Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2012-2019 Owner's Manual Audio and Telematics 7-inch touch screen

10Audio and Telematics225208_en_Chap10b_SMEGplus_ed01-20167-inch touch screenGPS satellite navigation - Multimedia audio - Bluetooth® telephoneContentsFirst steps226Steering mounted controls228Menus229Navigation230Navigation - Guidance238Traffic242Radio Media244Radio250DAB (Digital Audio Broadcasting) radio252Media254Settings258Connected services266Internet browser267MirrorLinkTM270CarPlay®274Telephone278Frequently asked questions286The system is protected in such a way that it will only operate in your vehicle.As a safety measure, the driver should only carry out operations which require prolonged attention while the vehicle is stationary.The display of an energy economy mode message signals that electrical systems operating are going into standby.Refer to the energy economy mode section.
Audio and Telematics226208_en_Chap10b_SMEGplus_ed01-2016First stepsUse the buttons to the left of the touch screen for access to the menu carousels, then press the virtual buttons in the touch screen.Each menu is displayed in one or two pages (primary page and secondary page).Secondary pagePrimary pageIn very hot conditions, the system may go into stand-by (screen and sound completely off) for a minimum period of5 minutes.
10Audio and Telematics227208_en_Chap10b_SMEGplus_ed01-2016Volume adjustment (each source is independent, including traffic announcements (TA) and navigation instructions).Press on Menu to display the menu carrousel.Press on SRC to display the audio sources carrousel.With the engine running, press to mute the sound.With the ignition off, press to switch the system on.Selection of audio source (depending on version):-FM /DAB* /AM stations.-USB memory stick.-CD player (located in the glove box)*.-Smartphone via MirrorLinkTM or CarPlay®.-Telephone connected by Bluetooth* and with Bluetooth* audio streaming.-Media player connected to the auxiliary socket (jack, cable not supplied).-Jukebox*, after first copying audio files to the internal memory of the system.* Depending on equipment.Short-cuts: using the touch buttons in the upper band of the touch screen, it is possible to go directly to the selection of audio source, the list of stations (or titles, depending on the source).The screen is of the "resistive" type, it is necessary to press firmly, particularly for "flick" gestures (scrolling through a list, moving the map...). A simple wipe will not be enough. Pressing with more than one finger is not recognised.The screen can be used when wearing gloves. This technology allows use at all temperatures.In very hot conditions, the volume may be limited to protect the system. The return to normal takes place when the temperature in the passenger compartment drops.To clean the screen, use a soft non-abrasive cloth (spectacles cloth) without any additional product.Do not use pointed objects on the screen.Do not touch the screen with wet hands.
Audio and Telematics228208_en_Chap10b_SMEGplus_ed01-2016Steering mounted controlsPress: mute on/ off.Increase volume.Change audio source: radio, media.Radio, rotate: automatic search for the previous/ next station.Radio, press: preset stations.Media, rotate: previous/ next track.Press: confirm a selection.Decrease volume.Telephone: start or answer a call.Call in progress: telephone menu (end call, secret mode, hands-free mode).Telephone, press and hold: reject an incoming call, end a call in progress; other than call in progress, telephone menu.Radio: display the list of stations.Media: display the list of tracks.Radio, press and hold: update the list of stations received.
10Audio and Telematics229208_en_Chap10b_SMEGplus_ed01-2016MenusSettingsRadio MediaNavigationDrivingConnected servicesTelephoneAdjust the settings for sound (balance, ambience, ...) and the display (language, units, date, time, ...).Select an audio source, a radio station, display photographs.Enter navigation settings and choose a destination.Access to the trip computer.Activate, deactivate or enter settings for certain vehicle functions.Connect using the "Internet browser".Operate certain applications on your smartphone via MirrorLinkTM or CarPlay®.Connect a telephone by Bluetooth®.Access to the CarPlay® function after connection of your smartphone by USB cable.(Depending on equipment)(Depending on equipment)
Audio and Telematics230208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3NavigationNavigationRoute settings
10Audio and Telematics231208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsNavigationSettingsNavigationEnter destinationDisplay recent destinationsRoute settingsFastestChoose the navigation criteria.The map displays the route chosen according to these criteria.ShortestTime/distanceEcologicalTollsFerriesTrafficStrict-CloseShow route on mapDisplay the map and start navigation.ConfirmSave the options.Save current locationSave the current address.Stop navigationDelete the navigation information.Voice synthesisChoose the volume for voice and announcement of street names.DiversionDetour from your initial route by a determined distance.NavigationDisplay in text modeZoom in.Zoom out.Display in full screen mode.Use the arrows to move the map.Switch to 2D map.
Audio and Telematics232208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3To use the telephone functions, refer to the "Telephone" section.For managing contacts and their addresses, refer to the "Telephone" section.NavigationAddressEnter destinationContacts
10Audio and Telematics233208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsNavigationSecondary pageEnter destinationAddressCurrent loc.Address settingsPoint of interestTown centerSaveSave the current address.Add waypointAdd a waypoint to the route.Navigate toPress to calculate the route.ContactsAddressesSelect a contact then calculate the route.ViewNavigate toSearch for contactCallOn the mapDisplay the map and zoom to view the roads.ItineraryCreate, add or delete a waypoint or view the itinerary.StopDelete navigation information.Navigate toPress to calculate the route.
