Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2012-2014 Access

3!iACCESS Deadlocking renders the exterior and interior door controls inopera-tive. It also deactivates the manual cen-tralised control button. Therefore, do not leave anyone inside the vehicle when it is dead-locked. If one of the doors or the boot is still open, the central locking does not take place. REMOTE CONTROL KEY System which permits central unlocking or locking of the vehicle using the lock or remotely. It also locates and starts the vehicle, as well as providing protec-tion against theft. Unfolding the key � First press button A to unfold the key. Unlocking the vehicle Unlocking is confi rmed by rapid fl ashing of the direction indicators for approxi-mately two seconds. According to version, the door mirrors unfold at the same time. Locking the vehicle Deadlocking using the remote control � Press the closed padlock to lock the vehicle. � Press the closed padlock again within fi ve seconds to deadlock the vehicle. � Press the open padlock to unlock the vehicle. Unlocking using the key � Turn the key to the left in the driver's door lock to unlock the vehicle. � Press the closed padlock to lock the vehicle. Normal locking using the key � Turn the key to the right in the driv-er's door lock to lock the vehicle. Locking is confi rmed by fi xed lighting of the direction indicators for approximate-ly two seconds. According to version, the door mirrors fold at the same time. Unlocking using the remote control Deadlocking using the key � Turn the key to the right in the driv-er's door lock to lock the vehicle. � Turn the key to the right again within fi ve seconds to deadlock the vehicle. Deadlocking is confi rmed by fi xed lighting of the direction indicators for approximately two seconds. According to version, the door mirrors fold at the same time. Normal locking using the remote control
3iACCESS66 The vehicle will relock automati-cally after thirty seconds unless a door is opened. This system prevents unintentional unlocking. The folding and unfolding of the door mirrors can be deactivated by a PEUGEOT dealer. Folding the key � First press button A to fold the key. Locating your vehicle � Press the closed padlock to locate your locked vehicle in a car park. This is indicated by lighting of the cour-tesy lamp and fl ashing of the direction indicators for a few seconds. Electronic engine immobiliser The key contains an electronic chip which has a special code. When the ignition is switched on, this code must be recognised in order for starting to be possible. This electronic engine immobiliser locks the engine management system a few minutes after the ignition is switched off and prevents starting of the engine by anyone who does not have the key. Anti-theft protection In the event of a fault, you are informed by illumination of this warning lamp, an audible signal and a message in the screen. In this case, your vehicle will not start; contact a PEUGEOT dealer as soon as possible. Keep safely the label attached to the keys given to you on acquisition of the vehicle. � Press the boot unlocking but-ton on the remote control for more than 2 seconds. The boot opens slightly. Unlocking and partially opening the boot
3iACCESS67 Starting the vehicle � Insert the key in the ignition switch. The system recognises the starting code. � Turn the key fully towards the dash-board to position 3 (Starting) . � When the engine starts, release the key. Switching the vehicle off � Immobilise the vehicle. � Turn the key fully towards you to po-sition 1 (Stop) . � Remove the key from the ignition switch. Remote control problem Following disconnection of the vehicle battery, replacement of the remote con-trol battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. � First of all, use the key in the lock to unlock or lock your vehicle. � Then, reinitialise the remote control. If the problem persists, contact a PEUGEOT dealer as soon as possible. Changing the battery Battery ref.: CR1620/3 volts. Reinitialisation � Switch off the ignition. �Turn the key to position 2 (Ignition on) . � Press the closed padlock immedi-ately for a few seconds. � Switch off the ignition and remove the key from the ignition switch. The remote control is fully operational again. If the battery is fl at, you are in-formed by illumination of this warning lamp, an audible signal and a message in the multifunc-tion screen. � Unclip the casing using a coin at the notch. � Slide the fl at battery out of its location. � Slide the new battery into its loca-tion observing the original direction. � Clip the casing. � Reinitialise the remote control. Key in ignition If the key has been left in the igni-tion, an audible signal is heard on opening the driver's door.
3!ACCESS68 Lost keys Visit a PEUGEOT dealer with the vehicle's registration document, your per-sonal identifi cation documents and if possible the key code label. The PEUGEOT dealer will be able to fi nd the key code and the transponder code required to order a new key. Do not throw the remote control bat-teries away, they contain metals which are harmful to the environment. Take them to an approved collection point. Remote control The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it. Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from working and the remote control would have to be reinitialised. The remote control does not operate when the key is in the ignition switch, even when the ignition is switched off, except for reinitialisation. Locking the vehicle Driving with the doors locked may make access to the passenger compart-ment by the emergency services more diffi cult in an emergency. As a safety precaution (with children on board), remove the key from the igni-tion switch when you leave the vehicle, even for a short time. Anti-theft protection Do not make any modifi cations to the electronic engine immobiliser system; this could cause malfunctions. When purchasing a second-hand vehicle Have the pairing of all of the keys in your possession checked by a PEUGEOT dealer, to ensure that only your keys can be used to open and start the vehicle.
