Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2012-2014 Visibility Lighting Control Stalk

480VISIBILITYLIGHTING CONTROL STALK System for selection and control of the various front and rear lamps providing the vehicle's lighting. Manual controls The lighting commands are made di-rectly by the driver by means of ring Aand stalk B . A. main lighting mode selection ring, with: Model without AUTO lighting Model with AUTO lighting lighting off, sidelamps only, dipped or main beam headlamps, B. stalk for inversion of the beam by pulling: dipped/main beam headlamps. automatic illumination of headlamps. Displays The corresponding indicator lamp comes on on the instrument panel to con rm the switching on of the lighting selected. Main lighting The vehicle's various front and rear lamps are designed to adapt the driv-er's visibility gradually in relation to the climatic conditions: - sidelamps, to be seen, - dipped beam headlamps to see without dazzling other drivers, - main beam headlamps for good visibility when the road is clear. Additional lighting Other lamps are installed to respond to particular driving conditions: - rear foglamps to be seen from a dis-tance, - front foglamps for even better visibility, - directional headlamps for improved visibility around corners. Programmes Various automatic lighting control modes are also available according to the following options: - "guide-me-home" lighting, - automatic illumination of headlamps, - static directional lighting. In the lighting off and sidelamps modes, the driver can switch on the main beam headlamps directly ("headlamp ash") by pulling and holding the stalk.
4!i81VISIBILITY Model with front and rear foglamps front and rear foglamps C. foglamps selection ring. These operate with the dipped and main beam headlamps. To switch on the foglamps, turn ring C forwards. To switch off the rear foglamps, turn ring C rearwards twice in succes-sion. When the lighting is switched off auto-matically (on AUTO model) or when the dipped beam headlamps are switched off manually, the foglamps and the side-lamps will remain on. Turn the ring rearwards to switch off the foglamps, the sidelamps will then switch off. Do not forget to switch off the front foglamps and the rear foglamps when they are no longer neces-sary. In normal light levels, the power of their beams may dazzle other drivers. Lighting on reminder The triggering of an audible signal when a door is opened warns the driver that they have forgotten to switch off the vehicle's lighting, with the ignition off. In this case, switching off the light-ing will stop the audible signal. When the ignition is switched off, if the dipped beam headlamps re-main on, they will be switched off automatically after thirty minutes to prevent discharging of the battery. This indicator lamp comes on on the instrument panel. * According to country. Daytime running lamps * On vehicles tted with daytime running lamps, the dipped beam headlamps come on when the vehicle is started. The instruments and controls (multi-function screen, air conditioning control panel, ...) are not lit, unless the auto-matic lighting mode is activated or the lighting is switched on manually.
4!82VISIBILITY In fog or snow, the sunshine sensor may detect suf cient light. There-fore, the lighting will not come on automatically. Do not cover the sunshine sensor, coupled with the rain sensor and located in the centre of the wind-screen behind the rear view mirror; the associated functions would no longer be controlled. Coupling with the "Guide-me-home" lighting Association with the automatic illumina-tion of headlamps provides the "guide-me-home" lighting with the following additional options: - selection of the lighting duration to 15, 30 or 60 seconds in the vehi-cle parameters in the multifunction screen con guration menu, - automatic activation of "guide-me-home" lighting when automatic illumi-nation of headlamps is in operation. Automatic illumination of headlamps The sidelamps and dipped beam head-lamps are switched on automatically, with-out any action on the part of the driver, when a low level of external light is detected (sen-sor behind the rear view mirror) or when the windscreen wipers are switched on. As soon as the brightness returns to a suf- cient level or after the windscreen wipers are switched off, the lighting is switched off automatically. "Guide-me-home" lighting The dipped beam headlamps remain on temporarily, after switching off the vehi-cle's ignition, to make the driver's exit easier in poor light. Activation With the ignition off, activate a "headlamp ash" using stalk B . A second "headlamp ash" switches the function off again. Switching off The "guide-me-home" lighting is switched off automatically following the door locking command, after a given time. Activation Turn ring A to the " AUTO " position. The automatic illumination of head-lamps is accompanied by a mes-sage in the multifunction screen. Deactivation Turn ring A to a position other than " AUTO ". Deactivation is accompa-nied by a message in the multifunction screen. Operating fault In the event of a malfunction of the brightness sensor, the light-ing comes on accompanied by the service warning lamp, an audible signal and a message on the multifunction screen. Have it checked by a PEUGEOT dealer or a quali ed workshop.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131