Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Practical Information Changing a Bulb

9iiiPRACTICAL INFORMATION142 The headlamps are fi tted with polycar-bonate glass with a protective coating: �do not clean them using a dry or abrasive cloth, nor with a deter-gent or solvent product,� use a sponge and soapy water, � when using a high pressure washer on persistent marks, do not direct at the lamps or their outlines for too long, so as not to damage their pro-tective coating and seals. Front lamps CHANGING A BULB Changing the direction indicator bulbs Amber coloured bulbs, such as the direction indicators, must be re-placed with bulbs of identical spec-ifi cation and colour. � Turn the bulb holder one quarter of a turn and remove it. � Pull the bulb then change it. To refi t, carry out these operations in re-verse order. 1.Direction indicators (PY21W amber).2.Sidelamps (W5W).3.Dipped beam headlamps (H7-55W).4.Main beam headlamps (H1-55W).5.Foglamps (H11-55W).� Do not touch the bulb directly with your fi ngers, use lint-free cloths. Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns). It is imperative to use only anti-ultraviolet (UV) type bulbs in order not to damage the headlamp. Always replace a failed bulb with a new bulb with the same type and specifi cation. In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the head-lamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.
9PRACTICAL INFORMATION143 Changing the sidelamp bulbs � Disconnect the main headlamp con-nector. � Remove the plastic protective cover by pulling on the tab. � Turn the bulb holder one quarter of a turn and remove it. � Pull the bulb and change it. To refi t, carry out these operations in re-verse order. Changing the dipped or main beam headlamp bulbs � Disconnect the main headlamp con-nector. � Remove the corresponding plastic protective cover by pulling on the tab. � Disconnect the connector of the cor-responding lamp. � Move aside the spring to release the bulb and remove the bulb. To refi t, carry out these operations in re-verse order. Changing the foglamp bulbs For replacement of these bulbs, contact a PEUGEOT dealer or a qualifi ed workshop. Changing the integrated direction indicator side repeaters � Insert a screwdriver towards the centre of the repeater between the repeater and the base of the mirror. � Tilt the screwdriver to extract the re-peater and remove the repeater. � Disconnect the repeater connector. To refi t, carry out these operations in re-verse order. To obtain a replacement repeater, contact a PEUGEOT dealer or a qualifi ed work-shop.
9iPRACTICAL INFORMATION144 Rear lamps (Saloon) 1.Brake lamps (P 21 W).2.Sidelamps (LEDs).3.Foglamps (P 21 W).4.Direction indicators (PY 21 W amber).5.Reversing lamps (R 10 W). Changing bulbs These bulbs (with the exception of the LED lamps) are changed from outside the boot: � remove the lamp fi xing bolt, � remove the lamp from the outside, � disconnect the lamp connector, � remove the lamp seal, � press the four tabs and remove the bulb holder, � turn the bulb one quarter of a turn and change it. Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifi cation and colour. For the replacement of LED lamps, contact a PEUGEOT dealer or a qualifi ed workshop. To refi t, carry out these operations in re-verse order.
9!PRACTICAL INFORMATION145 Changing the third brake lamp bulbs (4 bulbs W 5 W) � Press on the fi xing pins on each side of the lamp. � Remove the lamp from the outside. � Turn the bulb holder which corresponds to the faulty bulb one quarter of a turn and remove it. � Pull the bulb and change it. Changing the number plate lamp bulbs (W 5 W) � Insert a thin screwdriver in one of the exterior holes of the lens. � Push it towards the outside to unclip it. � Remove the lens. � Pull the bulb and change it. To refi t, carry out these operations in re-verse order. High pressure washing When using this type of washing on stubborn dirt, do not persist on the headlamps, the lamps and their surrounds, to avoid damag-ing their protective coating and seals.
9iPRACTICAL INFORMATION146 Rear lamps (SW) 1.Brake lamps (P 21 W).2.Sidelamps (R 5 W).3.Direction indicators(PY 21 W amber).4.Foglamps (P 21 W).5.Reversing lamps (R 10 W). Changing bulbs These fi ve bulbs are changed from out-side the boot: � remove the access fl ap, � disconnect the lamp connector, � remove the lamp fi xing bolt, � take out the lamp from the outside, � press on the four tabs and remove the bulb holder, � turn the bulb a quarter of a turn and change it. To refi t, carry out these operations in re-verse order. Take care to engage the lamp in its guides keeping it in the centreline of the vehicle. Tighten the fi xing bolt suffi ciently by hand to guarantee the sealing of the lamp. Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifi cation and colour.
9!PRACTICAL INFORMATION147 Changing the third brake lamp bulbs (4 bulbs W 5 W) � Remove the two lamp fi xing nuts. � Remove the lamp from the outside. � Press on the two tabs and remove the bulb holder � Pull the bulb and change it. To refi t, carry out these operations in re-verse order. Tighten the fi xing bolt suffi ciently by hand to guarantee the sealing of the lamp. Changing the number plate bulbs (W 5 W) � Insert a thin screwdriver into one of the exterior holes of the lens. � Push it towards the outside to unclip it � Remove the lens. � Pull the bulb and change it. High pressure washing When using this type of washing on stubborn dirt, do not persist on the headlamps, the lamps and their surrounds, to avoid damag-ing their protective coating and seals.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131