Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Safety Seat Belts

6SAFETY105SEAT BELTS Height adjustment Seat belt not fastened/unfastened warning lamp on the instrument panel Fastening � Pull the strap, then insert the tongue in the buckle. � Check that the seat belt is fastened correctly by pulling the strap. � To lower the attachment point, squeeze control A and slide it downwards. � To raise the attachment point, slide control A upwards. When the ignition is switched on, this warning lamp comes on on the instrument panel if the driver has not fastened their seat belt. Above approximately 12 mph (20 km/h) and for two minutes, this warning lamp fl ashes accompanied by an audible signal of increasing volume. When the two minutes have elapsed, this warning lamp remains on until the driver fastens their seat belt. This warning lamp comes on on the in-strument panel if one or more passengers unbuckle their seat belt. Unfastening � Press the red button on the buckle. Front seat belts The front seat belts are fi tted with a pre-tensioning and force limiting system. This system improves safety in the front seats in the event of front impacts. De-pending on the severity of the impact, the pretensioning system instantly tight-ens the seat belts against the body of the occupants. The pretensioning seat belts are active when the ignition is on. The force limiter reduces the pressure of the seat belt on the chest of the oc-cupant, increasing his protection. On the 5-door versions, a slider, fi tted on the seat belt, makes it possible to support the buckle as close as possible to the upper mounting.
6SAFETY1061. Front left seat belt warning lamp. 2. Front right seat belt warning lamp. 3. Rear left seat belt warning lamp. 4. Rear centre seat belt warning lamp. 5. Rear right seat belt warning lamp. On the central panel, the corresponding warning lamp 1 or 2 comes on in red if the seat belt is not fastened or is unfas-tened. When the engine is running, the corre-sponding warning lamp 1 or 2 comes on in red, accompanied by an audible sig-nal and a message on the multifunction screen, if a front occupant has unfas-tened their seat belt. Seat belt not fastened/unfastened warning lamp panel Rear seat belts The rear seats are fi tted with three, three point, inertia reel seat belts. Seat belt unfastened warning lamp panel When the ignition is switched on, the corresponding warning lamps 3, 4 and 5come on for approximately 30 seconds in red if the seat belt is not fastened. When the engine is running, the corre-sponding warning lamp 3, 4 or 5 comes on in red, accompanied by an audible signal and a message on the multifunc-tion screen, if a rear passenger has unfastened their seat belt. Fastening � Pull the strap, then insert the tongue in the buckle. � Check that the seat belt is fastened correctly by pulling the strap. Unfastening � Press the red button on the buckle.
6iSAFETY107 The driver must ensure that the passengers use the seat belts cor-rectly and that they are all properly restrained before setting off. Wherever you are seated in the ve-hicle, always fasten your seat belt, even for short journeys. Do not invert the seat belt buckles as they will not fulfi l their role fully. If the seats have armrests * , the lap part of the seat belt must always pass under the armrest. The seat belts are fi tted with an in-ertia reel permitting automatic ad-justment of the length of the strap to your size. The seat belt is stored automatically when not in use. Before and after use, ensure that the seat belt is reeled in correctly. The lower part of the strap must be positioned as low as possible on the pelvis. The upper part must be positioned in the hollow of the shoulder. The inertia reels are fi tted with an automatic locking device which comes into operation in the event of a collision, on emergency braking or if the vehicle rolls over. You can release the device by pulling rapidly on the strap and releasing it. * According to model. In order to be effective, a seat belt: - must be tightened as close to the body as possible, - must restrain one adult only, - must not bear any trace of cuts or fraying, - must be pulled in front of you with a smooth movement, checking that it does not twist, - must not be transformed or modifi ed to avoid altering its performance. In accordance with current safety regu-lations, all repairs and checks must be carried out by a PEUGEOT dealer who can guarantee that the work is carried out correctly, or qualifi ed workshop. Have your seat belts checked regularly by a PEUGEOT dealer or a qualifi ed workshop and particularly if the straps show signs of damage. Clean the seat belt straps with soapy water or a textile cleaning product, sold by PEUGEOT dealers. After folding or moving a seat or rear bench seat, ensure that the seat belt is positioned and rolled up correctly. Recommendations for children: - use a suitable child seat if the pas-senger is less than 12 years old or shorter than one metre fi fty, - do not use the strap-guide * when a child seat is installed, - never use the same seat belt to secure more than one person, - never allow a child to travel on your lap. Depending on the nature and se-riousness of the impacts , the pre-tensioning device may be triggered before and independently of the air-bags. Triggering of the pre-tensioners is accompanied by a slight emission of harmless smoke and a noise, due to the activation of the pyrotechnic car-tridge incorporated in the system. In all cases, the airbag warning lamp comes on. Following an impact, have the seat belts system checked, and if neces-sary replaced, by a PEUGEOT dealer or a qualifi ed workshop.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131