Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Practical Information Changing a bulb

!ii136 CHANGING A BULB Procedure for the replacement of a faulty bulb with a new bulb without the use of tools. 1.Direction indicators (PY 21 W amber).2.Side lights (W 5 W).3.Dipped headlamps (H7 - 55 W).4.Main beam headlamps (H1 - 55 W).5.Directional headlamps (H7 - 55 W).6.Fog lamps (H11 - 55 W). Changing the direction indicators Handle the bulbs with a dry cloth. The headlamps are fi tted with poly-carbonate glass with a protective coating: do not clean them using a dry or abrasive cloth, or using a detergent or solvent product, use a sponge and soapy water. In certain climatic conditions (low temperature, humidity), conden-sation on the internal surface of the headlamp glass is normal ; it disappears a few minutes after the lights are switched on . Model with dipped headlamps with elliptical module and directional headlamps Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifi cation and colour. Turn the bulb holder one quarter of a turn and remove it. Pull the bulb then change it. To refi t, carry out these operations in re-verse order. Front lights Blown bulb A message appears on the multifunc-tion display to indicate the bulb to be changed. Refer to the appropriate procedure to change the corresponding bulb. Model with conventional lights
137 Changing the side lights Disconnect the main headlamp con-nector. Remove the plastic protective cover by pulling on the tab. Turn the bulb holder one quarter of a turn and remove it. Pull the bulb and change it. To refi t, carry out these operations in reverse order. Changing the dipped headlamps, main beam headlamps or directional headlamps Disconnect the main headlamp con-nector. Remove the corresponding plastic protective cover by pulling on the tab. Changing the integrated direction indicator side repeaters Insert a screwdriver towards the centre of the repeater between the repeater and the base of the mirror. Tilt the screwdriver to extract the repeater and remove the repeater. Disconnect the repeater connector. To refi t, carry out these operations in reverse order. To obtain a replacement repeater, contact a PEUGEOT dealer. Disconnect the connector of the cor-responding light. Move aside the spring to release the bulb and remove the bulb. To refi t, carry out these operations in reverse order. Changing the fog lamps For replacement of these bulbs, contact a PEUGEOT dealer.
ii138 REAR LIGHTS (SALOON) 1.Brake lights (P21 W).2.Side lights (R5 W).3.Fog lamps (P21 W).4.Direction indicators (PY 21 W amber).5.Reversing lights (P21 W). Changing bulbs These fi ve bulbs are changed from out-side the boot: remove the light fi xing bolt, take out the light from the outside, disconnect the light connector, remove the light seal, press the four tabs and remove the bulb holder, turn the bulb one quarter of a turn and change it. If the vehicle is fi tted with the JBL audio system, on the right-hand side, open the fl ap fi rst to gain ac-cess to the fi xing bolt. Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifi cation and colour. To refi t, carry out these operations in reverse order.
!139 Changing the third brake light bulbs (4 bulbs W 5 W) Press on the fi xing pins on each side of the light. Take out the light from the outside. Turn the bulb holder which corre-sponds to the faulty bulb one quarter of a turn and remove it. Pull the bulb and change it. Changing the number plate light bulbs (W 5 W) Insert a thin screwdriver in one of the exterior holes of the lens. Push it towards the outside to unclip it. Remove the lens. Pull the bulb and change it. To refi t, carry out these operations in reverse order. High pressure washing When using this type of washing on stubborn dirt, do not persist on the headlamps, the lights and their surrounds to avoid damaging their varnish and their seal.
i140 Rear lights (SW) 1.Brake lights (P21 W).2.Side lights (R5 W).3.Direction indicators (PY 21 W amber).4.Fog lamps (P21 W).5.Reversing lights (P21 W). Changing bulbs These fi ve bulbs are changed from out-side the boot: remove the access fl ap, disconnect the light connector, remove the light fi xing bolt, take out the light from the outside, press on the four tabs and remove the bulb holder, turn the bulb a quarter of a turn and change it. To refi t, carry out these operations in reverse order. Take care to engage the light in its guides keeping it in the centreline of the vehicle. Tighten the fi xing bolt suffi ciently by hand to guarantee the sealing of the light. Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifi cation and colour.
!141 Changing the third brake light bulbs (4 bulbs W 5 W) Remove the two light fi xing nuts. Take out the light from the outside. Press on the two tabs and remove the bulb holder Pull the bulb and change it. To refi t, carry out these operations in reverse order. Tighten the fi xing bolt suffi ciently by hand to guarantee the sealing of the light. Changing the number plate bulbs (W 5 W) Insert a thin screwdriver into one of the exterior holes of the lens. Push it towards the outside to unclip it Remove the lens. Pull the bulb and change it. High pressure washing When using this type of washing on stubborn dirt, do not persist on the headlamps, the lights and their surrounds to avoid damaging their varnish and their seal.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131