Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2009-2011 Audio Equipment and Telematics Peugeot Connect Navigation

179way that it will only operate in your vehicle. If it is to be installed in another vehicle, contact a PEUGEOT dealer for configuration of the system.Certain functions described in this handbook willbecome available during the year. PEUGEOT CONNECT NAVIGATION For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary. When the engine is switched off and to prevent discharging of the battery, the Peugeot Connect Navigation switches offfollowing the activation of the EnergyEconomy mode. MULTIMEDIA AUDIO SYSTEM/BLUETOOTH TELEPHONE SATELLITE NAVIGATION SYSTEM FOR EUROPE BY SD CARD 01 First steps CONTENTS 02 Steering mounted controls 03 General operation 04 Navigation - Guidance 05 Traffic information 06 Radio 07 Music media players 08 Bluetooth telephone 09 Configuration 10 Trip computer p. p. p. p. p. p. p. p. p. p. 11 Screen menu map Frequently asked questions p. p. 180 181 182 185 193 195 196 199 202 203 204 208
180011551012233446613111199144155778812121611. Engine not running- Short press: on/off.- Long press: CD pause, mute for the radio. Engine running- Short press: CD pause, mute for the radio.- Long press: reinitialisation of the system. 2. Volume adjustment (each source is independent, including also navigation messages and alerts).3. Access to the "Radio" Menu. Display the list ofstations. 4. Access to the "Music"Menu. Display thetracks. 5. Access to the "SETUP" menu. Long press: access to the GPS coverage and thedemonstration mode.6. Access to the "Phone" Menu. Display thecall list. 7. Access to the "MODE" menu. Selection of the successive display of:Radio, Map, NAV (if navigation is inprogress), Telephone (if a conversation is inprogress), Trip computer. Long press: display of a black screen (DARK).8. Access to the "Navigation" Menu. Displaythe last destinations.9. Access to the "Traffi c" Menu. Display thecurrent trafficalerts. 10. ESC: abandon the operation in progress. 11. CD eject. 12. Selection of the previous/next radio station from the list.Selection of the previous/next MP3 folder. Selection of the previous/next page of a list. 13. Selection of the previous/next radio station. Selection of the previous/next CD or MP3 track.Selection of the previous/next line of a list. 14. Buttons 1 to 6: Selection of thestored radiostation.Long press: store the current radio station. 15. SD card reader (navigation SD card only). 16. Dial for selection of the screen display andaccording to the context of the menuShort press: contextual menu or confi rmation. Long press press: contextual menu specifi c to the list displayed. FIRST STEPS Peugeot Connect Navigation CONTROL PANEL 3 - 4. Long press: access to the audio settings:front/rear fader and left/right balance,bass/treble, equaliser, loudness, automatic volume adjustment, initialise the settings.
18102 STEERING MOUNTED CONTROLS RADIO: selection of the previous stored station. Selection of the previous entry in the address book. RADIO: selection of the next stored station. Selection of the next entry in the address book. RADIO: change to the next radio station on the list.Long press: automatic search for a higher frequency.CD: selection of the next track. CD: continuous press: fast forward play. RADIO: change to the previous radio station on the List.Long press: automatic search for a lower frequency. CD: selection of the previous track.CD: continuous press: fast reverse. - Change the sound source. - Makeacall from theaddressbook. - Pick up/Hang up the telephone. - Pressfor more than 2 seconds:access to theaddressbook. Volume increase. Volumedecrease.Mute: function activatedby pressing the volumeincreaseanddecreasebuttons simultaneously. Restore the soundbypressing one of the two volumebuttons.
