Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Driving Cruise Control

7iDRIVING119CRUISE CONTROL System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal. The cruise control is switched onmanually: it requires a minimum vehicle speed of 25 mph (40 km/h), as well as the engaging of: - fourth gear on a manual gearbox, - second gear on an automatic gear-box in sequential mode, - position D on an automatic gear-box. The cruise control is switched off man-ually or by pressing the brake or clutch pedal or on triggering of the ESP sys-tem for safety reasons. It is possible to exceed the programmed speed temporarily by pressing the ac-celerator pedal. To return to the programmed speed, simply release the accelerator pedal. Switching off the ignition cancels any programmed speed value. The controls of this system are grouped together on stalk A . 1. Cruise control mode selection dial 2. Value decrease button 3. Value increase button 4. Cruise control off/resume button The programmed information is grouped together in the instrument pan-el screen. 5. Cruise control off/resume indication 6. Cruise control mode selection indi-cation 7. Programmed speed value Steering mounted controls Displays in the instrument panel The cruise control cannot, in any cir-cumstances, replace the need to re-spect speed limits, nor can it replace the need for vigilance and responsi-bility on the part of the driver. You are advised to keep your feet near the pedals at all times.
7!DRIVING120 When the cruise control is switched on, be careful if you maintain the pressure on one of the programmed speed changing buttons: this may result in a very rapid change in the speed of your vehicle. Do not use the cruise control on slippery roads or in heavy traffi c. On a steep descent, the cruise control will not be able to prevent the vehicle from exceeding the programmed speed. To avoid any risk of jamming of the pedals: - ensure that the mat is posi-tioned correctly, - never fi t one mat on top of an-other. Programming � Turn dial 1 to the "CRUISE" po-sition: the cruise control mode is selected but is not switched on (OFF). Exceeding the programmed speed Intentional or unintentional exceeding of the programmed speed results in fl ashing of this speed on the display. Return to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically can-cels the fl ashing of the speed. Return to normal driving � Turn dial 1 to the "0" position: the cruise control mode is deselected. The display returns to the distance recorder. Operating fault In the event of a cruise control malfunction, the speed is cleared resulting in fl ashing of the dashes. Contact a PEUGEOT dealer or a qualifi ed workshop to have the system checked. � Set the programmed speed by ac-celerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)). � Switch off the cruise control by pressing button 4 : the display confi rms that it has been switched off (OFF). � Switch the cruise control back on by pressing button 4again. You can then change the programmed speed using buttons 2 and 3 : - by + or - 1 mph (km/h) = short press, - by + or - 5 mph (km/h) = long press, - in steps of + or - 5 mph (km/h) = maintained press.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131