Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Checks Checking Levels

8CHECKS128CHECKING LEVELS Check all of these levels regularly and top them up if necessary, unless other-wise indicated. If a level drops signi cantly, have the corresponding system checked by a PEUGEOT dealer or a quali ed work-shop. Take care when working under the bon-net, as some parts of the engine can be extremely hot (risk of burns). Brake fluid level Oil level The reading will only be correct if the vehicle is on level ground and the engine has been off for more than 30 minutes. The check is carried out either when the ignition is switched on using the oil level indicator on the instrument panel, or using the dipstick. It is normal to top up the engine oil be-tween two services. The manufacturer recommends a check of the oil level, and top up if necessary, every 3 000 miles (5 000 km). The brake uid level should be close to the "MAX" mark. If it is not, check the brake pad wear. Changing the brake uid Refer to the Warranty and Maintenance Record for details of the interval for this operation. Changing the engine oil Refer to the Warranty and Maintenance Record for details of the interval for this operation. In order to maintain the reliability of the engine and emission control system, the use of additives in the engine oil is prohibited. Oil speci cation The oil must correspond to your engine and conform to the manufacturer's rec-ommendations. Fluid speci cation The brake uid must conform to the manufacturer's recommendations and ful l the DOT4 standards.
8!CHECKS129 To avoid any risk of scalding, unscrew the cap by two turns to allow the pres-sure to drop. When the pressure has dropped, remove the cap and top up the level. Coolant level The coolant level should be close to the "MAX" mark but should nev-er exceed it. When the engine is warm, the tem-perature of the coolant is regulated by the fan. This can operate with the ignition off. On vehicles which are tted with a par-ticle emission lter, the fan may operate after the vehicle has been switched off, even if the engine is cold. In addition, as the cooling system is pres-surised, wait at least one hour after switch-ing off the engine before carrying out any work. Screenwash and headlamp wash * fluid The minimum level of this uid is indicated by an audible sig-nal and a message on the mul-tifunction screen. Top up the level when you stop the vehicle. * According to country. Changing the coolant The coolant does not have to be changed. Fluid speci cation The coolant must conform to the manu-facturer's recommendations. Fluid speci cation To guarantee optimum cleaning and avoid freezing, plain water should not be used to top up or replace this uid. Avoid any prolonged contact of used oil or uids with the skin. Most of these uids are harmful to health or indeed very corrosive. Do not discard used oil or uids into sewers or onto the ground. Take used oil to a PEUGEOT dealer or a quali ed workshop (France) or an authorised waste disposal site. Diesel additive level (Diesel with particle emission filter) The minimum level of this additive is in-dicated by lighting of the service warn-ing lamp, accompanied by an audible signal and a message on the multifunc-tion screen. Used products Topping up This additive must be topped up by a PEUGEOT dealer or a quali ed work-shop without delay.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131