18203 GENERAL OPERATION For a detailed global view of the menus available, refer to the"Screen menu map" section. Press the MODE button several times in succession for access to the following menus: For cleaning the screen, the use of a soft, non-abrasive cloth (spectacles cloth) is recommended, with no additional product. RADIO/MUSIC MEDIAPLAYERSTELEPHONE(If a conversation is in progress)FULL SCREEN MAPNAVIGATION(If guidance is in progress)SETUP: system language * , date and time * , display, vehicle settings * , unit and system settings, "Demo mode".TRAFFIC:TMC information and messages. * Available according to model. TRIP COMPUTER
18303GENERAL OPERATION A press on the OK dial gives access to short-cut menus according to the displayon thescreen. DISPLAY ACCORDING TO THE CONTEXT NAVIGATION (IF GUIDANCE IS INPROGRESS): TRIP COMPUTER: Abort guidanceRepeat adviceBlock roadRoute infoShow destination Trip info Route type AvoidSatellitesZoom/Scroll Voice adviceRoute optionsAlert logStatus of functions12332111311112 TELEPHONE:End callHold callDialDTMF-TonesPrivate modeMicro off111111
18403 GENERAL OPERATION DISPLAY ACCORDING TO THE CONTEXT FULL SCREEN MAP: Abort guidance/Resume guidanceSet destinationPOIs nearbyPosition infoMap settingsZoom/Scroll111111RADIO:In FM modeTraffi c info (TA)RDSRadiotextRegional prog. In AM modeAMTARefresh AM list FM1212222222MUSIC MEDIA PLAYERS: Traffi c info (TA)Play optionsNormalorder Random track Repeat folder Select musicScan 1122221
18504123564 NAVIGATION - GUIDANCE SELECTING A DESTINATION Press the NAVbutton again or select the Navigation Menu function andpress the dial to confi rm. Select the "Destination input" function and press the dial toconfi rm. Press the NAV button. Select the letters of the town oneby one confi rming each time by pressing the dial. Once the country has been selected,turn thedial andselect the townfunction. Press thedial toconfi rm. Insert the SD card in the front panel reader and leave it there to use theNavigation functions. The navigation SD card data must not be modifi ed.Map data updates are available from PEUGEOT dealers. A pre-set list (by entering the fi rst few letters) of the towns in thecountry selected can be accessed via the LIST button on the virtualkeypad.Select the "Address input" function and press the dial to confi rm. The list of the last 20 destinations appears under the NavigationMenufunction.Navigation MenuDestination inputAddress input
18604789 To clear a destination; from steps 1 to 3, select "Choose from last destinations".A long press on one of the destinations displays a list of actions from which you can select: Delete entry Delete listRepeat steps 5 to 7 for the "Street" and "House number" functions. Turn the dial and select OK. Press thedial toconfi rm.Select the "Save toaddressbook" function to record theaddressentered in a directoryfi le. Press the dial to confi rm the selection.Peugeot Connect Navigation allows up to 500 contact fi les to berecorded. To speed up the process, the post code can be entered directlyafter selecting the "Postal code" function. Use the virtual keypad to enter the letters and digits. Then select "Start route guidance"and the press the dial to confi rm. Duringguidance, pressing the endof the lighting stalk repeats the last guidance instruction. Map settings You can zoom in/zoom out on the map using the dial. It is possible to move the map or select its orientation via the short-cut menu of the FULL SCREEN MAP. Press MODE until the map is displayed full screen. Press the dialthen select "Map settings". Select "2.5D Map" or "2D Map" and in the latter case, select "North Up" or "Heading Up".Select the route type: "Fast route", "Short route" or "Optimized route" and press the dialtoconfi rm. It is also possible to select a destination via "Choose from address book" or "Choose from last destinations".Choose from last destinationsChoose from address bookStart route guidanceNAVIGATION - GUIDANCE
1870412354 NAVIGATION - GUIDANCE SETTING AND NAVIGATING TO MY "HOME ADDRESS" Press the NAV button twice to display the Navigation Menu. To be set as the "Home address", an address must fi rst be entered in the address book, for example from "Destinationinput"/"Address input" then "Save to address book". Select "Address book" and confi rm. Then select "Search entry(complete address book)" and confi rm.Select "Destination input" and confi rm. Then select "Choose from addressbook" andconfi rm. Select "Set as home address" andconfi rm tosave. Select your home address and confi rm.Then select "Edit entry" and confi rm. To start navigation towards "Home address", press NAV twiceto display the Navigation Menu, select "Destination input" and confi rm. Then select "Navigate HOME" and confi rm to start guidance. Navigation MenuDestination inputAddress bookEdit entrySet as "Home address"
188044321765NAVIGATION - GUIDANCE ROUTE OPTIONS Select the "Route dynamics"function. This function gives access to the "Traffi c independent" or "Semi-dynamic" options. Select the "Avoidance criteria"function. This function providesaccess to the AVOID options (motorways, toll roads, ferries). Turn thedial andselect the"Recalculate" function to take intoaccount the route options selected. Press thedial toconfi rm. Press the NAV button. Press the NAV button again or select the Navigation Menu function andpress the dial to confi rm. Select the "Route type" functionand press the dial to confi rm. Thisfunction allows you to change theroute type. Select the "Route options" functionand press the dial to confi rm. RecalculateAvoidance criteriaRoute dynamicsRoute typeRoute optionsNavigation MenuThe route selected by the Peugeot Connect Navigation system depends directly on the route options. Changing these options may change the route completely.
