Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2012-2019 Owner's Manual Driving Cruise control

Driving136208_en_Chap06_conduite_ed01-2016Cruise control1.Cruise control mode selection / off.2.Increase the registered speed setting.3.Decrease the registered speed setting.4.Cruise control Off / Resume."This is the speed the driver wishes to maintain".This driving assistance system for use when the traffic is flowing, allows a speed set by the driver to be maintained, except on a steep gradient.With a manual gearboxTo be registered or activated, the speed of the vehicle must be above 25 mph (40 km/h) with 4th gear or higher engaged."CRUISE"SelectionFPlace the thumbwheel at the "CRUISE"position: the cruise control mode is selected but is not switched on (PAUSE).With an electronic gearboxTo be registered or activated, the speed of the vehicle must be above 25 mph (40 km/h) with 2nd gear or higher engaged in manual mode, or position A selected.With an automatic gearboxTo be registered or activated, the speed of the vehicle must be above 25 mph (40 km/h) with 2nd gear or higher engaged in manual mode, or position D selected.Steering mounted controls
6Driving137208_en_Chap06_conduite_ed01-2016Temporarily exceeding the speedRegistering a cruise speed setting-Bring the vehicle up to the desired speed by pressing the accelerator.Pause (OFF)-Press this button or the brake or clutch pedal.Resume-After the cruise control has been paused, press this button.The vehicle returns to the last registered speed.Or, you can also start the procedure for "Registering a cruise speed setting".Changing the registered speed settingTo register a speed higher than the previous setting, there are two possibilities.-Press the SET - or SET +buttonThe speed setting is registered/activated and the vehicle will maintain this speed.It is possible to accelerate and temporarily drive at a speed higher than the registered speed setting.The cruise speed setting value flashes.When the accelerator pedal is released, the vehicle will return to the registered speed setting.
Driving138208_en_Chap06_conduite_ed01-2016Be vigilant when modifying the cruise control setting by pressing and holding, as the speed of your vehicle may increase or decrease quickly.Do not use the cruise control on slippery roads or in heavy traffic.On a steep descent, the cruise control will not be able to prevent the vehicle from exceeding the registered speed.The cruise control system cannot in any circumstances replace the need to observe speed limits or the need for vigilance on the part of the driver.To avoid any risk of jamming of the pedals:-ensure that the mat is positioned and secured to the floor correctly,-never fit one mat on top of another.Operating faultThe registered speed setting is erased, then replaced by three dashes.Have it checked by a PEUGEOT dealer or a qualified workshop.Switching off the functionWithout using the acceleratorUsing the acceleratorTo register a speed lower than the previous setting:-Press the SET + button.A short press increases the speed setting by 1 mph (km/h).Pressing and holding increases the setting in steps of 5mph (km/h).-Accelerate beyond the registered speed to the new desired speed.-Press the SET + or SET - button.-Press the SET - button.A short press decreases the speed setting by 1 mph (km/h).Pressing and holding decreases the setting in steps of 5mph (km/h).-Place the thumbwheel at the "0" position: cruise control mode is deselected. The display returns to the total mileage recorder.After switching off the ignition, all registered speed settings are lost.
6Driving139208_en_Chap06_conduite_ed01-2016Speed settingsFGo to the main menu by pressing the "MENU" button.FSelect the "Driving" menu.FSelect the secondary page.FSelect "Speed settings".FSelect the speed to be modified.FPress on "Modify".As a safety measure, the driver must only carry out these operations when stationary.FEnter the new value.FPress on confirm.FConfirm to save the modifications and quit the menu.Use this button to select all speeds.Use this button to deselect all speeds.This button restores the factory settings.The speed values applied by the speed limiter "LIMIT" and the cruise control "CRUISE" can be saved (up to 5 different speed settings).With the touch screenAdvice
Driving140208_en_Chap06_conduite_ed01-2016To select a saved speed:Fpress and hold button "+" or "-"; the system stops at the closest saved speed,Fpress and hold button "+" or "-" again to select another saved speed.A reminder of the speed and the state of the system (on / off) is displayed in the instrument panel.At the steering mounted control
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131