Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2012-2014 Visibility

480VISIBILITYLIGHTING CONTROL STALK System for selection and control of the various front and rear lamps providing the vehicle's lighting. Manual controls The lighting commands are made di-rectly by the driver by means of ring Aand stalk B . A. main lighting mode selection ring, with: Model without AUTO lighting Model with AUTO lighting lighting off, sidelamps only, dipped or main beam headlamps, B. stalk for inversion of the beam by pulling: dipped/main beam headlamps. automatic illumination of headlamps. Displays The corresponding indicator lamp comes on on the instrument panel to confi rm the switching on of the lighting selected. Main lighting The vehicle's various front and rear lamps are designed to adapt the driv-er's visibility gradually in relation to the climatic conditions: - sidelamps, to be seen, - dipped beam headlamps to see without dazzling other drivers, - main beam headlamps for good visibility when the road is clear. Additional lighting Other lamps are installed to respond to particular driving conditions: - rear foglamps to be seen from a dis-tance, - front foglamps for even better visibility, - directional headlamps for improved visibility around corners. Programmes Various automatic lighting control modes are also available according to the following options: - "guide-me-home" lighting, - automatic illumination of headlamps, - static directional lighting. In the lighting off and sidelamps modes, the driver can switch on the main beam headlamps directly ("headlamp fl ash") by pulling and holding the stalk.
4!i81VISIBILITY Model with front and rear foglamps front and rear foglamps C. foglamps selection ring. These operate with the dipped and main beam headlamps. � To switch on the foglamps, turn ring C forwards. � To switch off the rear foglamps, turn ring C rearwards twice in succes-sion. When the lighting is switched off auto-matically (on AUTO model) or when the dipped beam headlamps are switched off manually, the foglamps and the side-lamps will remain on. � Turn the ring rearwards to switch off the foglamps, the sidelamps will then switch off. Do not forget to switch off the front foglamps and the rear foglamps when they are no longer neces-sary. In normal light levels, the power of their beams may dazzle other drivers. Lighting on reminder The triggering of an audible signal when a door is opened warns the driver that they have forgotten to switch off the vehicle's lighting, with the ignition off. In this case, switching off the light-ing will stop the audible signal. When the ignition is switched off, if the dipped beam headlamps re-main on, they will be switched off automatically after thirty minutes to prevent discharging of the battery. This indicator lamp comes on on the instrument panel. * According to country. Daytime running lamps * On vehicles fi tted with daytime running lamps, the dipped beam headlamps come on when the vehicle is started. The instruments and controls (multi-function screen, air conditioning control panel, ...) are not lit, unless the auto-matic lighting mode is activated or the lighting is switched on manually.
4!82VISIBILITY In fog or snow, the sunshine sensor may detect suffi cient light. There-fore, the lighting will not come on automatically. Do not cover the sunshine sensor, coupled with the rain sensor and located in the centre of the wind-screen behind the rear view mirror; the associated functions would no longer be controlled. Coupling with the "Guide-me-home" lighting Association with the automatic illumina-tion of headlamps provides the "guide-me-home" lighting with the following additional options: - selection of the lighting duration to 15, 30 or 60 seconds in the vehi-cle parameters in the multifunction screen confi guration menu, - automatic activation of "guide-me-home" lighting when automatic illumi-nation of headlamps is in operation. Automatic illumination of headlamps The sidelamps and dipped beam head-lamps are switched on automatically, with-out any action on the part of the driver, when a low level of external light is detected (sen-sor behind the rear view mirror) or when the windscreen wipers are switched on. As soon as the brightness returns to a suf-fi cient level or after the windscreen wipers are switched off, the lighting is switched off automatically. "Guide-me-home" lighting The dipped beam headlamps remain on temporarily, after switching off the vehi-cle's ignition, to make the driver's exit easier in poor light. Activation � With the ignition off, activate a "headlamp fl ash" using stalk B . � A second "headlamp fl ash" switches the function off again. Switching off The "guide-me-home" lighting is switched off automatically following the door locking command, after a given time. Activation � Turn ring A to the " AUTO " position. The automatic illumination of head-lamps is accompanied by a mes-sage in the multifunction screen. Deactivation � Turn ring A to a position other than " AUTO ". Deactivation is accompa-nied by a message in the multifunction screen. Operating fault In the event of a malfunction of the brightness sensor, the light-ing comes on accompanied by the service warning lamp, an audible signal and a message on the multifunction screen. Have it checked by a PEUGEOT dealer or a qualifi ed workshop.
4iVISIBILITYSTATIC DIRECTIONALLIGHTING When the dipped or main beam head-lamps are on, this function enables the beam to light the inside of the turn with an additional angle of approximately 30°. The use of this lighting is optimum above all at low and average speed (city driving, winding roads, ...). with directional lightingwithout directional lighting Programming Switching on The system is switched on from a cer-tain speed and a certain angle of rota-tion of the steering wheel. Operating fault The function is activated or deactivated via the multi-function screen confi gura-tion menu. This function is activated by default. In the event of a malfunction, this warning lamp fl ashes on the instrument panel, accom-panied by a message on the multifunction screen. Have it checked by a PEUGEOT dealer or a qualifi ed workshop. HEADLAMP ADJUSTMENT The initial setting is position "0" . To avoid causing a nuisance to other road users, the height of the headlamps should be adjusted in relation to the load in the vehicle. 0. 1 or 2 people in the front seats. -. 3 people. 1. 4 people. 2. 4 people + maximum authorised load. 3. Driver + maximum authorised load. Switching off The system is switched off below a certain angle of rotation of the steering wheel. It is switched off when reverse gear is engaged.
4ii84VISIBILITYWIPER CONTROL STALK System for the selection and control of the various windscreen wiping modes permitting the dispersal of rain and cleaning. The vehicle's windscreen wipers are designed to gradually improve the driv-er's visibility in relation to the weather conditions. Manual controls The wiping commands are made directly by the driver using stalk A . fast (heavy rain), normal (moderate rain), intermittent (in proportion to the speed of the vehicle), off, single wipe (press downwards), Model with intermittent wiping Windscreen wipers A. wiping speed selection control: Windscreen and headlamp wash � Pull the windscreen wiper stalk to-wards you. The screenwash then the wipers operate for a fi xed period. The headlamp wash is only activate if the dipped headlamps are on . With daytime running lamps, to activate the headlamp wash, posi-tion the lighting stalk in the dipped beam position. On vehicles fi tted with digital air conditioning, any action on the windscreen wash control results in temporary closing of the air intake to avoid odours inside the passen-ger compartment. Automatic wiping is not available on the 207CC at present.
4i85VISIBILITY Special position of the windscreen wipers In the minute following switching off of the ignition, any action on the stalk po-sitions the wipers vertically on the wind-screen. This action enables you to position the wiper blades for winter parking. To park the wipers after this has been done, switch on the ignition and operate the stalk. COURTESY LAMP A.Courtesy lampB.Map reading lamps In this position, the courtesy lamp comes on gradually: Map reading lamps � With the ignition on, press the cor-responding switch. With the "permanent lighting" mode, the duration of lighting varies, de-pending on the circumstances: - with the ignition off, approxi-mately ten minutes, - in energy economy mode, ap-proximately thirty seconds, - with the engine running, unlimited. - when the vehicle is unlocked, - when the key is removed from the ignition, - when a door is opened, - when the remote control locking but-ton is activated, in order to locate your vehicle. It switches off gradually: - when the vehicle is locked, - when the ignition is switched on, - 30 seconds after the last door is closed. Permanently off. Permanent lighting. Courtesy lamp
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131