Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Visibility

81 LIGHTING CONTROLS System for selection and control of the various front and rear lights providing the vehicle’s lighting. Manual controls The lighting commands are made directly by the driver by means of ring A and lever B . lights off, side lights only, dipped or main beam headlamps, B. lever for inversion of the lights by pulling: dipped headlamps/main beam headlamps. In the lights off and side lights modes, the driver can switch on the main beam headlamps directly ("headlamp fl ash") for as long as he pulls the lever. Displays The corresponding indicator light comes on on the instrument panel to confi rm the selective switching on of the lighting selected. Main lighting The vehicle’s various front and rear lights are designed to adapt the driver’s visi-bility gradually in relation to the climatic conditions: - side lights, to be seen, - dipped headlamps to see without dazzling other drivers, - main beam headlamps for good visibility when the road is clear. Additional lighting Other lights are installed to respond to particular driving conditions: - rear fog lamps to be seen from a distance, - front fog lamps for even better visibility, - directional headlamps for improved visibility around bends. Programmes Various automatic lighting control modes are also available according to the following options: - "follow-me-home" lighting, - automatic lighting, - static directional lighting. A. main lighting mode selection ring, with: Model without AUTO lighting Model with AUTO lighting automatic lighting.
!i82 Model with rear fog lamps only Model with front and rear fog lamps front and rear fog lamps rear fog lamps C. fog lamps selection ring. These operate with the dipped and main beam headlamps. To switch on the fog lamps, turn push ring C forwards. When the lights are switched off auto-matically (on AUTO model), the fog lamps and the dipped headlamps will remain on. To switch off all of the lights, turn push ring C rearwards. To switch on the fog lamps, turn push ring C forwards. To switch off the rear fog lamps, turn push ring C rearwards twice in suc-cession. When the lights are switched off auto-matically (on AUTO model) or when the dipped headlamps are switched off manually, the fog lamps and the side lights will remain on. Turn the ring rearwards to switch off the fog lamps, the side lights will then switch off. In good weather or in rain, both day and night, the front fog lamps and the rear fog lamps are prohibited. In these situations, the power of their beams may dazzle other drivers. Do not forget to switch off the front fog lamps and the rear fog lamps when they are no longer necessary. Lights on reminder The triggering of an audible signal when a front door is opened warns the driver that he has forgotten to switch off his vehicle’s lights, with the ignition off. In this case, switching off the lights will stop the audible signal. When the ignition is switched off, if the dipped headlamps remain on, they will be switched off automatically after thirty minutes to prevent discharging of the battery.
!83 In fog or snow, the brightness sensor may detect suffi cient light. Therefore, the lights will not come on automatically. Do not cover the brightness sensor, coupled with the rain sensor and located in the centre of the wind-screen behind the interior mirror; the associated functions would no longer be controlled. Coupling with the "Follow-me-home" lighting Association with the automatic lighting provides the "follow-me-home" lighting with the following additional options: - selection of the duration of main-taining of the lighting for 15, 30 or 60 seconds in the vehicle param-eters on the multifunction display confi guration menu, - automatic activation of "follow-me-home" lighting when automatic lighting is in operation. Automatic lighting The side lights and dipped headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected (sensor behind the interior mirror) or when the windscreen wipers are switched on. As soon as the brightness returns to a suffi cient level or the windscreen wipers are switched off, the lights are switched off automatically. "Follow-me-home" lighting The dipped headlamps remain on tem-porarily, after switching off the vehicle’s ignition, to make the driver’s exit easier in poor light. Activation With the ignition off, activate a "headlamp fl ash" using lever B . A second "headlamp fl ash" switches the function off again. Switching off The "follow-me-home" lighting is switched off automatically following the door locking command, after a given time. Activation Turn ring A to the "AUTO" position. The automatic lighting is accompanied by a message on the multifunction dis-play. Operating fault In the event of a malfunction of the brightness sensor, the lights come on accompanied by the service warning light, an audible signal and a message on the multifunction display. Have it checked by a PEUGEOT dealer. Daytime lights * On vehicles fi tted with daytime lights, the dipped headlamps come on when the vehicle is started. This indicator light comes on on the instrument panel. The instruments and controls (instru-ment panel, multifunction display, air conditioning control panel, ...) are not lit, unless the automatic switching on of the lights mode is activated or the lights are switched on manually. Deactivation Turn ring A to a position other than " AUTO ". Deactivation is accompanied by a message on the multifunction dis-play. * According to country.
!83 In fog or snow, the brightness sensor may detect suffi cient light. Therefore, the lights will not come on automatically. Do not cover the brightness sensor, coupled with the rain sensor and located in the centre of the wind-screen behind the interior mirror; the associated functions would no longer be controlled. Coupling with the "Follow-me-home" lighting Association with the automatic lighting provides the "follow-me-home" lighting with the following additional options: - selection of the duration of main-taining of the lighting for 15, 30 or 60 seconds in the vehicle param-eters on the multifunction display confi guration menu, - automatic activation of "follow-me-home" lighting when automatic lighting is in operation. Automatic lighting The side lights and dipped headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected (sensor behind the interior mirror) or when the windscreen wipers are switched on. As soon as the brightness returns to a suffi cient level or the windscreen wipers are switched off, the lights are switched off automatically. "Follow-me-home" lighting The dipped headlamps remain on tem-porarily, after switching off the vehicle’s ignition, to make the driver’s exit easier in poor light. Activation With the ignition off, activate a "headlamp fl ash" using lever B . A second "headlamp fl ash" switches the function off again. Switching off The "follow-me-home" lighting is switched off automatically following the door locking command, after a given time. Activation Turn ring A to the "AUTO" position. The automatic lighting is accompanied by a message on the multifunction dis-play. Operating fault In the event of a malfunction of the brightness sensor, the lights come on accompanied by the service warning light, an audible signal and a message on the multifunction display. Have it checked by a PEUGEOT dealer. Daytime lights * On vehicles fi tted with daytime lights, the dipped headlamps come on when the vehicle is started. This indicator light comes on on the instrument panel. The instruments and controls (instru-ment panel, multifunction display, air conditioning control panel, ...) are not lit, unless the automatic switching on of the lights mode is activated or the lights are switched on manually. Deactivation Turn ring A to a position other than " AUTO ". Deactivation is accompanied by a message on the multifunction dis-play. * According to country.