189047654321 ADDING A STOPOVER Once the new address has been entered, select OK and press the dial toconfi rm.Select "Recalculate" and press thedial toconfi rm. Press the NAV button. Press the NAV button again or select the Navigation Menu function andpress the dial to confi rm. Select the "Add stopover" function(5 stopovers maximum) and pressthedial toconfi rm.Select the "Stopovers" function andpress the dial to confi rm. OKAddress inputAdd stopoverStopoversNavigation MenuRecalculate The stopover must be completed or deleted in order for theguidance to continue to the next destination. Otherwise, the Peugeot Connect Navigation will always return you to the previous stopover.Stopovers can be added to the route once the destination has been selected. NAVIGATION - GUIDANCE
1900486743521NAVIGATION - GUIDANCE SEARCHING FOR POINTS OF INTEREST (POI) Press the NAV button. Press the NAVbutton again or selectthe Navigation Menu function and press the dial to confi rm.Select the "POI nearby" function to search for POIs around the vehicle.Select the "POI search" function and press the dial to confi rm.Navigation MenuPOI searchPOI nearbySelect the "POI in city" function tosearch for POIs in the city required.Select the country then enter the name of the city using the virtual keypad. Select the "POI near route" functionto search for POIs near the route. Select the "POI in country" function to search for POIs in the countryrequired. Select the "POI near destination"function to search for POIs near thepoint of arrival of the route.POI near destinationPOI near routePOI in countryPOI in cityA list of cities present in the country selected can be accessed via the LIST button on the virtual keypad. The points of interest (POI) indicate all of the service locations in the vicinity(hotels, various businesses, airports...).
19104NAVIGATION - GUIDANCE LIST OF PRINCIPAL POINTS OF INTEREST (POI) * According to availability in the country. This icon appears when several POIs are grouped together in the same area. Zooming in on this iconshows details of the POIs.
19204563214 NAVIGATION SETTINGS Select "Set parameters for riskareas" for access to the "Displayon map", "Visual alert" and "Soundalert" functions.Select the "POI categories on Map"function to select the POIs to be displayed on the map by default. Press the NAV button.Press the NAV button again or select the Navigation Menu function andpress the dial to confi rm. Select the "Settings" function andpress the dial to confi rm.POI categories on MapSettingsSet parameters for risk areasNavigation MenuNAVIGATION - GUIDANCE Select the "Navi volume" function and turn thedial toset the volumeof each voice synthesiser (traffi cinformation, alert messages…).Navi volume The adjustment of the volume for the Risk Areas POIs is used onlyduring the transmission of an alert. UPDATING THE RISK AREAS POIs (Speed camera information) This requires an SDHC(High Capacity) compatible reader. Download the update fi le from the Internet (www.peugeot.fr orwww.peugeot.co.uk). Open this fi le and copy the extracted documents to the DATABASE folder on the SD card, replacing the existingfi les. To activate or deactivate vocal guidance, with guidance active and the map displayed on the screen, press the dial and then select or deselect "Voiceadvice". Voice advice
1930521345TRAFFIC INFORMATION CONFIGURE THE FILTERING AND DISPLAY OF TMC MESSAGES Then select the radiusof thefi lter in miles (km) required in accordance with the route, press the dial to confi rm. When all of the messages on the route are selected, the addition of ageographical fi lter is recommended(within a radius of 3 miles (5 km)for example) to reduce the number ofmessages displayed on the map.The geographical fi lter follows the movement of the vehicle. The fi lters are independent and their results are cumulative. We recommendafi lter on the routeandafi lter around the vehicleof: - 2 miles (3 km) or 3 miles (5 km)for a region with heavy traffi c, - 6 miles (10 km)for a region with normal traffi c, - 30 miles (50 km)for long journeys (motorway). Press the TRAFFIC button again or select the Traffic Menu function