Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Visibility Lighting Control Stalk

482VISIBILITYLIGHTING CONTROL STALK System for selection and control of the various front and rear lamps providing the vehicle's lighting. Manual controls The lighting commands are made di-rectly by the driver by means of ring Aand stalk B . lighting off, sidelamps only, dipped or main beam headlamps, B. stalk for inversion of the beam by pull-ing: dipped headlamps/main beam headlamps. In the lighting off and sidelamps modes, the driver can switch on the main beam headlamps directly ("headlamp fl ash") by pulling and holding the stalk. Displays The corresponding indicator lamp comes on in the instrument panel to confi rm the switching on of the lighting selected. Main lighting The vehicle's various front and rear lamps are designed to adapt the driver's visibility gradually in relation to the cli-matic conditions: - sidelamps, to be seen, - dipped beam headlamps to see without dazzling other drivers, - main beam headlamps for good vis-ibility when the road is clear. Additional lighting Other lamps are installed to respond to particular driving conditions: - rear foglamps to be seen from a dis-tance, - front foglamps for even better visibility. Programmes Various automatic lighting control modes are also available according to the following options: - "guide-me-home" lighting, - automatic lighting. A. main lighting mode selection ring, with: Model without AUTO lighting Model with AUTO lighting automatic illumination of headlamps.
4!i83VISIBILITY Model with rear foglamps only Model with front and rear foglamps front and rear foglamps rear foglamps C. foglamps selection ring. These operate with the dipped and main beam headlamps. � To switch on the foglamps, turn ring C forwards. When the lighting is switched off au-tomatically (on AUTO model), the fo-glamps and the dipped headlamps will remain on. � To switch off all of the lighting turn ring C rearwards. � To switch on the foglamps, turn ring C forwards. � To switch off the rear foglamps, turn ring C rearwards twice in succession. When the lighting is switched off au-tomatically (on AUTO model) or when the dipped headlamps are switched off manually, the foglamps and the side-lamps will remain on. � Turn the ring rearwards to switch off the foglamps, the sidelamps will then switch off. In good weather or in rain, both day and night, the front foglamps and the rear foglamps are prohib-ited. In these situations, the in-tensity of their beams may dazzle other drivers. Do not forget to switch off the front fo-glamps and the rear foglamps when they are no longer necessary. Lighting on reminder The triggering of an audible signal when a front door is opened warns the driver that they have forgotten to switch off the vehicle's lighting, with the ignition off. In this case, switching off the light-ing will stop the audible signal. When the ignition is switched off, if the dipped headlamps remain on, they will be switched off automati-cally after thirty minutes to prevent discharging of the battery.
4!84VISIBILITY In fog or snow, the sunshine sen-sor may detect suffi cient light. Therefore, the lighting will not come on automatically. Do not cover the sunshine sen-sor, coupled with the rain sensor and located in the centre of the windscreen behind the rear view mirror; the associated functions would no longer be controlled. Coupling with the "Guide-me-home" lighting Association with the automatic illumination of headlamps provides the "guide-me-home" lighting with the following additional options: - selection of the lighting duration to 15, 30 or 60 seconds in the vehicle parameters in the multifunction screen confi guration menu, - automatic activation of "guide-me-home" lighting when automatic illumination of headlamps is in operation. Automatic illumination of headlamps The sidelamps and dipped beam head-lamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected (sensor behind the rear view mirror) or when the windscreen wipers are switched on. As soon as the brightness returns to a suffi cient level or after the windscreen wipers are switched off, the lighting is switched off automatically. "Guide-me-home" lighting The dipped headlamps remain on tem-porarily, after switching off the vehicle's ignition, to make the driver's exit easier in poor light. Activation � With the ignition off, activate a "headlamp fl ash" using stalk B . � A second "headlamp fl ash" switches the function off again. Switching off The "guide-me-home" lighting is switched off automatically following the door lock-ing command, after a given time. Activation � Turn ring A to the " AUTO " position. The automatic illumination of headlamps is accompanied by a message in the multifunction screen. Operating fault In the event of a malfunction of the brightness sensor, the light-ing comes on accompanied by the service warning lamp, an audible signal and a message on the multifunction screen. Have it checked by a PEUGEOT dealer or a qualifi ed workshop. Daytime running lamps * On vehicles fi tted with daytime running lamps, the dipped headlamps come on when the vehicle is started. This indicator lamp comes on in the instrument panel. The instruments and controls (multi-function screen, air conditioning control panel, ...) are not lit, unless the auto-matic lighting mode is activated or the lighting is switched on manually. Deactivation � Turn ring A to a position other than " AUTO ". Deactivation is accompa-nied by a message in the multifunction screen. * According to country.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131