3!iACCESS69ALARM System which protects and dissuades against the theft of your vehicle. It pro-vides two types of protection, exterior and interior, as well as an anti-tamper function. Locking the vehicle with full alarm Do not make any modifi cations to the alarm system, this could cause malfunctions. In order to be taken into account, this deactivation must be car-ried out each time the ignition is switched off. In the "cabriolet" confi guration, the interior protection is deactivated automatically. Locking the vehicle with perimiter protection only Activation � Switch off the ignition and get out of the vehicle. � Lock or deadlock the vehicle using the locking button on the remote control. The alarm is activate; the indicator lamp on button Afl ashes once per second. The perimiter protection is activated 5 seconds after pressing the locking button on the remote control. The volumetric protection is activated 45 seconds after pressing the locking button on the remote control. If a door or the boot is open or not properly closed, the vehicle is not locked, but the perimiter protection will be activated after 45 seconds at the same time as the volumetric protection. Exterior perimeter protection The system detects opening of the ve-hicle. The alarm is triggered if anyone tries to enter the vehicle by forcing a door, the boot or the bonnet. Interior volumetric protection The system detects any variation in the volume in the passenger compartment. The alarm is triggered if anyone breaks a window or moves inside the vehicle. If you wish to leave a pet in the vehicle or a window partially open, deactivate the interior protection. Anti-tamper function The system detects the putting out of service of its components. The alarm is triggered if anyone tries to put the wires of the siren, the central control or the battery out of service. Deactivation � Unlock the vehicle using the unlock-ing button on the remote control. The alarm is deactivated; the indicator lamp on button A switches off. Deactivation of the interior volumetric protection � Switch off the ignition. � Within ten seconds, press button A un-til the indicator lamp is lit continuously. � Get out of the vehicle. � Quickly lock or deadlock the vehicle using the locking button on the re-mote control. The exterior perimeter protection alone remains activated; the indicator lamp on button Afl ashes once per second.
3!ACCESS70 Triggering of the alarm This is indicated by sounding of the si-ren and fl ashing of the direction indica-tors for approximately thirty seconds. After it has been triggered, protection is again operational. If the alarm is triggered ten times in succession, the eleventh time will result in it becoming inactive. If the indicator lamp on button Afl ashes rapidly, this indicates that the alarm was triggered during your absence. When the ignition is switched on, this fl ashing stops im-mediately. To avoid triggering the alarm when washing your vehicle, lock it using the key in the driver's door lock. Failure of the remote control � Unlock the vehicle using the key in the driver's door lock. � Open the door; the alarm is trig-gered. � Switch on the ignition; the alarm stops. * According to country. Malfunction When the ignition is switched on, light-ing of the indicator lamp on button A for ten seconds indicates a siren fault. Have it checked by a PEUGEOT dealer or a qualifi ed workshop. Locking the vehicle without activating the alarm � Lock or deadlock the vehicle using the key in the driver's door lock. Automatic operation * Depending on the legislation in force in your country, one of these cases may occur: - 45 seconds after the vehicle is locked using the remote control, the alarm is activated, regardless of the status of the doors and boot. - 2 minutes after the last door or the boot is closed, the alarm is activated. � To avoid triggering the alarm on entering the vehicle, fi rst press the unlocking button on the remote control. Reactivation of the interior protection � Unlock the vehicle using the unlock-ing button on the remote control. � Lock the vehicle again using the re-mote control. The alarm is activate again with both types of protection; the indicator lamp on button Afl ashes once per second.
3!iACCESS71WINDOW CONTROLS System which opens or closes a win-dow manually or automatically. It is fi t-ted with a system which controls all four windows on all models. 1.Driver's electric windows switch.2.Passenger's electric windows switch. Each window switch controls, on its own side, the front window and the rear quarter light. One-touch electric windows You have two options: The windows (except the driver's window) do not have an automatic mode or safety anti-pinch function for closing. For your safety, the windows rise in several stages; however, always be vigilant. The window control switches re-main operational for approximate-ly 45 seconds after the ignition is switched off or until a door is opened. � Press or pull switch 1 . The window stops as soon as the switch is released. The rear quarter light only opens once the front window has opened completely. Electric windows - manual mode� Press or pull switch 1 gently. The window stops as soon as the switch is released. The rear quarter light only opens once the front window has opened completely. - automatic mode� Press switch 1 fully. The window opens or closes completely when the switch is released. � Pressing the switch again stops the movement of the window. � If you continue to press the switch, the rear quarter light will open or close.