andpress the dial to confi rm. Press the TRAFFIC button. TMC(Traffi c Message Channel) messages contain information on traffi c and weather conditions, received in real time and transmitted tothe driver in the form of audible announcements and symbols on thenavigation map. The navigation system can then suggest an alternative route to avoid atraffi c problem. Select the "Geo. Filter" function and press the dial to confi rm.Messages on route The list of TMC messages appears under the Traffi c Menu sortedin order of proximity.All warning messagesTraffi c MenuSelect the fi lter of your choice: Only warnings on routeAll messagesThe messages appear on the map andon the list.To exit, press ESC. Geo. Filter
1940521321 PRINCIPAL TMC SYMBOLS With thecurrent audiosourcedisplayed on the screen, press thedial. The shortcut menu for the source appears and gives access to: Select Traffi c Announcements (TA)and press the dial to confi rm and go to the associated settings. TA - the station transmits TA messages. RECEIVING TA MESSAGES Red and yellow triangle: traffi c information, for example:Black and blue triangle: general information, for example:TRAFFIC INFORMATION The TA (Traffi c Announcement)function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffi c report is transmitted, the current audio source (Radio, CD, ...) is interrupted automatically to play the TA message. Normal playbackof theaudiosource resumesat theendof the transmission of themessage. - the station does not transmit TA messages. - TA messages are not activated.
195063211SELECTING A STATION When thecurrent radiostation isdisplayed on the screen, press thedial. The radio source short-cuts menu appears and provides access to the following short-cuts: Select the function required and press the dial to confi rm to gainaccess to the corresponding settings. TA RDS, if displayed, allows you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not beassured throughout the entire country as radio stations do notcover 100 % of the territory. This explains the loss of reception ofthe station during a journey. The external environment (hill, building, tunnel, underground car park...)may interfere with the reception, including in RDS following mode. This phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a failure of the audio equipment. RDS - REGIONAL MODE Press the RADIO button to displaythe list of stations received locally sorted in alphabetical order.Select the station required by turningthe dial and press to confi rm. Regional prog.RadiotextRDSWhile listening to the radio, press one of the buttons to select the previous or next station onthe list. Press one of the buttons on the numeric keypad for more than2 seconds tostore thecurrent station.Press the button on the numeric keypad to recall the stored radio station. AM A long press of one of the buttons starts theautomaticsearch for astation with a lower or higher frequency. RADIO
19607MUSIC MEDIA PLAYERS CD, MP3/WMA CD INFORMATION AND ADVICE In order to be able to play a recorded CDR or CDRW, when recording it is preferable to select the ISO 9660 level 1, 2 or Jolietstandard.If the disc is recorded in another format it may not be playedcorrectly.It is recommended that the same recording standard is alwaysused for an individual disc, with as low a speed as possible(4x maximum) for optimum sound quality. In the particular case of a multi-session CD, the Joliet standard is recommended. The Peugeot Connect Navigation will only play audio fi les with the extension ".mp3" with a speed of between 8 Kbps and 320 Kbps and the extension ".wma" with a speed of between 5 Kbps and384 Kbps. It also supports the VBR (Variable Bit Rate) mode. No other type offi le (.mp4, .m3u...) can be played.The MP3 format, an abbreviation of MPEG 1, 2 & 2.5 Audio Layer 3 and the WMA format, an abbreviation of Windows Media Audio and the property of Microsoft, are audio compression standards which permit the recording of several tens of music fi les on a single disc. It is advisable to restrict fi le names to 20 characters, without using special characters (e.g.: " ? ; ù) to avoid any play or displayproblems.
