Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2012-2014 Checks Bonnet

8iCHECKS117BONNET Protects the components of the engine and provides access for checking levels. � Push the exterior safety catch B to the left and raise the bonnet. � Unclip the stay C from its housing . � Fix the stay in one of the two notches to hold the bonnet open. Closing � Take the stay out of the support notch. � Clip the stay in its housing. � Lower the bonnet and release it at the end of its travel. � Pull on the bonnet to check that it is secured correctly. RUNNING OUT OF FUEL (DIESEL) Opening � Open the front left door. � Pull the interior release lever A , located at the bottom of the door frame. The location of the interior release lever prevents opening of the bonnet while the front left door is closed. When the engine is hot, handle the exterior safety catch and bonnet stay with care (risk of burns). 1.6 litre HDi engine � Fill the fuel tank with at least fi ve li-tres of diesel. � Open the bonnet. � If necessary, unclip the styling cover for access to the priming pump. � Squeeze and release the priming pump repeatedly until resistance is felt (there may be resistance at the fi rst press). �Operate the starter until the engine starts (if the engine does not start at the fi rst attempt, wait around 15 seconds before trying again). � If the engine does not start after a few attempts, operate the priming pump again then start the engine. � Clip the styling cover back in place. � Close the bonnet. On vehicle fi tted with HDi engines, the fuel system must be primed if you run out of fuel; refer to the engine compart-ment view on the "Diesel engine" page. If the tank on your vehicle is fi tted with a misfuel prevention device, refer to the section "Access - § Misfuel prevention (Diesel)". If the engine does not start fi rst time, don't keep trying. Start the procedure again from the beginning.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131