Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2012-2019 Owner's Manual Driving Electronic gearbox

6Driving123208_en_Chap06_conduite_ed01-2016Electronic gearbox5-speed6-speedR.Reverse.N.Neutral.A.Automated mode.M.Manual mode.R.Reverse.N.Neutral.A.Automated mode.M.Manual mode.Automated modeThis mode allows gear changing without action by the driver.Moving offLever at position N.FPress the brake pedal firmly.FStart the engine.FPlace the lever at A or R.FRelease the brake pedal and press the accelerator pedal progressively.If the engine does not start:-If N is flashing in the instrument panel, move the lever to position A then to position N.-If the message "Foot on the brake" is displayed, press firmly on the brake pedal.The A, R or N position of the lever is indicated in the display.You can change from position A to Mand from M to A at any time.
Driving124208_en_Chap06_conduite_ed01-2016Stopping - Moving off on a slopeDo not uses the accelerator to hold the vehicle, but apply the parking brake.Stopping - ParkingPlace the lever at N and apply the parking brake.Manual modeThis mode allows manual sequential gear changing.FPush the lever forward to change up.FPull the lever back to change down.FMove the selector lever to M.Steering mounted control paddlesThis occasional manual gear changing can be used for overtaking, for example, while remaining in automated mode.FOperate the + or - steering mounted control paddle.The gearbox engages the gear requested if the engine speed permits. AUTO remains displayed in the instrument panel.After a few moments with no action on the controls, the gearbox returns to automatic management of the gears.Manual gear changingFPress the back of the "+" paddle to change up.FPress the back of the "-" paddle to change down.The gear engaged is indicated in the display.
6Driving125208_en_Chap06_conduite_ed01-2016Creep functionDepending on the engine, the vehicle moves without pressing the accelerator.AUTO and - appear in the instrument panel.FSelect position N.FPress the brake pedal firmly.FWait around 30 seconds until N or a gear appears in the instrument panel.FRelease the brake pedal.The gearbox is operational again.With the ignition on, the illumination of this warning lamp and the flashing of AUTO, accompanied by an audible signal and a message in the screen, indicate a gearbox fault.Have it checked by a PEUGEOT dealer or a qualified workshop.Assistance with low-speed manoeuvresWith the engine running at idle, parking brake released and the lever placed at A, M or R, the vehicle moves off when your release the brake pedal.It stops on opening the driver's door. Closing the door, and putting your foot on the brake or accelerator pedal allows movement of the vehicle again.Following disconnection of the battery, you have to reinitialise the gearbox.FSwitch the ignition on.Advice
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131