19707321645 SELECTING/PLAYING MUSIC CD, MP3/WMA CD The playing and displaying of an MP3/WMA compilation maydepend on the recording programme and/or the settings used. Werecommend the ISO9660fi lestandard.Press the MUSIC button.Select the "Select music" function and press the dial to confi rm. Press the up or down button to select the next/previous folder. Select the music source required:CD, MP3/WMA CD. Press the dial toconfi rm. Play begins.Select musicPress the MUSIC button again or select the Music Menu function andpress the dial to confi rm. Pressoneof thebuttons toselect amusic track. Pressand holdoneof thebuttons for fast forward or rewind play. Music MenuThe list of tracks or MP3/WMA fi les appears under Music Menu. MUSIC MEDIA PLAYERS
198074312 MUSIC MEDIA PLAYERSConnect the portable device (MP3/WMA player…) to the audio sockets (white and red, RCA type) using aJACK/RCA audio cable. Press the MUSIC button then press it again or select the Music Menu function and press the dial to confi rm. Select the AUX musicsourceandpress the dial to confi rm. Play beginsautomatically.Select the "External device" functionand press the dial to activate it. External device USING THE EXTERNAL INPUT (AUX) Music MenuAUDIO JACK-RCA CABLE NOT SUPPLIED The display and management of the controls is on the portable device.
199081234BLUETOOTH TELEPHONE * The services available depend on the network, the SIM card and thecompatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the servicesavailable to you. PAIRING A TELEPHONE FIRST CONNECTION For reasons of safety and because they require prolonged attentionon the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the Peugeot ConnectNavigation must be carried out with the vehicle stationary. Theignition must be on. Activate the telephone's Bluetooth functionand ensure that it is "visible to all" (refer to thetelephone instructions). Enter the authentication code on the telephone. The code to be entered is displayed on the screenof the system. Some telephones offer automatic reconnection ofthe telephone every time the ignition is switched on. A message confi rms the pairing. To change the telephone connected, press the PHONE button, then select Phone Menu and press the dial toconfi rm.Once the telephone has been connected, Peugeot Connect Navigation can synchronise the address book and the call list. Thissynchronisation may take a few minutes * . Pairing can also be started from the telephone (refer to thetelephone instructions).Visit www.peugeot.co.uk for more information (compatibility, morehelp, ...). Press the PHONE button. For a fi rst connection, select"Search phone" and press the dial to confi rm. Then select the nameof thetelephone.Search phone
200081221* The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you. BLUETOOTH TELEPHONE CONNECTING A TELEPHONE For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetoothmobile telephone to the hands-free system of the Peugeot Connect Navigation must be carried out with the vehicle stationary. The ignition must be on. Activate the telephone's Bluetooth function. The last telephone connected is reconnected automatically. A message confi rms the connection. When a telephone is alreadyconnected, to change it press the PHONE button, then select PhoneMenu and press the dial to confi rm.Once the telephone has been connected, Peugeot Connect Navigation can synchronise the address book and the calllist. This synchronisation may take a few minutes * . The list of telephones connected previously(4 maximum) appearson the multifunction screen. Select the telephone required for anew connection.Visit www.peugeot.co.uk for more information (compatibility, more help, ...). Press the PHONE button.Select "Connect phone". Select the telephone and press to confi rm.Connect phone
2010813221Select the "Yes" tab to accept or "No"to refuse and confi rm by pressingthedial. RECEIVING A CALL MAKING A CALL An incoming callis announcedby a ring and a superimposeddisplay on the multifunction screen.YesTo hang up, press the PHONE buttonor press the dial and select "End call"then confi rm by pressing the dial.End callPress the PHONE button. Select "Dial number", then dial the telephone number using the virtualkeypad.Select the Phone Menu function and press the dial to confi rm. The list of the last 20 calls made and received in the vehicle appears under Phone Menu. You can select a number and pressthedial to make thecall. No It is also possible to select a number from the address book. You can select "Dial from address book". The Peugeot ConnectNavigation can record up to 1 000 entries (telephone numbers). Press the end of the steering mounted control for more than twoseconds to gain access to the address book. Phone MenuDial number It is possible to make a call directly from the telephone; park the vehicle as a safety measure. BLUETOOTH TELEPHONE Press the end of the steering mounted control to accept the call or end the call in progress.To delete a number, press the PHONE button then press and hold on a call number to display a list of actions including:Delete entryDeletelist