3!iiACCESS72 Switch for all four windows This switch opens or closes all of the windows. Reinitialisation Following reconnection of the battery or in the event of a malfunction you must reinitialise the operation of the electric windows: � release the switch and pull it again until it closes completely, � hold the switch for approximately one second after closing, � press the switch to lower the win-dow automatically, � when the window has reached the low position, press the switch again for approximately one second. Always remove the key from the ignition when leaving the vehicle, even for a short time. In the event of contact during operation of the windows, you must reverse the movement of the win-dow. To do this, press the switch concerned. When the driver operates the pas-senger electric window switches, they must ensure that no one is preventing correct closing of the windows. The driver must ensure that the passengers use the electric win-dows correctly. Be aware of children when opera-ting the windows. � Press switch 3 and release it. The windows open completely. � Pressing the switch again stops the movement of the windows. or � Pull switch 3 and hold it in this posi-tion. The windows close completely. � If you release the switch before the windows have closed completely, the windows stop. This switch is operated under the full responsibility of the driver. This procedure reinitialises the operation of the electric windows and the automatic partial opening of the door windows
3!ii!ACCESS73DOORS� After unlocking the vehicle using the remote control or the key, pull the door handle. The window lowers automatically by a few millimetres when the door is opened. From inside � Pull the door control to open the door; this unlocks the doors only. The window lowers automatically by a few millimetres when the door is opened. The interior door controls do not operate when the vehicle is dead-locked. Closing The window rises automatically after a few seconds and adjusts to ensure per-fect sealing on closing. If a door is not closed correctly: - when the engine is running , this warning lamp comes on, accompanied by a message on the multifunction screen for a few seconds, - when the vehicle is moving (speed above 6 mph (10 km/h)), this warn-ing lamp comes on, accompanied by an audible signal and a message on the multifunction screen for a few seconds. If you leave the door open for more than one minute, the window rises again. Pull the handle again to reactivate the system. The boot does not unlock at the same time as the doors (refer to the "Boot" section). When washing your vehicle, avoid spraying the upper part of the windows. Opening From outside
3iiACCESS If the vehicle is locked or dead-locked from the outside, the red indicator lamp fl ashes and button Ais inactive. � In this case, use the remote control or the key to unlock the vehicle. Manual centralised control System which provides full manual lock-ing or unlocking of the doors and boot from the inside. Locking � Press button A to lock the vehicle. The red indicator lamp on the button comes on. If one of the doors is open, the cen-tral locking from the inside does not take place. Unlocking � With the key in the ignition, press button A again to unlock the vehicle. The red indicator lamp on the button switches off.
3!ACCESS Emergency control System which locks or unlocks the doors mechanically in the event of a malfunc-tion of the central locking. � Insert the key in the lock, located on the edge of the door, then turn it one eighth of a turn . Locking the driver's door � Insert the key in the lock, then turn it to the right. Unlocking the driver's door � Insert the key in the lock, then turn it to the left. Locking the passenger door Unlocking the passenger door �Pull the interior door opening control. If one of the doors is open, the au-tomatic central locking does not take place. If the boot is open, the automatic central locking of the doors is active. Anti-intrusion security System which provides full automatic locking or unlocking of the doors and boot while driving. You can activate or deactivate this function. Activation � Press this button for more than two seconds. A confi rmation message appears in the multifunction screen. Unlocking � Above 6 mph (10 km/h), press this button to unlock the doors and boot temporarily. Locking When the speed exceeds 6 mph (10 km/h), the doors and boot lock au-tomatically. Deactivation � Press this button again for more than two seconds. A confi rmation message appears in the multifunction screen.
