Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Instruments and Controls Monochrome Screen A

1INSTRUMENTS and CONTROLS33 Displays on the screen This displays the following information: - time, - date, - ambient temperature * (this fl ashes if there is a risk of ice), - status of the openings (doors, boot, ...), - trip computer (refer to the end of the section). Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Boot open") may ap-pear temporarily. These can be cleared by pressing the "ESC" button. PEUGEOT CONNECT SOUND) Controls Main menu There are three display control buttons: - "ESC" to abandon the operation in progress, - "MENU" to scroll through the menus or sub-menus, - "OK" to select the menu or sub-menu required. � Press the "MENU" button to scroll through the various menus of the main menu : - vehicle confi guration, - options, - display settings, - language, - units. � Press the "OK" button to select the menu required. * With air conditioning only.
1!34 Options Once the "Options" menu has been selected, you can start diagnostics of the status of the equipment (active, not active, faulty). Language Once the "Language" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Portugues, Portugues-Brasil, Deutsch, English, Espanol). Display settings Once the "Display settings" menu has been selected, you can gain access to the following settings: - year, - month, - day, - hour, - minutes, - 12 or 24 hour mode. � Wait for approximately ten sec-onds without any action to allow the changed data to be recorded or press the "ESC" button to cancel. The screen then returns to the normal display. Once the "Vehicle confi guration" menu has been selected, you can activate or deactivate the following equipment: - wiper linked with reverse gear (refer to the "Visibility" section), - "guide-me-home" lighting (refer to the "Visibility" section). For safety reasons, confi guration of the multifunction screen by the driver must only be done when stationary. Units Once the "Units" menu has been se-lected, you can change the units of the following parameters: - temperature (°C or °F), - fuel consumption (l/100 km, mpg or km/l). Vehicle confi guration � Once you have selected a setting, press the "OK" button to change its value.
1INSTRUMENTS and CONTROLS35 MONOCHROME SCREEN A (WITHPEUGEOT CONNECT SOUND) Controls Displays in the screen This displays the following information: - time, - date, - ambient temperature * (this fl ashes if there is a risk of ice), - status of the openings (doors, boot, ...), - audio sources (radio, CD, ...), - trip computer (refer to the end of the section). Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Boot open") may ap-pear temporarily. These can be cleared by pressing the "ESC" button. Main menu � Press the "MENU" button for access to the main menu , then press the " � " or " � " buttons to scroll through the various menus: - radio-CD, - vehicle confi guration, - options, - display settings, - language, - units. � Press the "OK" button to select the menu required. From the audio equipment control panel, you can: � press the "MENU" button to gain access to the main menu , � press the " � " or " � " buttons to scroll through the items on the screen, � press the "MODE" button to change the permanent application (trip com-puter, audio source, ...), � press the " � " or " � " buttons to change a setting value, � press the "OK" button to confi rm, or � press the "ESC" button to abandon the operation in progress. Radio-CD With the audio equipment switched on, once the "Radio-CD" menu has been selected you can activate or deactivate the functions linked with use of the ra-dio (RDS, REG) or the CD (introscan, shuffl e, CD repeat). For more information on the "Radio-CD" application, refer to the Peugeot Connect Sound part of the "Audio and Telematics" section. * With air conditioning only.
1!36 For safety reasons, confi guration of the multifunction screen by the driver must only be done when stationary. Display settings Once the "Display settings" menu has been selected, you can gain access to the following settings: - year, - month, - day, - hour, - minutes, - 12 or 24 hour mode. Language Once the "Language" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Portugues, Portugues-Brasil, Deutsch, English, Espanol). Units Once the "Units" menu has been se-lected, you can change the units of the following parameters: - temperature (°C or °F), - fuel consumption (l/100 km, mpg or km/l). � Once you have selected a setting, press the " � " or " � " buttons to change its value. � Press the " � " or " � " buttons to switch respectively to the previous or next setting. � Press the "OK" button to record the change and return to the normal display or press the "ESC" button to cancel. Vehicle confi guration Options Once the "Options" menu has been selected, you can start diagnostics of the status of the equipment (active, not active, faulty). Once the "Vehicle Confi guration" menu has been selected, you can activate or deactivate the following equipment: - wiper linked with reverse gear (refer to the "Visibility" section), - "guide-me-home" lighting (refer to the "Visibility" section).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131