Audio and Telematics234208_en_Chap10b_SMEGplus_ed01-2016Search for a point of interestNavigationPoint of interest displayed on the mapLevel 1Level 2Level 3
10Audio and Telematics235208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsNavigationSecondary pageSearch for POIAll POIsList of categories available.After choosing the category, select the points of interest.MotorDining/hotelsPersonalSearchSave the settings.NavigationSecondary pageShow POIsSelect allChoose the display settings for POIs.DeleteImport POIsConfirmSave the options.
Audio and Telematics236208_en_Chap10b_SMEGplus_ed01-2016Moving between the two menus.Level 1Level 2Level 3Traffic messagesSettingsDiversionMap settingsNavigationMap settingsSettingsSettings
10Audio and Telematics237208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsNavigationSecondary pageTraffic messagesOn the routeSettings for the choice of messages and the filter radius.Around vehicleNear destinationDetourDetour over a distanceRecalculate routeFinishSave your selections.NavigationSecondary pageMap settingsOrientationFlat view north headingChoose the display and orientation of the map.Flat view vehicle headingPerspective viewMapsAspect"Day" map colour"Night" map colourAuomatic day/nightConfirmSave the settings.NavigationSecondary pageSettingsRoute settingsEnter settings and choose the volume for the voice and announcement of street names.VoiceAlarm!Traffic optionsConfirmSave your selections.
Audio and Telematics238208_en_Chap10b_SMEGplus_ed01-2016Navigation - GuidanceChoosing a new destinationSelect "Enter destination".Select "Save" to save the address entered as a contact entry.The system allows up to 200 entries.Select "Confirm".Press on "Show route on map" to start navigation.Select "Address".Select the "Country:" from the list offered, then in the same way the "City:" or its post code, the "Road:", the "N°:".Confirm each time.Select "Navigate to".Choose the restriction criteria: "Tolls", "Ferries", "Traffic", "Strict", "Close".Choose the navigation criteria: "Fastest" or "Shortest" or "Time/distance" or "Ecological".To delete navigation information, press on "Settings".Press on "Stop navigation".To resume navigation press on "Settings".Press on "Resume guidance".Press on Navigation to display the primary page.Press on the secondary page.Towards a new destinationOr
10Audio and Telematics239208_en_Chap10b_SMEGplus_ed01-2016Towards a recent destinationSelect "Enter destination".Select an address from the list offered.Press on Navigation to display the primary page.Press on the secondary page.Select "Navigate to".Towards a contactSelect "Enter destination".Select "Contacts".Press on Navigation to display the primary page.Press on the secondary page.Select a destination from the contacts in the list offered.Select "Navigate to".Select the criteria then "Confirm" to start navigation.To be able to use navigation "towards a contact in the directory", it is first necessary to enter the address for your contact.Select the criteria then "Confirm" or press "Show route on map" to start navigation.
Audio and Telematics240208_en_Chap10b_SMEGplus_ed01-2016Towards GPS coordinatesSelect "Enter destination".Select "Address".Enter the "Longitude:" then the "Latitude:".Select "Navigate to".Select the criteria then "Confirm" or press "Show route on map" to start navigation.Press on Navigation to display the primary page.Press on the secondary page.Towards a point on the mapSelect "Enter destination".Select "On the map".Press on Navigation to display the primary page.Press on the secondary page.Zooming in on the map shows points with information.A long press on a point opens its content.Towards points of interest (POI)Points of Interest (POI) are listed in different categories.Press on Navigation to display the primary page.Press on the secondary page.Select "Search for POI".Select "All POIs",Or"Motor",Or"Dining/hotels".
10Audio and Telematics241208_en_Chap10b_SMEGplus_ed01-2016An annual mapping update allows new points of interest to be presented to you.You can also update the Risk areas / Danger areas every month.The detailed procedure is available on:http://peugeot.navigation.com.
Audio and Telematics242208_en_Chap10b_SMEGplus_ed01-2016Risk areas / Danger zone alert settingsPress on Navigation to display the primary page.Press on the secondary page.Select "Settings".Select "Alarm!" (Alert).It is then possible to activate Risk areas alerts then:-"Audible warning"-"Alert only when navigating"-"Alert only for overspeed"-"Display speed limits"-Timing: the choice of timing allows the time before giving a Risk areas alert to be defined.Select "Confirm".This series of alerts and displays is only available if Risk areas have first been downloaded and installed on the system.TrafficTraffic informationDisplay of messagesPress on Navigation to display the primary page.Press on the secondary page.Select "Traffic messages".Choose filter settings for:"On the route","Around","Near destination", filters to fine-tune the list of messages.Press again to remove the filter.
10Audio and Telematics243208_en_Chap10b_SMEGplus_ed01-2016Select the message from the list offered.Select the magnifying glass to have voice information.Setting filtersPress on Navigation to display the primary page.Press on the secondary page.Select "Settings".Select "Traffic options".Select:-"Be advised of new messages",-"Speak messages".Then enter the filter radius.Select "Confirm".We recommend a filter radius of:-12 miles (20 km) in urban areas,-30 miles (50 km) on motorways.TMC (Traffic Message Channel) messages on GPS-Navigation contain traffic information transmitted in real time.The TA (Traffic Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffic report is transmitted, the current audio source is interrupted automatically to play the TA message. Normal playback of the audio source resumes at the end of the transmission of the message.Receiving TA messagesPress on Navigation to display the primary page.Press on the secondary page.Select "Settings".Select "Voice".Activate / Deactivate "Traffic (TA)".