3iiACCESS76BOOT Opening � After unlocking the boot or the vehi-cle using the remote control or the key, pull the handle and raise the boot lid. Unlocking and partially opening the boot � Press the boot unlocking button on the remote control for more than two seconds. The boot opens slightly. If a battery failure occurs, the boot is locked. Contact a PEUGEOT dealer or a qualifi ed workshop. Boot anti-theft protection The boot is designed to remain secure, even in the "cabriolet" confi guration. So, when the vehicle is locked and the roof is open, the boot cannot be un-locked: - by means of the interior door opening control, when the key is not in the ignition switch, - by pressing the manual centralised control A , when the key is not in the ignition switch. - when the engine is running , this warning lamp comes on, accompanied by a message on the multifunction screen for a few seconds, - when the vehicle is moving (speed above 6 mph (10 km/h)), this warn-ing lamp comes on, accompanied by an audible signal and a message on the multifunction screen for a few seconds. Closing � Lower the boot lid using the interior grab handle. If the boot lid is not closed correctly: Automatic locking of the boot In the "cabriolet" confi guration, with the vehicle locked, if you unlock the boot by pressing the boot unlock-ing button on the remote control, it will lock automatically when you close it again. In this case, if you inadvertently leave the key in the boot, press the manual centralised control A im-mediately to unlock the boot and retrieve the key.
3iACCESS77 The key cannot be removed from the lock until the cap is refi tted. FUEL TANKFuel tank capacity: approximately 50 litres (petrol) or 48 litres (Diesel). Opening the fi ller cap may create a noise caused by an inrush of air. This vacuum is entirely normal, resulting from the sealing of the fuel system. To fi ll the tank safely: �the engine must be switched off,� open the fuel fi ller fl ap, � insert the key in the cap, then turn it to the left, When you have fi lled the tank: � put the cap back in place, � turn the key to the right, then remove it from the cap, � close the fl ap. � remove the cap and hook it onto the clip located on the inside of the fl ap, �fi ll the tank, but do not continue after the 3rd cut-off of the pump ; this could cause malfunctions. Low fuel level When the fuel tank minimum level is reached this warning lamp comes on on the instru-ment panel. When it fi rst comes on there remains approximate-ly 5 litres of fuel in the tank. You must refuel as soon as possible to avoid running out of fuel. If you run out of fuel (Diesel), refer also to the "Checks" section. Filling A label affi xed to the inside of the fl ap reminds you of the type of fuel to be used depending on your engine. Additions of fuel must be of at least 5 litres, in order to be taken into account by the fuel gauge.
3DIESELACCESS78 Quality of the fuel used for petrol engines Quality of the fuel used for Diesel engines The petrol engines are perfectly com-patible with E10 or E24 type petrol biofuels (containing 10 % or 24 % etha-nol), conforming to European standards EN 228 and EN 15376. E85 type fuels (containing up to 85 % ethanol) are reserved exclusively for ve-hicles marketed for the use of this type of fuel (BioFlex vehicles). The quality of the ethanol must comply with European standard EN 15293. For Brazil only, special vehicles are marketed to run on fuels containing up to 100 % ethanol (E100 type). The Diesel engines are perfectly com-patible with biofuels which conform to current and future European standards (Diesel fuel which complies with stand-ard EN 590 mixed with a biofuel which complies with standard EN 14214) available at the pumps (containing up to 7 % Fatty Acid Methyl Ester). The B30 biofuel can be used in cer-tain Diesel engines; however, this use is subject to strict application of the special servicing conditions. Contact a PEUGEOT dealer or a qualifi ed work-shop. The use of any other type of (bio)fuel (vegetable or animal oils, pure or diluted, domestic fuel...) is strictly prohibited (risk of damage to the engine and fuel system).
3iiiACCESS79MISFUEL PREVENTION(DIESEL) * Mechanical device which prevents fi ll-ing the tank of a Diesel vehicle with petrol. It avoids the risk of engine dam-age that can result from fi lling with the wrong fuel. Located in the fi ller neck, the misfuel prevention device appears when the fi ller cap is removed. Operation When a petrol fi ller nozzle is introduced into the fuel fi ller neck of your Diesel vehicle, it comes into contact with the fl ap. The system remains closed and prevents fi lling. Do not persist but introduce a Diesel type fi ller nozzle. It remains possible to use a fuel can to fi ll the tank. In order to ensure a good fl ow of fuel, do not place the nozzle of the fuel can in direct contact with the fl ap of the misfuel prevention de-vice and pour slowly. * According to country of sale. Travelling abroad As Diesel fuel pump nozzles may be different in other countries, the presence of the misfuel prevention device may make refuelling impos-sible. Before travelling abroad, we recommend that you check with the PEUGEOT dealer network, whether your vehicle is suitable for the fuel pumps in the country in which you want to travel. Deactivation Before refuelling using non-standard Diesel fuel nozzles (present in some countries), a tool allows you to tem-porarily disable the misfuel prevention device. Use � Introduce the tool into the fi ller neck as far as the handle will allow. � Remove the tool completely. � Fill with fuel. The misfuel prevention device will be activated the next time a stand-ard nozzle is used.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131