Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Practical Information Load Reduction / Economy Mode

9iiPRACTICAL INFORMATION155LOAD REDUCTION MODE System which manages the use of cer-tain functions according to the level of charge remaining in the battery. When the vehicle is being driven, the load reduction function temporarily deactivates certain functions, such as the air condition-ing, the heated rear screen... The deactivated functions are reactivat-ed automatically as soon as conditions permit. A fl at battery prevents the engine from starting (refer to the corre-sponding paragraph). If the telephone is being used at this time, it will be maintained for 5 minutes with your Peugeot Connect Sound's Bluetooth system. ENERGY ECONOMY MODE System which manages the duration of use of certain functions to conserve a suffi cient level of charge in the battery. After the engine has stopped, you can still use functions such as the audio equipment, windscreen wipers, dipped beam headlamps, courtesy lamps, etc. for a maximum combined duration of thirty minutes. Exiting economy mode These functions are reactivated auto-matically next time the vehicle is driven. � In order to resume the use of these functions immediately, start the en-gine and let it run for a few minutes. The time available to you will then be double the duration for which the engine is left running. However, this period will al-ways be between fi ve and thirty minutes. Switching to economy mode Once the thirty minutes are over, a message appears on the multifunction screen indicating that the vehicle has switched to economy mode and the ac-tive functions are put on standby. CHANGING A WIPER BLADE Procedure for replacing a worn wiper blade with a new one without the use of tools. Removing a front or rear wiper blade � Raise the corresponding wiper arm. � Unclip the wiper blade and remove it. Fitting a front or rear wiper blade � At the front, check the size of the wiper blade as the shorter blade is fi tted on the right-hand side of the vehicle. � Put the corresponding new wiper blade in place and clip it. � Fold down the wiper arm carefully.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131