Audio and Telematics244208_en_Chap10b_SMEGplus_ed01-2016Radio MediaLevel 1Level 2List of FM stationsSave
10Audio and Telematics245208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2CommentsRadio MediaListList of FM stationsPress on a radio station to select it.Radio MediaSourceFM RadioSelect change of source.DAB RadioAM RadioUSBCDMirrorLinkTMCarPlay®iPodBluetoothAUXJukeboxRadio MediaSavePress an empty location to Save it.
Audio and Telematics246208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3MediaPhotosManage JukeboxList of FM stationsCopy to Jukebox
10Audio and Telematics247208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsRadio MediaSecondary pageRadio listSavePress a radio station to select it.Update listUpdate the list of stations received.FrequencyEnter the desired radio frequency.ConfirmSave the settings.Radio MediaSecondary pagePhotosHome screenDisplay the selected photo in the home page.RotateRotate the photo 90°.Select allSelect all the photos in the list.Press again to deselect.SlideshowPrevious photo.Display the photos in sequence, full screen.The system supports the following image formats: .gif, .jpg, .bmp, .png.Pause / Play.Next photo.Full screenDisplay the selected photo full-screen.Radio MediaSecondary pageManage JukeboxSort by folderChoose a selection mode.Sort by albumSelect allCopyCopy files to the Jukebox.Magnifying glassCreate folderChoose the desired function.RenameDeleteSelect allConfirmSave the settings.
Audio and Telematics248208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3MediaSettingsSettingsSettings
10Audio and Telematics249208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsRadio MediaSecondary pageMedia listPresentation of the last media used.Radio MediaSecondary pageSettingsMediaSettingsShuffle (all tracks)Choose the play settings.Shuffle (current album)RepeatAux. amplificationRadioSettingsRDS optionsActivate or deactivate the settings.DAB/FM station trackingDisplay Radio TextDigital radio slideshow displayAnnouncementsSettingsTraffic announcements (TA)Activate or deactivate the settings.News - WeatherSport - Programm infoFlash - Unforeseen eventsConfirmSave the settings.
Audio and Telematics250208_en_Chap10b_SMEGplus_ed01-2016Press on Radio Media to display the primary page.Press on Radio Media to display the primary page.Select "Save".If necessary, select change of source.Press on Radio Media to display the primary page.Select change source."AM Radio".By automatic frequency searchSelect "FM Radio"."AM Radio".Press on Radio Media to display the primary page.Select a preset radio station in the list.Select "FM Radio".Select a radio station from the list offered.Select "Update list" to refresh the list.Press on the secondary page.OrRadioChanging a radio frequencySelecting a stationTo select a preset radio station.THENRadio reception may be affected by the use of electrical equipment not approved by PEUGEOT, such as a USB charger connected to the 12 V socket.The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode. This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.Select "List" in the primary page.Select "Radio list" in the secondary page.OrPress 3 or 4 to move the cursor for an automatic search down or up for a radio frequency.Or
10Audio and Telematics251208_en_Chap10b_SMEGplus_ed01-2016Select a radio station or frequency (refer to the corresponding section).Press on Radio Media to display the primary page.Press on the secondary page.Select "Settings".Select "Radio".Activate/deactivate "RDS options".Press on Radio Media to display the primary page.Press on the secondary page.Press on "Save" (preset).Select a number in the list to preset the previously chosen radio station.A long press on a number saves (presets) the station.Press on Frequency.Enter the frequency in full (e.g.: 92.10 MHz) using the keypad then "Confirm".Changing radio stationPressing the name of the current radio station brings up a list.To change radio station press the name of the desired station.OrPress on Radio Media to display the primary page.Select "Save" (preset).Presetting a stationActivating / Deactivating RDSORTHENA press on this button presets all of the stations one after the other.Recalling preset stationsRDS, if activated, allows you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the entire country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
Audio and Telematics252208_en_Chap10b_SMEGplus_ed01-2016Display of options:if active but not available, the display will be greyed out,if active and available, the display will be blank.Display of "Radiotext" for the current station.Manage the Jukebox.Display current action.Select the audio source.Display the "DAB" band.Display of the name of the current station.Short-cut: access to the choice of audio source and the list of stations (or titles, depending on the source).Select the radio station.Any thumbnail broadcast by the station.Preset stations, buttons 1 to 15.Short press: select the preset radio station.Long press: preset a radio station.Next "Multiplex".Next radio station.Secondary page.Display the name and number of the multiplex service being used.Previous "Multiplex".Previous radio station.DAB (Digital Audio Broadcasting) radioIf the "DAB" radio station being listened to is not available on "FM", the "DAB FM" option is greyed out.Journaline®is a text-based information service designed for digital radio systems.It provides text-based information structured around topics and sub-topics.This service is available from the "LIST OF DAB STATIONS" page.
