Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2012-2019 Owner's Manual Driving Speed limiter

Driving134208_en_Chap06_conduite_ed01-2016Speed limiter"LIMIT"Steering mounted controls"This is the speed that the driver does not want to exceed".The speed setting is selected with the engine running, stationary or when driving. The minimum speed setting possible is 20 mph (30km/h).The vehicle responds to the accelerator until resistance is felt in the pedal, which signifies that the vehicle has reached the limiter speed setting.However, the limit speed can be exceeded by pressing the accelerator pedal beyond the point of resistance; simply release the accelerator pedal to return to a speed below the limiter setting.Setting and operation of the system can be done stationary with the engine running or when driving.FPlace the thumbwheel at the "LIMIT"position: the speed limiter mode is selected but is not switched on (PAUSE).You do not have to switch the speed limiter on in order to set the speed.Selection1.Speed limiter mode selection / off.2.Increase the registered speed setting.3.Decrease the registered speed setting.4.Speed limiter On / Pause.Registering a limit speedTo register a speed higher than the previous setting.-Press the SET + button.To register a speed lower than the previous setting.-Press the SET - button.A short press decreases the setting by 1mph(km/h).Pressing and holding decreases the setting in steps of 5 mph (km/h).A short press increases the setting in steps of 1 mph (km/h).Pressing and holding increases the setting in steps of 5mph (km/h).This can be done without switching the limiter on, but the engine must be running.
6Driving135208_en_Chap06_conduite_ed01-2016On / PauseFlashing of the speed settingExceeding the registered limit speedPressing the accelerator pedal to exceed the registered speed will not have any effect, unless you press the pedal firmly past the point of resistance.The speed limiter is deactivated temporarily and the registered speed setting flashes, accompanied by an audible signal.To return to normal operation of the speed limiter, reduce your speed to below the registered speed setting.It flashes:-after forcing the accelerator pedal past the point of resistance,-when the limiter cannot prevent the speed of the vehicle increasing, because of the profile of the road or when going down a steep hill,-under sharp acceleration.Operating faultThe registered speed is erased, then replaced by three dashes.Have the system checked by a PEUGEOT dealer or a qualified workshop.The last speed registered stays in memory.A first press on this button switches the speed limiter on, a second press pauses it (OFF).FPlace the thumbwheel at the 0 position or switch off the ignition to stop the system.Switching off the functionIn no circumstances can the speed limiter replace the need to observe speed limits or the need for vigilance on the part of the driver.Be aware of the effect of the profile of the road and sharp acceleration, maintaining control of the vehicle at all times.To avoid any risk of interference below the pedals:-ensure that the mat and its fixings on the floor are positioned correctly,-do not fit one mat on top of another.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131