Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Comfort Rear Seats

2!iCOMFORT54REAR SEATS Bench seat the left-hand part (2/3) or right-hand part (1/3) of which can be folded to adapt the load space in the boot. Never drive with the head re-straints removed; they must be in place and correctly adjusted. As the head restraints are not in-terchangeable, take care to put them back in their original position when refi tting. Rear head restraints These have a high position (comfort) and a low position (rear visibility). The command for activation of heating of the seat(s) remains memorised for two minutes after the ignition has been switched off. 7. Heated seats switch With the engine running, the front seats can be heated separately. � Use the adjustment dial, placed on the side of each front seat, to switch on and select the level of heating re-quired: 0 : Off. 1 : Low. 2 : Medium. 3 : High. They can also be removed; to remove them: � pull the head restraint upwards to the stop, � then, press the lug. 6. Armrests (except 3 door) These can be folded down and are re-movable. � To remove an armrest, press the but-ton located between the armrest and the side of the seat and pull it off.
2!iCOMFORT55 Folding the seat (Saloon) To avoid damaging a seat when folding it, always start with the seat cushion, never the seat back : � move the corresponding front seat forward if necessary, � raise the front of the seat cushion 1 , � tilt the seat cushion 1 against the front seat, � check that the seat belt is positioned correctly on the side of the seat back, Repositioning the seat (Saloon) When repositioning the rear seat: � straighten the seat back 3 and se-cure it, � fold back the seat cushion 1 . � pull control 2 upwards to release the seat back 3 , � place the head restraints in the low po-sition or remove them if necessary, � tilt the seat back 3 . When repositioning the rear seat, take care not to trap the seat belts. The seat cushion 1 can be removed to increase the loading volume. Squeeze the seat cushion fi xings to detach them from their attach-ments.
2!iCOMFORT56 Folding the seat (SW) This operation can be carried out at the rear seats or through the opening rear screen. To avoid damaging a seat when folding it:� move the corresponding front seat forward if necessary, � place the head restraints in the low position, Check that no object could hinder the movement of the bench seat, either above or below. Repositioning the seat (SW) The seat cushion lowers in order to be covered by the seat back; this quickly gives you a fl at boot fl oor. � pull the control 1 forward to release the seat back 2 which folds easily onto the seat cushion 3 . � When repositioning the rear seat, straighten the seat back 2 and lock it. � Check that the red indicator, located at control 1 , is no longer visible.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131