20209432165CONFIGURATION SETTING THE DATE AND TIME The SETUP function gives access to the following options: Systemlanguage, Date & Time, Display (Brightness, Colour, Map colour), Vehicle,Units, System.Adjust the settings one by one usingthe direction arrows and confi rm bymeansof thedial.Select the "Dateformat" function andpress the dial to confi rm.Select the "Set date & time" function and press the dial to confi rm.Confi rm the format required using the dial. Pressing the SETUP button for more than 2 seconds gives access to:These settings must be entered again if the battery has been disconnected. Press theSETUP button. Confi rm the format required usingthedial.Select the "Timeformat" function andpress the dial to confi rm.Set date & timeSelect the "Date & Time" functionand press the dial to confi rm.Demo modeGPS coverageDescription of the unitDate & Time
203101TRIP COMPUTER TRIP COMPUTER Press the MODE button several times in succession until the tripcomputer is displayed. Range: displays the distance which can travelled with the remaining fuel detected in the tank, based on the average fuelconsumption over the last few miles (kilometres).This displayed value may vary signifi cantly following a change in the vehicle speed or the relief of the route. When the range falls below 20 miles (30 km), dashes aredisplayed. After fi lling with at least 5 litres offuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km). If, whilst driving, dashes are displayed continuously in place of thedigits, contact a PEUGEOT dealer. Each press of the button at the end of the wiper stalk displays the different trip computer information in succession, according to thescreen. A FEW DEFINITIONS - The "vehicle" tab: The range, the current fuel consumption and the distance remaining. - The "1" (trip 1) tab with: The average speed, the average fuel consumption and thedistance travelledcalculatedover route "1". - The "2" (trip 2) tab with the samefunctions for asecond route.Current fuel consumption:only calculated anddisplayed above20 mph (30 km/h).Average fuel consumption: this is the average fuel consumption since the last trip computer zero reset. Distance travelled: calculated since the last trip computer zero reset. Distance remaining to the destination:calculated with referenceto the fi nal destination, entered by the user. If guidance is activated,the navigation system calculates it as a current value.Average speed:this is the average speed calculated since the lasttrip computer zero reset (ignition on).
20411RADIO SCREEN MENU MAP "Traffic" Menu Messages on routeOnly warnings on routeAll warning messages All messagesWithin2 miles (3 km)Geo. Filter Within3 miles (5 km)Within6 miles (10 km)Within30 miles (50 km)Within 60 miles (100 km) "Music" Menu Select music Sound settings Balance/FaderBass/TrebleLinear EqualizerClassicJazz Rock/Pop TechnoVocalLoudnessSpeed dependent volumeReset sound settings "Radio" Menu WavebandAMLinearFMManual tuneSound settingsBalance/FaderBass/TrebleEqualizer MAIN FUNCTION OPTION Aoption A1option A2OPTION B... 12312412343333222244444333332322333312323
205Abort guidance/Resume guidanceDestination input Geo position MapStopovers Add stopover Navigate HOMEChoose from address book Rearrange routeChoose from last destinations Replace stopoverDelete stopoverRecalculateFast routeShort routeOptimized route POI search POI nearby Route options Route typeShort routeFast route "Navigation" Menu CityStreetEnter new addressCountryNavigate HOME City districtHouse number Start route guidance Postal codeSave to address book Intersection Address input POI near destinationPOI in cityPOI in countryPOI near routeChoose from address book33Choose from last destinationsTMC station informationLoudnessSpeed dependent volumeReset sound settings3331244444444444323323444433334442423333334ClassicJazzRock/PopTechnoVocal44444
206 Avoid ferriesRecalculate Settings Navi volumePOI categories on MapSet parameters for risk areas Display on map Visual alertSound alert 324333444 Dial from address book "Phone" Menu Search phone Call lists Connect phone Select ring tonePhone/Ring tone volumePhones connectedEnter mailbox number Settings Disconnect phoneRename phoneDelete pairingDelete all pairingsShow details "SETUP" menu System language * EnglishEspañolDeutschItalianoFrançaisNederlandsPolskiPortugueseDate & Time * Set date & timeDate formatTime format122223344444233312333333333332 Avoid motorwaysRoute dynamics Traffi c independent Semi-dynamicAvoidance criteria Avoid toll roadsOptimized route 3344444* Available according to model.