10Audio and Telematics253208_en_Chap10b_SMEGplus_ed01-2016Select change of source.Press on Radio Media to display the primary page.Select "DAB Radio".Select "List" in the primary page.Select the radio station from the list offered.Press on Radio Media to display the primary page.Press on the secondary page.Select "Settings".Select "Radio".Select "Digital/FM auto tracking" then "Confirm".DAB / FM auto trackingDigital radio"DAB" does not cover 100% of the territory.When the digital radio signal is poor, "DAB/FM station tracking" allows you to continue listening to the same station, by automatically switching to the corresponding "FM" analogue station (if there is one).If "DAB/FM station tracking" is activated, there is a difference of a fewseconds when the system switches to "FM" analogue radio with sometimes a variation in volume.When the digital signal is restored, the system automatically changes back to "DAB".Digital radio provides higher quality reception and also the graphical display of current information on the radio station being listened to. Select "List" in the primary page.The range of multiplexes available is displayed in alphabetical order.If the "DAB" station being listened to is not available on "FM" ("DAB/FM" option greyed out), or "DAB/FM station tracking" is not activated, the sound will cut out while the digital signal is too weak.orSelect "Radio list" in the secondary page.
Audio and Telematics254208_en_Chap10b_SMEGplus_ed01-2016MediaUSB playerSelecting the sourceThe steering mounted SRC (source) button can be used to go to the next media source, available if the source is active.Select change of source.Press on Radio Media to display the primary page.The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the first connection.Reduce the number of non-music files and the number of folders to reduce the waiting time.The playlists are updated every time the ignition is switched off or connection of a USB memory stick. The lists are memorised: if they are not modified, the subsequent loading time will be shorter.Insert the USB memory stick into the USB port or connect the USB device to the USB port using a suitable cable (not supplied).Auxiliary (AUX) socketConnect the portable device (MP3 player…) to the auxiliary Jack socket using an audio cable (not supplied).First adjust the volume of your portable device (to a high level). Then adjust the volume of your audio system.Display and management of the controls are via the portable device.Choose the source.CD playerInsert the CD in the player.Press on OK to confirm the selection.
10Audio and Telematics255208_en_Chap10b_SMEGplus_ed01-2016The audio equipment will only play audio files with".wma, .aac, .flac, .ogg and. mp3" file extensions and with a bit rate of between 32Kbps and 320 Kbps.It also supports VBR (Variable Bit Rate) mode.No other type of file (.mp4, ...) can be played.".wma" files must be of the standard wma 9 type.The sampling rates supported are 32, 44 and 48 KHz.It is advisable to restrict file names to 20characters, without using of special characters (e.g.: " " ? ; ù) to avoid any playing and displaying problems.Information and adviceUse only USB memory sticks formatted FAT 32 (file allocation table).The system supports USB mass storage devices, BlackBerry® devices or Apple® players via USB ports. The adaptor cable is not supplied.Control of the peripheral device is with the audio system controls.Other peripherals, not recognised on connection, must be connected to the auxiliary socket using a Jack cable (not supplied).It is recommended that the USB cable for the portable device is used.The system does not support the simultaneous connection of two identical devices (two memory sticks, two Apple®players) but it is possible to connect one memory stick and one Apple® player at the same time.In order to be able to play a recorded CDR or CDRW, when recording it is preferable to select the ISO 9660 level 1, 2 or Joliet standard.If the disc is recorded in another format it may not be played correctly.It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible (4x maximum) for optimum sound quality.In the particular case of a multi-session CD, the Joliet standard is recommended.
Audio and Telematics256208_en_Chap10b_SMEGplus_ed01-2016Bluetooth® audio streamingStreaming allows audio files on your telephone to be played through the vehicle's speakers.Connect the telephone: see the "Telephone" section, then "Bluetooth".Choose the "Audio" or "All" profile.If play does not start automatically, it may be necessary to start the audio playback from the telephone.Control is from the peripheral device or by using the audio system buttons.Once connected in streaming mode, the telephone is considered to be a media source.It is recommended that you activate "Repeat" on the Bluetooth peripheral.Connecting Apple® playersConnect the Apple® player to the USB port using a suitable cable (not supplied).Play starts automatically.Control is via the audio system.The classifications available are those of the portable device connected (artists/ albums/ genres/ playlists/ audiobooks/ podcasts).The default classification used is by artist. To modify the classification used, return to the first level of the menu then select the desired classification (playlists for example) and confirm to go down through the menu to the desired track.The version of software in the audio system may not be compatible with the generation of your Apple® player.
10Audio and Telematics257208_en_Chap10b_SMEGplus_ed01-2016Managing the JukeboxConnect the device (MP3 player...) to the USB port or auxiliary Jack socket using a suitable audio cable.When no audio file is copied to the system, which has a capacity of 8 GB, all of the Jukebox function symbols are greyed and are not available.Select "Media list".Select the magnifying glass to enter the folder or album and select audio file by audio file.Select copy "Copy Jukebox".Select "Confirm" then "Copy".Select "Sort by folder".Select "New folder" to create a folder structure in the Jukebox."Sort by album".Select "Keep structure" to retain the structure from the device.While copying the system returns to the primary page; you can go back to the copy view at any time by selecting this button.OrOr
Audio and Telematics258208_en_Chap10b_SMEGplus_ed01-2016Level 1SettingsLevel 2Level 3Audio settingsAudio settingsAudio settings
10Audio and Telematics259208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsSettingsAudio settingsAmbienceChoose the sound ambience.BalanceSound distribution using the Arkamys® system.Sound effectsSet the volume or activate the link to vehicle speed.RingtonesSet the telephone ringtone and volume.VoiceSet the volume and voice for speaking street namesConfirmSave your settings.SettingsTurn off screenFunction that turns off the display.Pressing the screen reactivates it.
