Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2012-2014 Practical Information Changing a Wheel

9iPRACTICAL INFORMATION128 * According to country. CHANGING A WHEEL * Procedure for changing a faulty wheel for the spare wheel using the tools pro-vided with the vehicle. Access to the tools The tools are installed in a box at the bottom of the boot under the spare wheel. For access to them, refer to the para-graph "Access to the spare wheel" on the following page. List of tools 1. Wheelbrace. For removal of the wheel trim and removal of the wheel fi xing bolts. 2. Jack with integral handle. For raising the vehicle. 3. "Bolt cover" tool. For removal of the bolt protectors (covers) on alloy wheels. 4.Socket for the security bolts (located in the glove box). For adaptation of the wheelbrace to the special "security" bolts. 5. Removable towing eye. Refer to the paragraph "Towing the vehicle". All of these tools are specifi c to your vehicle. Do not use them for other purposes. Other accessories Wheel with trim When removing the wheel , detach the trim fi rst using the wheelbrace 1 pulling at the valve passage hole. When refi tting the wheel , re-fi t the trim starting by placing its notch facing the valve and press around its edge with the palm of your hand.
9iiPRACTICAL INFORMATION129 Access to the spare wheel The "space-saver" spare wheel is in-stalled in the boot under the fl oor. To gain access to it: � place the vehicle in the "coupé" con-fi guration, � open the boot, � raise the fl oor. Fixing the "space-saver" spare wheel If your vehicle is fi tted with alloy wheels, it is normal to notice, when tightening the bolts on fi tting, that the washers do not come into con-tact with the "space-saver" spare wheel. The wheel is secured by the conical contact of each bolt. Taking out the wheel � Slacken and remove the retaining strap. � Raise the spare wheel towards you from the rear. � Take the wheel out of the boot. Putting the wheel back in place �Put the spare wheel back in its housing. � Put the retaining strap back in place and tighten it. � Put the boot fl oor back in place. Tyre under-infl ation detection The spare wheel is not fi tted with a sensor. The punctured wheel must be repaired by a PEUGEOT dealer.
9iPRACTICAL INFORMATION130 Parking the vehicle Immobilise the vehicle where it does not block traffi c: if possible, park the vehicle on level, stable and non-slippery ground. Apply the parking brake, switch off the ignition and engage fi rst gear * to lock the wheels. If necessary, place a chock under the wheel diagonally opposite the wheel to be changed. It is imperative that you ensure that the occupants get out of the vehicle and wait in a safe location. Never go underneath a vehicle raised using a jack; use an axle stand. List of operations � Remove the chromed bolt cover from each of the bolts using the tool 3 . � If your vehicle is equipped with this, fi t the security socket 4 on the wheelbrace 1 to slacken the security bolt. � Slacken the other bolts using the wheelbrace 1 only. � Place the jack 2 in contact with one of the two front A or rear B locations provided on the underframe, which-ever is closest to the wheel to be changed. � Extend the jack 2 until its base plate is in contact with the ground. Ensure that the centreline of the jack base plate is directly below the location Aor B used. � Raise the vehicle until there is suf-fi cient space between the wheel and the ground to admit the spare (not punctured) wheel easily. � Remove the bolts and store them in a clean place. � Remove the wheel. * position P for the automatic gear-box.
9iPRACTICAL INFORMATION131 After changing a wheel Using the "space-saver" spare wheel: � do not fi t the wheel trim, � do not exceed a speed of 50 mph (80 km/h). Have the tightening of the bolts and the pressure of the spare wheel checked by a PEUGEOT dealer without delay. Have the punctured wheel repaired and replace it on the vehicle as soon as possible. Fitting a wheel List of operations � Put the wheel in place on the hub. � Screw in the bolts by hand. � Pre-tighten the security bolt us-ing the wheelbrace 1fi tted with the security socket 4 (if your vehicle is equipped with this). � Pre-tighten the other bolts using the wheelbrace 1 only. � Lower the vehicle fully. � Fold the jack 2 and detach it. � Tighten the security bolt using the wheelbrace 1fi tted with the security socket 4 (if your vehicle is equipped with this). � Tighten the other bolts using the wheelbrace 1 only. � Refi t the chromed bolt covers on each of the bolts. � Store the tools in the box at the bottom of the boot. � Store the punctured wheel in a corner of the boot.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131