Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2012-2014 Practical Information Changing a Bulb

9iiPRACTICAL INFORMATION132CHANGING A BULB1.Direction indicators (PY21W amber).2.Sidelamps (W5W).3.Dipped beam headlamps (H7-55W).4.Main beam headlamps (H1-55W).5.Directional headlamps (H7-55W).6.Foglamps (H11-55W). Changing the direction indicator bulbs � Do not touch the bulb directly with your fi ngers, use lint-free cloths. Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns). It is imperative to use only anti-ultraviolet (UV) type bulbs in order not to damage the headlamp. Always replace a failed bulb with a new bulb with the same type and specifi cation. Model with conventional lamps Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifi cation and colour. � Turn the bulb holder one quarter of a turn and remove it. � Pull the bulb then change it. To refi t, carry out these operations in reverse order. The headlamps are fi tted with polycar-bonate glass with a protective coating: �do not clean them using a dry or abrasive cloth, nor with a deter-gent or solvent product,� use a sponge and soapy water, � when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals. Model with elliptical module dipped beam headlamps and directional headlamps Front lamps
9PRACTICAL INFORMATION133 Changing the integrated direction indicator side repeaters Changing the foglamp bulbs For replacement of these bulbs, contact a PEUGEOT dealer. � Insert a screwdriver towards the centre of the repeater between the repeater and the base of the mirror. � Tilt the screwdriver to extract the repeater and remove the repeater. � Disconnect the repeater connector. To refi t, carry out these operations in reverse order. To obtain a replacement repeater, contact a PEUGEOT dealer. Changing the sidelamp bulbs � Disconnect the main headlamp connector. � Remove the plastic protective cover by pulling on the tab. � Turn the bulb holder one quarter of a turn and remove it. � Pull the bulb and change it. To refi t, carry out these operations in reverse order. Changing the dipped, main beam or directional headlamp bulbs � Disconnect the main headlamp connector. � Remove the corresponding plastic protective cover by pulling on the tab. � Disconnect the connector of the corresponding lamp. � Move aside the spring to release the bulb and remove the bulb. To refi t, carry out these operations in reverse order.
9iPRACTICAL INFORMATION134Rear lamps1.Brake lamps (P 21 W).2.Sidelamps (LEDs).3.Foglamps (P 21 W).4.Direction indicators (PY 21 W amber).5.Reversing lamps (R 10 W). Changing bulbs These bulbs (with the exception of the diode lamps) are changed from outside the boot: �fi rst open the fl ap to gain access to the fi xing bolt, � remove the lamp fi xing bolt, � remove the lamp from the outside, � disconnect the lamp connector, � remove the lamp seal, � press the four tabs and remove the bulb holder, � turn the bulb one quarter of a turn and change it. To refi t, carry out these operations in re-verse order. Amber coloured bulbs, such as the direction indicators, must be re-placed with bulbs of identical speci-fi cation and colour.
9!PRACTICAL INFORMATION135 Changing the third brake lamp (LEDs) For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualifi ed workshop. Changing the number plate lamp bulbs (W 5 W) � Insert a thin screwdriver in one of the exterior holes of the lens. � Push it towards the outside to unclip it. � Remove the lens. � Pull the bulb and change it. High pressure washing When using this type of washing on stubborn dirt, do not persist on the headlamps, the lamps and their surrounds to avoid damaging their protective coating and seals.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131