Audio and Telematics260208_en_Chap10b_SMEGplus_ed01-2016UnitsDisplay screenConfigurationAdjust date and timeFactory settingsLevel 1Level 2
10Audio and Telematics261208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2CommentsSettingsSecondary pageSystem SettingsUnitsSet the units used to display distance, fuel consumption and temperature.Delete dataSelect the desired data in the list then press Delete.Factory settingsReturn to factory settings.ConfirmSave the settings.SettingsSecondary pageTime/DateConfirmSet the date and time then confirm.SettingsSecondary pageScreen settingsActivate automatic text scrollingActivate or deactivate the setting then confirm.Activate animationsConfirm
Audio and Telematics262208_en_Chap10b_SMEGplus_ed01-2016Choice of languageCalculatorConfigurationCalendarLevel 1Level 2
10Audio and Telematics263208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2CommentsSettingsSecondary pageLanguagesConfirmSelect the language then confirm.SettingsSecondary pageCalculatorSelect the calculator.SettingsSecondary pageCalendarSelect the calendar.
Audio and Telematics264208_en_Chap10b_SMEGplus_ed01-2016Audio settingsPress on Settings to display the primary page.Select "Audio settings".Select "Ambience"Or"Balance"Or"Sound effects"Or"Ringtones"Or"Voice".On-board audio: Arkamys© Sound Staging optimises sound distribution in the the passenger compartment.The distribution (or spatialisation using the Arkamys® system) of sound is an audio process that allows the audio quality to be adapted to the number of passengers in the vehicle.Available only with the 6-speaker configuration.The audio settings (Ambience, Bass:, Treble: and Loudness) are different and independent for each sound source.The settings for Distribution and Balance are common to all sources.-"Ambience" (choice of 6 musical ambiences)-"Bass:"-"Treble:"-"Loudness" (Activate/Deactivate)-"Distribution" ("Driver", "All passengers", "Front only")-"Audible response from touch screen"-"Volume linked to speed" (Activate/Deactivate)
10Audio and Telematics265208_en_Chap10b_SMEGplus_ed01-2016Press on Settings to display the primary page.Press on Settings to display the primary page.Press on Settings to display the primary page.Press on the secondary page.Press on the secondary pagePress on the secondary page.Select "System Settings".Select "Time/Date" to change the time zone, synchronisation with GPS, the time and its format, then the date.Select "Screen settings".Select "Units" to change the units of distance, fuel consumption and temperature.Select "Languages" to change language.Activate or deactivate "Activate automatic text scrolling" and "Activate animations".Select "Delete data" to delete the list of recent destinations, personal points of interest, contacts in the list.Select "Calculator" to display a calculator.Choose the item then select "Delete".Select "Calendar" to display a calendar.Select "Factory settings" to return to the original settings.Modifying system settings
Audio and Telematics266208_en_Chap10b_SMEGplus_ed01-2016Connected servicesLevel 1Level 2Level 3
10Audio and Telematics267208_en_Chap10b_SMEGplus_ed01-2016Internet browserAuthentication for Internet browsing via a smartphone is done using the Dial-Up Networking (DUN) standard.Press on "Internet browser" to display the browser home page; first connect your smartphone by Bluetooth, "Internet" option, see the "Telephone" section.Some smartphones of the latest generation do not support this standard.Press on Connected services to display the primary page.
Audio and Telematics268208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Usage monitorInternet connection settingsWi-Fi connectionBluetooth(devices)
10Audio and Telematics269208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2CommentsConnected servicesSecondary pageBluetooth connectionsSearchStart the search for a device to connect.Connect/DisconnectStart or end the Bluetooth connection to the selected device.UpdateImport contacts from the selected telephone to save them in the audio system.DeleteDelete the selected telephone.ConfirmSave the settings.Connected servicesSecondary pageTransfer rateResetReset the usage monitor, them confirm.ConfirmConnected servicesSecondary pageWi-Fi connectionAllDisplay all Wi-Fi networks.SecureDisplay secure Wi-Fi networks.RememberMemorise the selected Wi-Fi network(s).AddAdd a new Wi-Fi network.On/OffActivate or deactivate a Wi-Fi network.ConnectSelect a Wi-Fi network found by the system and connect to it.
Audio and Telematics270208_en_Chap10b_SMEGplus_ed01-2016MirrorLinkTMOptional depending on the smartphone and operating system.
10Audio and Telematics271208_en_Chap10b_SMEGplus_ed01-2016As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited.All operations must be done with the vehicle stationary.The synchronisation of a smartphone allows applications on a smartphone that are adapted to the MirrorLinkTMtechnology to be displayed in the vehicle's screen.The principles and standards are constantly evolving. For the communication process between the smartphone and the system to work correctly, the smartphone must be unlocked; update the operating system of your smartphone as well as the date and time in the smartphone and the system.For the list of eligible smartphones, connect to the brand's internet website in your country.As a safety measure, applications can only be viewed with the vehicle stationary; display is interrupted once the vehicle is moving.When connecting a smartphone to the system, it is recommended that Bluetooth® be started on the smartphone.Start the application on the smartphone (optional, depending on the smartphone and operating system).Access to the different audio sources remains accessible in the margin of the MirrorLinkTMdisplay, using touch buttons in the upper bar.Access to the menus for the system is possible at any time using the dedicated buttonsDuring the procedure, several screen pages relating to certain functions are displayed.Accept to start and end the connection.Connect a USB cable. The smartphone charges when connected by a USB cable.Press on "MirrorLinkTM" to start the application in the system.Once connection is established, an page is displayed with the applications already downloaded to your smartphone and adapted to MirrorLinkTM technology.If only one application has been downloaded to the smartphone, it starts automatically.MirrorLinkTM smartphone connectionPress the end of the lighting control stalk to start voice recognition of your smartphone via the system.Voice recognition requires a compatible smartphone connected to the vehicle by Bluetooth.Voice recognitionPlease note:-if your smartphone is supported, to make it "MirrorLinkTM" compatible, some phone manufacturers nevertheless invite you to first download a dedicated application.From the system, press on "Connected services" to display the primary page.
