Changing the third brake lamp bulbsFUnscrew the fixing pins on each side of the lamp, without removing them completely.FPush on the screws to unclip the lamp.FDisconnect the lamp connector.FRemove the lamp from the outside.FTurn the bulb holder which corresponds to the faulty bulb one quarter of a turn and remove it.FPull the bulb and change it.To refit, carry out these operations in reverse order.Number plate lampsTo facilitate the removal of the lamp, carry out this operation with the tailgate half open.FInsert a thin screwdriver into the lens cutout.FPush it outwards.FRemove the lens.FChange the faulty bulb.To refit, press on the lens to clip it in place.Access is by passing a hand under the bumper.FTurn the bulb holder a quarter of a turn and pull it out.FDisconnect the connector on the bulb holder.FPull the bulb out and change it.To refit, carry out these operations in reverse order.You can also contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.Changing a foglamp bulb
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131