Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Visibility Lighting controls

81 LIGHTING CONTROLS System for selection and control of the various front and rear lights providing the vehicle’s lighting. Manual controls The lighting commands are made directly by the driver by means of ring A and lever B . lights off, side lights only, dipped or main beam headlamps, B. lever for inversion of the lights by pulling: dipped headlamps/main beam headlamps. In the lights off and side lights modes, the driver can switch on the main beam headlamps directly ("headlamp fl ash") for as long as he pulls the lever. Displays The corresponding indicator light comes on on the instrument panel to confi rm the selective switching on of the lighting selected. Main lighting The vehicle’s various front and rear lights are designed to adapt the driver’s visi-bility gradually in relation to the climatic conditions: - side lights, to be seen, - dipped headlamps to see without dazzling other drivers, - main beam headlamps for good visibility when the road is clear. Additional lighting Other lights are installed to respond to particular driving conditions: - rear fog lamps to be seen from a distance, - front fog lamps for even better visibility, - directional headlamps for improved visibility around bends. Programmes Various automatic lighting control modes are also available according to the following options: - "follow-me-home" lighting, - automatic lighting, - static directional lighting. A. main lighting mode selection ring, with: Model without AUTO lighting Model with AUTO lighting automatic lighting.
!i82 Model with rear fog lamps only Model with front and rear fog lamps front and rear fog lamps rear fog lamps C. fog lamps selection ring. These operate with the dipped and main beam headlamps. To switch on the fog lamps, turn push ring C forwards. When the lights are switched off auto-matically (on AUTO model), the fog lamps and the dipped headlamps will remain on. To switch off all of the lights, turn push ring C rearwards. To switch on the fog lamps, turn push ring C forwards. To switch off the rear fog lamps, turn push ring C rearwards twice in suc-cession. When the lights are switched off auto-matically (on AUTO model) or when the dipped headlamps are switched off manually, the fog lamps and the side lights will remain on. Turn the ring rearwards to switch off the fog lamps, the side lights will then switch off. In good weather or in rain, both day and night, the front fog lamps and the rear fog lamps are prohibited. In these situations, the power of their beams may dazzle other drivers. Do not forget to switch off the front fog lamps and the rear fog lamps when they are no longer necessary. Lights on reminder The triggering of an audible signal when a front door is opened warns the driver that he has forgotten to switch off his vehicle’s lights, with the ignition off. In this case, switching off the lights will stop the audible signal. When the ignition is switched off, if the dipped headlamps remain on, they will be switched off automatically after thirty minutes to prevent discharging of the battery.
!83 In fog or snow, the brightness sensor may detect suffi cient light. Therefore, the lights will not come on automatically. Do not cover the brightness sensor, coupled with the rain sensor and located in the centre of the wind-screen behind the interior mirror; the associated functions would no longer be controlled. Coupling with the "Follow-me-home" lighting Association with the automatic lighting provides the "follow-me-home" lighting with the following additional options: - selection of the duration of main-taining of the lighting for 15, 30 or 60 seconds in the vehicle param-eters on the multifunction display confi guration menu, - automatic activation of "follow-me-home" lighting when automatic lighting is in operation. Automatic lighting The side lights and dipped headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected (sensor behind the interior mirror) or when the windscreen wipers are switched on. As soon as the brightness returns to a suffi cient level or the windscreen wipers are switched off, the lights are switched off automatically. "Follow-me-home" lighting The dipped headlamps remain on tem-porarily, after switching off the vehicle’s ignition, to make the driver’s exit easier in poor light. Activation With the ignition off, activate a "headlamp fl ash" using lever B . A second "headlamp fl ash" switches the function off again. Switching off The "follow-me-home" lighting is switched off automatically following the door locking command, after a given time. Activation Turn ring A to the "AUTO" position. The automatic lighting is accompanied by a message on the multifunction dis-play. Operating fault In the event of a malfunction of the brightness sensor, the lights come on accompanied by the service warning light, an audible signal and a message on the multifunction display. Have it checked by a PEUGEOT dealer. Daytime lights * On vehicles fi tted with daytime lights, the dipped headlamps come on when the vehicle is started. This indicator light comes on on the instrument panel. The instruments and controls (instru-ment panel, multifunction display, air conditioning control panel, ...) are not lit, unless the automatic switching on of the lights mode is activated or the lights are switched on manually. Deactivation Turn ring A to a position other than " AUTO ". Deactivation is accompanied by a message on the multifunction dis-play. * According to country.
!83 In fog or snow, the brightness sensor may detect suffi cient light. Therefore, the lights will not come on automatically. Do not cover the brightness sensor, coupled with the rain sensor and located in the centre of the wind-screen behind the interior mirror; the associated functions would no longer be controlled. Coupling with the "Follow-me-home" lighting Association with the automatic lighting provides the "follow-me-home" lighting with the following additional options: - selection of the duration of main-taining of the lighting for 15, 30 or 60 seconds in the vehicle param-eters on the multifunction display confi guration menu, - automatic activation of "follow-me-home" lighting when automatic lighting is in operation. Automatic lighting The side lights and dipped headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected (sensor behind the interior mirror) or when the windscreen wipers are switched on. As soon as the brightness returns to a suffi cient level or the windscreen wipers are switched off, the lights are switched off automatically. "Follow-me-home" lighting The dipped headlamps remain on tem-porarily, after switching off the vehicle’s ignition, to make the driver’s exit easier in poor light. Activation With the ignition off, activate a "headlamp fl ash" using lever B . A second "headlamp fl ash" switches the function off again. Switching off The "follow-me-home" lighting is switched off automatically following the door locking command, after a given time. Activation Turn ring A to the "AUTO" position. The automatic lighting is accompanied by a message on the multifunction dis-play. Operating fault In the event of a malfunction of the brightness sensor, the lights come on accompanied by the service warning light, an audible signal and a message on the multifunction display. Have it checked by a PEUGEOT dealer. Daytime lights * On vehicles fi tted with daytime lights, the dipped headlamps come on when the vehicle is started. This indicator light comes on on the instrument panel. The instruments and controls (instru-ment panel, multifunction display, air conditioning control panel, ...) are not lit, unless the automatic switching on of the lights mode is activated or the lights are switched on manually. Deactivation Turn ring A to a position other than " AUTO ". Deactivation is accompanied by a message on the multifunction dis-play. * According to country.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131