Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2012-2014 Comfort Fitting/Removing the Windstop

2COMFORT62 Windstop folded FITTING/REMOVINGTHE WINDSTOP In the "cabriolet" confi guration, the windstop improves comfort in the pas-senger compartment. The vertical part of the windstop can be folded down to improve visibility when reversing. It is supplied folded in four in its protec-tive case. Windstop unfolded Fitting � Clip the ends of the assembly until a click is heard. � Unfold the windstop by opening the two parts to 90° until a click is heard. � Unfold the windstop frame guides. � Engage the guides in the points lo-cated behind the rear seat belts. � Unfold each of the two parts fully.
2iCOMFORT63� Engage the shafts of the windstop frame in the openings in the rear side trim. When installing the windstop for the fi rst time: � position a 10 mm open-ended span-ner on the hexagonal part of the shaft, � tighten or slacken without forcing on each side to adjust the depth set-ting. � Lastly, always check that the wind-stop is retained securely before us-ing it in the "cabriolet" confi guration. Removal � Press and pull on the shaft supports to release the shafts from the open-ings in the rear side trim. It is not necessary to remove the windstop when changing to the "coupé" confi guration.
2COMFORT64� Pull the windstop forwards to release the guides from the points located behind the rear seat belts. � Fold the windstop frame guides. � Fold the windstop closing the two large parts on themselves. � Unclip each end individually. � Fold each of the two parts on them-selves. Storing � Store the windstop folded in its pro-tective case. � Use the strap intended to secure the case on the right-hand side of the boot (refer to the "Boot fi ttings" section).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131