Audio and Telematics272208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3
10Audio and Telematics273208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsConnected servicesMirrorLinkTMAccess or return to the applications already downloaded to your smartphone and adapted to MirrorLinkTM technology.Access to a menu list depending on the application chosen."Back": abandon the current operation, go up one level."Home": access or return to the "Car mode" page.Access to the "Connected services" primary page.
Audio and Telematics274208_en_Chap10b_SMEGplus_ed01-2016CarPlay®
10Audio and Telematics275208_en_Chap10b_SMEGplus_ed01-2016Press on "CarPlay" to display the CarPlay® interface.Connect a USB cable. The smartphone charges when connected by a USB cable.Press the end of the lighting control stalk to start voice recognition of your smartphone via the system.CarPlay® smartphone connectionFrom the system, press on "Connected services" to display the primary page.Connect the USB cable. The smartphone is charged while connected by the USB cable.OrVoice recognitionAs a safety measure, applications can only be viewed with the vehicle stationary; display is interrupted once the vehicle is moving.The synchronisation of a smartphone allows applications on a smartphone that are adapted to the CarPlay®technology to be displayed in the vehicle's screen.As the principles and standards are constantly evolving, it is recommended that you update the operating system of your smartphone.For the list of eligible smartphones, connect to the brand's internet website in your country.As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited.All operations must be done with the vehicle stationary.During the procedure, one or more screen pages relating to certain functions are displayed on connection.On connecting the USB cable, the "Telephone" function changes to "CarPlay" in the menu carrousel.Press on "CarPlay" to display the CarPlay® interface.
Audio and Telematics276208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3
10Audio and Telematics277208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsConnected servicesApple® CarPlay®TelephoneFavouritesThe "Telephone" function is placed automatically in "Siri" voice mode.Press on "Display contacts" for access to the telephone menus.CallsContactsKeypadMessagesMusicListsPress on "Music" to browse and select the tracks on your smartphone.Press on "Playing" for access to the track currently playing.ArtistsTracksAlbumsOther...PlanDestinationsPress on "Destinations" to search for an address by "Siri" voice command or by using the keypad.The GPS function is through the telephone's 3G, 4G or Wi-Fi internet connection.MessagesDisplay messagesThe "Messages" function is place automatically in "Siri" voice mode to speak the message and the addressee.Press on "Display messages" for access to the messages.PlayingAccess to the track currently playing.
Audio and Telematics278208_en_Chap10b_SMEGplus_ed01-2016Level 1TelephoneLevel 2Level 3ContactsCall log
10Audio and Telematics279208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsTelephoneCall logAll callsAfter making choices, start the call.Incoming callsOutgoing callsContactsMagnifying glassViewCreateCallTelephoneContactsAddressesAfter making choices, start the call.ViewCreateModifyDeleteDelete allBy nameConfirmNavigate toSearch for contactCall
Audio and Telematics280208_en_Chap10b_SMEGplus_ed01-2016Bluetooth(devices)Telephone OptionsDevices detectedTelephoneconnectionLevel 1Level 2Level 3
10Audio and Telematics281208_en_Chap10b_SMEGplus_ed01-2016Level 1Level 2Level 3CommentsTelephoneconnectionSecondary pageBluetooth connectionSearchStart the search for another peripheral device to connect.Connect/DisconnectStart or stop the Bluetooth connection to the selected peripheral device.UpdateImport the contacts from the selected telephone to store them in the audio system.DeleteDelete the selected telephone.ConfirmSave the settings.TelephoneconnectionSecondary pageSearch for devicesDevices detectedTelephoneStart the search for peripheral devices.Audio streamingInternetTelephoneconnectionSecondary pageTelephone OptionsPut on holdCut the microphone temporarily so that the contact cannot hear your conversation with a passenger.UpdateImport the contacts from the selected telephone to save then in the audio system.RingtonesChoose the telephone ringtone and volume.Memory info.Contact records used and free, percentage of storage space used by internal contacts and Bluetooth contacts.ConfirmSave the settings.
Audio and Telematics282208_en_Chap10b_SMEGplus_ed01-2016Pairing a Bluetooth®telephoneFor reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio system must be carried out with the vehicle stationary.Procedure (short) from the telephoneIn the Bluetooth menu of your device, select the system name in the list of devices detected.Enter a code of at least 4 figures in the device and confirm.Enter this same code in the system, select "OK" and confirm.Procedure from the systemActivate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone configuration).Press on Telephone to display the primary page.Press on the secondary page.Select "Bluetooth connection".Select "Search for devices".The list of telephones detected is displayed.If the telephone is not detected, it is recommended that you switch the Bluetooth function on your telephone off and then on again.Select the name of the desired peripheral from the list and "Confirm".Enter a code of at least 4 figures for the connection then "Confirm".Enter this same code in the telephone then accept the connection.The system offers to connect the telephone:-in "Telephone" (hands-free kit, telephone only),-in "Audio streaming" (streaming: wireless playing of audio files from the telephone),-in "Internet" (internet browsing, only if your telephone is compatible with the "DUN" Dial-Up Networking Bluetooth standard).Select one or more profiles and confirm.
