Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2012-2014 Safety Seat Belts

6!SAFETY98SEAT BELTSROLL-OVER BARS System which protects all of the oc-cupants restrained by their seat belt should the vehicle roll over. The roll-over bars are built into the back of the rear bench seat. Their presence is indicated by the words "Rollover Pro-tection". Activation They are triggered simultaneously should the vehicle roll over. Operating fault If this warning lamp comes on on the instrument panel, accom-panied by an audible signal and a message on the multifunction screen, contact a PEUGEOT dealer or a qualifi ed workshop to have the system checked. In order to guarantee the correct opera-tion and the deployment of the roll-over bars if roll-over is detected, the follow-ing conditions must be complied with: - no accessory which is not recom-mended by PEUGEOT should be in contact with or fi xed to the roll-over bars, - no object should block or stop the movement of the roll-over bars, - the area above the roll-over bars should be clear of any objects. Front seat belts The front seat belts are fi tted with a pre-tensioning and force limiting system. This system improves safety in the front seats in the event of front impacts. De-pending on the severity of the impact, the pretensioning system instantly tight-ens the seat belts against the body of the occupants. The pretensioning seat belts are active when the ignition is on. The force limiter reduces the pressure of the seat belt on the occupant's chest. This improves their protection.
6SAFETY99 Fastening Seat belt not fastened/unfastened warning lamp � Pull the strap, then insert the tongue in the buckle. � Check that the seat belt is fastened correctly by pulling the strap. When the ignition is switched on, this warning lamp comes on on the instrument panel if the driver * and/or the front passenger has not fastened their seat belt. Above approximately 12 mph (20 km/h) and for two minutes, this warning lamp fl ashes accompanied by an audible sig-nal of increasing volume. When the two minutes have elapsed, this warning lamp remains on until the driver * and/or the front passenger fastens their seat belt. Unfastening � Press the red button on the buckle. 1. Front left seat belt warning lamp. 2. Front right seat belt warning lamp. On the central panel, the corresponding warning lamp 1 or 2 comes on in red if the seat belt is not fastened or is unfas-tened Seat belt not fastened/unfastened warning lamps panel Rear seat belts The rear seats are fi tted with two three-point inertia reel seat belts. Fastening � Pull the strap, then insert the tongue in the buckle. � Check that the seat belt is fastened correctly by pulling the strap. Unfastening � Press the red button on the buckle. * According to country.
6iSAFETY100 The driver must ensure that passen-gers use the seat belts correctly and that they are all restrained securely before setting off. Wherever you are seated in the ve-hicle, always fasten your seat belt, even for short journeys. Do not interchange the seat belt buckles as they will not fulfi l their role fully. The seat belts are fi tted with an in-ertia reel permitting automatic ad-justment of the length of the strap to your size. The seat belt is stowed automatically when not in use. Before and after use, ensure that the seat belt is reeled in correctly. The lower part of the strap must be positioned as low as possible on the pelvis. The upper part must be positioned in the hollow of the shoulder. The inertia reels are fi tted with an automatic locking device which comes into operation in the event of a collision, emergency braking or if the vehicle rolls over. You can release the device by pulling fi rmly on the strap and releasing it so that it reels in slightly. In order to be effective, a seat belt must: - be tightened as close to the body as possible, - be pulled in front of you with a smooth movement, checking that it does not twist, - be used to restrain only one person, - not bear any trace of cuts or fraying, - not be converted or modifi ed to avoid affecting its performance. In accordance with current safety regula-tions, for all repairs on your vehicle, go to a qualifi ed workshop with the skills and equipment needed, which a PEUGEOT dealer is able to provide. Have your seat belts checked regularly by a PEUGEOT dealer or a qualifi ed workshop, particularly if the straps show signs of damage. Clean the seat belt straps with soapy water or a textile cleaning product, sold by PEUGEOT dealers. After folding or moving a seat or rear bench seat, ensure that the seat belt is positioned and reeled in correctly. Recommendations for children Use a suitable child seat if the passen-ger is less than 12 years old or shorter than one and a half metres. Never use the same seat belt to se-cure more than one person. Never allow a child to travel on your lap. In the event of an impact Depending on the nature and seri-ousness of the impact , the preten-sioning device may be deployed before and independently of the airbags. De-ployment of the pretensioners is ac-companied by a slight discharge of harmless smoke and a noise, due to the activation of the pyrotechnic car-tridge incorporated in the system. In all cases, the airbag warning lamp comes on. Following an impact, have the seat belts system checked, and if neces-sary replaced, by a PEUGEOT dealer or a qualifi ed workshop.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131