i84 STATIC DIRECTIONAL LIGHTING When the dipped or main beam head-lamps are on, this function enables the beam to light the inside of the turn with an additional angle of approximately 30°. The use of this lighting is optimum above all at low and average speed (city driving, winding roads, ...). with directional lighting Programming Switching on The system is switched on from a certain speed and a certain angle of rotation of the steering wheel. Operating fault The function is activated or deactivated via the multi-function display confi gura-tion menu. By default, this function is activated. In the event of a malfunction, this warning light fl ashes on the instrument panel, accom-panied by a message on the multifunction display. Have it checked by a PEUGEOT dealer. Switching off The system is switched off below a certain angle of rotation of the steering wheel. It is switched off when reverse gear is engaged. HEADLAMP ADJUSTMENT The initial setting is position "0" . To avoid causing a nuisance to other road users, the height of the headlamps should be adjusted in relation to the load in the vehicle. 0 . 1 or 2 people in the front seats. -. 3 people. 1. 5 people. 2.5 people + maximum authorised load. 3. Driver + maximum authorised load. without directional lighting
85 WIPER CONTROLS System for the selection and control of the various front and rear wiping modes permitting the dispersal of rain and cleaning. The vehicle’s various front and rear wipers are designed to gradually im-prove the driver’s visibility in relation to the weather conditions. Manual controls The wiping commands are made directly by the driver using lever A and ring B . Model with intermittent wiping Model with AUTO wiping fast (heavy rain), normal (moderate rain), intermittent (in proportion to the speed of the vehicle), automatic (refer to the following page). off, single wipe (press downwards), Programmes Various automatic wiping control modes are also available depending on the following options: - automatic windscreen wiping, - rear wiping on engaging reverse gear. Windscreen wipers A. wiping speed selection lever:
!i86 Windscreen and headlamp wash A. rear wiper selection ring: off, intermittent wipe, wiping with screenwash (fi xed duration). Reverse gear When reverse gear is engaged, if the windscreen wipers are operating, the rear wiper will start. Programming Pull the windscreen wiper stalk to-wards you. The windscreen wash then the windscreen wipers operate for a fi xed period. The headlamp wash is also activated, if the dipped headlamps are on . Rear wiper In the presence of snow or consider-able frost and when using a tailgate bicycle carrier, deactivate the auto-matic rear wiper via the multifunction display confi guration menu. The function is activated or switched off via the multi-function display confi guration menu. By default, this function is activated. On vehicles fi tted with automatic air conditioning, any action on the windscreen wash control results in temporary closing of the air intake to avoid odour inside the passenger compartment.
!i87 Special position of the windscreen wipers Automatic windscreen wiping The windscreen wipers operate auto-matically, without any action on the part of the driver, if rain is detected (sensor behind the interior mirror), adapting their speed to the intensity of the rainfall. Activation This is controlled manually by the driver by pushing the stalk A to the "AUTO"position. It is accompanied by a message on the multifunction display. In the minute following switching off of the ignition, any action on the stalk positions the wipers in the centre of the windscreen. This action enables you to position the wiper blades for winter parking. To park the wipers after this has been done, switch on the ignition and operate the stalk. Do not cover the rain sensor, coupled with the brightness sensor and lo-cated in the centre of the windscreen behind the interior mirror. Switch off the ignition when using an automatic car wash. In winter, it is advisable to wait until the windscreen is completely clear of ice before activating the auto-matic wiping. The automatic wiping must be reactivated if the ignition has been off for more than one minute, by pushing the stalk A downwards. Switching off This is controlled manually by the driver by moving the stalk A to another position and returning it to position "0" . It is accompanied by a message on the multifunction display. Operating fault If an automatic wiping malfunction occurs, the wipers will operate in intermittent mode. Have it checked by a PEUGEOT dealer.
i88 COURTESY LIGHTS Selection and control of the various passenger compartment lights. 1.Front courtesy light2.Map reading lights3.Rear courtesy light Front and rear courtesy lights In this position, the courtesy light comes on gradually: Map reading lights With the ignition on, press the cor-responding switch. In permanent lighting mode, different lighting times are available: - with the ignition off, approxi-mately ten minutes, - in energy economy mode, approxi-mately thirty seconds, - with the engine running, unlimited. - when the vehicle is unlocked, - when the key is removed from the ignition, - when the remote control locking button is activated, in order to locate your vehicle. Permanently off. Permanent lighting. It switches off gradually: - when the vehicle is locked, - when the ignition is switched on, - 30 seconds after the last door is closed.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131