10Audio and Telematics283208_en_Chap10b_SMEGplus_ed01-2016The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you.The ability of the system to connect with only one profile depends on the telephone. The three profiles may all connect by default.Visit www.peugeot.co.uk for more information (compatibility, additional help, ...).The recognised telephone appears in the list.Depending on your telephone, you may be asked to accept automatic connection every time the ignition is switched on.On return to the vehicle, if the last telephone connected is present again, it is reconnected automatically and within around 30 seconds after switching on the ignition the pairing is done without any action on your part, with (Bluetooth activated).To modify the automatic connection mode, select the telephone in the list then select the desired profile.Depending on the type of telephone, the system will ask you to accept or not the transfer of your contacts.If not, select "Update".Connecting a Bluetooth®peripheral deviceAutomatic reconnectionOn switching on the ignition, the telephone connected when the ignition was last switched off is automatically reconnected, if this connection mode had been activated during the pairing procedure.The connection is confirmed by the display of a message and the name of the telephone.Manual connectionPress on Telephone to display the primary page.Press on the secondary page.Select "Bluetooth" to display the list of paired peripherals.Select the peripheral to connect.Press on "Search for devices".The connection is confirmed by the display of a message and the name of the telephone.
Audio and Telematics284208_en_Chap10b_SMEGplus_ed01-2016Managing paired telephonesThis function allows the connection or disconnection of a peripheral device as well as the deletion of a pairing.Using the telephone is not recommended while driving.Park the vehicle.Make the call using the steering mounted controls.Press on Telephone to display the primary page.Press on the secondary page.Select "Bluetooth" to display the list of paired peripheral devices.Select the peripheral in the list.Select "Search for devices"Or"Connect / Disconnect" to start or end the Bluetooth connection with the selected device.Or"Delete" to delete the pairing.Receiving a callAn incoming call is announced by a ring and a superimposed display in the screen.Make a short press on the steering mounted TEL button to accept an incoming call.Make a long presson the steering mounted TEL button to reject the call.OrSelect "End call".Making a callCalling a new numberPress on Telephone to display the primary page.Enter the phone number using the digital keypad.Press "Call" to start the call.Calling a contactPress on Telephone to display the primary page.Or make a long presson the steering mounted TEL button.
10Audio and Telematics285208_en_Chap10b_SMEGplus_ed01-2016Select "Contacts".Select the desired contact from the list offered.Select "Call".Calling a recently used numberPress on Telephone to display the primary page.Select "Call log".Select the desired contact from the list offered.It is always possible to make a call directly from the telephone; park the vehicle first as a safety measure.Managing contacts / entriesPress on Telephone to display the primary page.Select "Contacts".Select "View".Select "Create" to add a new contact.Or"Modify" to edit the selected contact.Or"Delete" to delete the selected contact.Or"Delete all" to delete all information for the selected contact.Select "By name" to view the list of contacts.
Audio and Telematics286208_en_Chap10b_SMEGplus_ed01-2016Frequently asked questionsThe following table groups together the answers to the most frequently asked questions concerning your audio system.QUESTIONANSWERSOLUTIONThe route calculation is not successful.The route settings may conflict with the current location (exclusion of toll roads on a toll motorway).Check the route settings in the "Navigation" menu.The POIs do not appear.The POIs have not been selected.Select the POIs in the list of POIs.The Risk areas audible warning does not work.The audible warning is not active.Activate audible warnings in the "Navigation" menu.The system does not suggest a detour around an incident on the route.The guidance criteria do not take account of TMC messages.Select the "Information" function in the list of route settings.I receive a Risk areas alert which is not on my route.Other than guidance, the system announces all Risk areas positioned in a cone located in front of the vehicle. It may provide an alert for Risk areas located on nearby or parallel roads.Zoom in on the map to view the exact position of the Risk areas. Select "On the route" to no longer receive alerts other than navigation instructions or to reduce the time for the announcement.Navigation
10Audio and Telematics287208_en_Chap10b_SMEGplus_ed01-2016QUESTIONANSWERSOLUTIONCertain traffic jams along the route are not indicated in real time.On starting, it is several minutes before the system begins to receive the traffic information.Wait until the traffic information is being received correctly (display of the traffic information icons on the map).The filters are too restrictive.Modify the settings.In certain countries, only major routes (motorways...) are listed for the traffic information.This phenomenon is normal. The system is dependent on the traffic information available.The altitude is not displayed.On starting, the initialisation of the GPS may take up to 3 minutes to receive more than 4 satellites correctly.Wait until the system has started up completely so that there is GPS coverage by at least 4satellites.Depending on the geographical environment (tunnel...) or the weather, the conditions of reception of the GPS signal may vary.This phenomenon is normal. The system is dependent on the GPS signal reception conditions.