207* Available according to model.Dark blueMap colourNight mode for map UnitsDay mode for map Vehicle *Vehicle informationAlert logStatusoffunctionsTemperatureCelsius Fahrenheit Metric/Imperial Kilometres (Consumption: l/100) Kilometres (Consumption: km/l) Miles (Consumption: MPG) SystemAuto. Day/Night for map Factory resetSoftware versionAutomatic scrolling344243442344344424333ColourPop titaniumToffeeBluesteelTechnogrey34444DisplayBrightness23
208 FREQUENTLY ASKED QUESTIONSQUESTIONANSWERSOLUTION There isadifference in sound quality betweenthedifferent audiosources (radio, CD...). For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambience, Loudness) can be adapted to the different sound sources,which may result in audible differences when changing source (radio,CD...).Check that the audio settings (Volume, Bass, Treble, Ambience, Loudness) are adapted tothesources listened to. It isadvisable tosetthe AUDIO functions (Bass, Treble, Front-Rear Balance, Left-Right Balance) to the middle position, select the Linear musical ambience andset the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode. The CD is ejected automatically or is not played by the player. The CD is inserted upside down, is unplayable, does not contain anyaudio data or contains an audio format which the player cannot play. The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment. - Check that the CD is inserted in the player the right way up. - Check the condition of the CD: the CD cannot be played if it is too damaged. - Check the content in the case of a recordedCD: consult the advice in the Audio section. - The audio equipment's CD player does notplayDVDs. - Because of their quality level, certain writeableCDs will not be played by the audio system. Insert good qualityCDs and store them insuitableconditions.The CD player sound is poor. The CD used is scratched or of poor quality. The audio equipment settings (bass, treble, ambiences) are unsuitable. Set the treble or bass level to 0, without selectingan ambience.
209QUESTIONANSWERSOLUTIONThestoredstationsdonot function (no sound, 87.5 Mhz is displayed...). An incorrect wavebandisselected. Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which thestationsarestored. The quality of receptionof the radiostation listened to graduallydeterioratesor thestoredstationsdo not function(no sound, 87.5 Mhz is displayed...). The vehicle is too far from the transmitter used by the station listenedto or there is no transmitter in the geographical area through which the vehicle is travelling. Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.This phenomenon is normal anddoes not indicate a failure of the audio equipment.The aerial is absent or has been damaged (for example when goingthrough a car wash or into an underground car park). Have the aerial checked by a PEUGEOT dealer. Soundcut-outsof 1 to2seconds in radio mode.During this brief sound cut-out, the RDS searches for anyfrequencypermitting better reception of the station. Deactivate the RDSfunction if the phenomenon is too frequent and always on the same route. With the engine off, the audio equipment switchesoffafter afew minutesofuse. When the engine is switched off, the audio equipment operating timedepends on the battery charge. The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery. Start the vehicle's engine to increase the batterycharge.
210QUESTIONANSWERSOLUTION Wait until the trafficinformation is beingreceived correctly(displaying of the traffi cinformation symbols on the map). TA is selected. However, certain traffi c jams along the route are notindicated in real time.On starting, it is several minutes before the system begins to receive the traffi c information. In certain countries, only major routes (motorways...) are listed for thetraffic information.This phenomenon is normal. The system isdependent on the traffi c information available. I receive a speed camera alert for acamera whichis not on my route.The system announces all speed cameras located in a conical zoneforward of the vehicle. It may detect speed cameras on nearby or parallel roads. Zoom the map to view the exact position of thespeed camera. The audible speedcameraalert is not working.Audiblealertsare not active. Activate audible alerts in Navigation Menu, Settings, Set parameters for risk areas. Thealert volume level isset to minimum. Increase the speed camera alert volume.Thealtitudeis not displayed. On starting, the initialisation of the GPS may take up to 3 minutes toreceive more than 3 satellites correctly.Wait until the system has started up completely. Check that there is a GPS coverage of at least3 satellites (long press on the SETUP button, then select GPS coverage). Depending on the geographical environment (tunnel...) or the weather, the conditions of reception of the GPS signal may vary. This phenomenon is normal. The system isdependent on the conditions of reception of the GPS signal. The routeis notcalculated successfully.The exclusion criteria may confl ict with the current location (exclusion oftoll roads on a motorway with tolls). Check the exclusion criteria.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131