Audio and Telematics288208_en_Chap10b_SMEGplus_ed01-2016RadioQUESTIONANSWERSOLUTIONThe quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5Mhz is displayed...).The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.Activate the "RDS" function by means of the short-cut menu to enable the system to check whether there is a more powerful transmitter in the geographical area.The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.This phenomenon is normal and does not indicate a fault with the audio system.The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park).Have the aerial checked by a PEUGEOT dealer.I cannot find some radio stations in the list of stations received.The station is not received or its name has changed in the list.Press and hold the "List" button at the steering mounted controls to update the list of stations received or press on the system update function: "Update list".Some radio stations send other information in place of their name (the title of the song for example).The system interprets this information as the name of the station.The name of the radio station changes.
10Audio and Telematics289208_en_Chap10b_SMEGplus_ed01-2016MediaQUESTIONANSWERSOLUTIONPlayback of my USB memory stick starts only after a very long wait (around 2 to 3 minutes).Some files supplied with the memory stick may greatly slow down access to reading the memory stick (multiplication by 10 of the catalogue time).Delete the files supplied with the memory stick and limit the number of sub-folders in the file structure on the memory stick.When I connect my iPhone as a telephone and to the USB port at the same time, I am unable to play the music files.When the iPhone connects automatically as a telephone, it forces the streaming function. The streaming function takes the place of the USB function which is then not useable, there is a period without sound of the track being played with Apple® players.Disconnect and reconnect to the USB port (the USB function takes priority over streaming).The CD is ejected automatically or is not played by the player.The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.Check that the CD is inserted in the player the right way up.Check the condition of the CD: the CD cannot be played if it is too badly damaged.Check the content in the case of a recorded CD: refer to the advice in the "AUDIO" section.The audio system's CD player does not play DVDs.Some recorded CDs will not be played by the audio system because they are not of adequate quality.The CD has been recorded in a format that is not compatible with the player (udf...).The CD is protected by an anti-pirating protection system which is not recognised by the audio system.There is a long waiting period following the insertion of a CD or connection of a USB memory stick.When a new medium is inserted, the system reads a certain amount of data (directory, title, artist, etc.). This may take from a few seconds to a few minutes.This phenomenon is normal.
Audio and Telematics290208_en_Chap10b_SMEGplus_ed01-2016QUESTIONANSWERSOLUTIONThe CD player sound is poor.The CD used is scratched or of poor quality.Insert good quality CDs and store them in suitable conditions.The audio equipment settings (bass, treble, ambiences) are unsuitable.Set the treble or bass level to 0, without selecting an ambience.Some characters in the media information are not displayed correctly while playing.The audio system does not display some types of characters.Use standard characters to name tracks and folders.Playing of streaming files does not start.The peripheral device connected does not support automatic play.Start the playback from the device.The names of tracks and the track length are not displayed on the screen when streaming audio.The Bluetooth profile does not allow the transfer of this information.
10Audio and Telematics291208_en_Chap10b_SMEGplus_ed01-2016QUESTIONANSWERSOLUTIONIn changing the setting of treble and bass the equalizer setting is deselected.The selection of an equalizer setting imposes the balance settings.Modifying one without the other is not possible.Modify the balance or equalizer settings to obtain the desired musical ambience.In changing the equalizer setting, treble and bass return to zero.When changing the balance settings, the distribution setting is deselected.The selection of a distribution setting imposes the balance settings.Modifying one without the other is not possible.Modify the balance or distribution settings to obtain the desired musical ambience.When changing an distribution setting, the balance setting is deselected.Settings
Audio and Telematics292208_en_Chap10b_SMEGplus_ed01-2016QUESTIONANSWERSOLUTIONThere is a difference in sound quality between the different audio sources.For optimum sound quality, the audio settings for Loudness, Ambience, Treble, Bass, Volume can be adapted to the different sound sources, which may result in audible differences when changing source.Check that the audio settings (Loudness, Ambience, Treble, Bass, Volume) are adapted to the sources listened to. Adjust Balance, Treble and Bass to the middle position, select the "None" musical ambience and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.With the engine off, the system switches off after a few minutes of use.When the engine is switched off, the system's operating time depends on the state of charge of the battery.The switch-off is normal: the system switches to economy mode and switches off to prevent discharging of the vehicle's battery.Start the vehicle's engine to increase the battery charge.
10Audio and Telematics293208_en_Chap10b_SMEGplus_ed01-2016QUESTIONANSWERSOLUTIONI cannot connect my Bluetooth telephone.The telephone's Bluetooth function may be switched off or the telephone may not be visible.Check that your telephone's Bluetooth function is switched on.Check in the telephone settings that it is "visible to all".The Bluetooth telephone is not compatible with the system.You can check the compatibility of your telephone at www.peugeot.co.uk (services).The volume of the telephone connected in Bluetooth mode is inaudible.The volume depends both on the system and on the telephone.Increase the volume of the audio system, to maximum if required, and increase the volume of the telephone if necessary.The ambient noise level has an influence on the quality of telephone communication.Reduce the ambient noise level (close the windows, reduce the booster fan speed, slow down...).Some contacts are duplicated in the list.The options for synchronizing contacts are synchronizing the contacts on the SIM card, the contacts on the telephone, or both. When both synchronizations are selected, some contacts may be duplicated.Select "Display SIM card contacts" or "Display telephone contacts".Contacts are not shown in alphabetical order.Some telephones offer display options. Depending on the settings chosen, contacts can be transferred in a specific order.Modify the display setting in the telephone directory.The system does not receive SMS text messages.The Bluetooth mode does not permit sending SMS text messages to the system.Telephone
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131