Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Practical Information Battery

147 BATTERY Procedure for charging your battery when it is fl at or for starting the engine using another battery. Access to the battery Starting using another battery Connect the red cable to the posi-tive terminal (+) of the fl at battery A , then to the positive terminal (+) of the slave battery B . Connect one end of the green or black cable to the negative terminal (-) of the slave battery B . Connect the other end of the green or black cable to an earth point C on the broken down vehicle, as far as possible from the battery (for exam-ple, right-hand engine mounting). Operate the starter, let the engine run. Wait until the engine returns to idle and disconnect the cables. The battery is located under the bonnet on the left. To gain access to it: open the bonnet using the interior lever, then the exterior lever, secure the bonnet strut, remove the plastic cover to gain access to the two terminals.
!!i148 Do not disconnect the terminals while the engine is running. Do not charge the batteries without disconnecting the terminals fi rst. Do not push the vehicle to start the engine if it is fi tted with a "2 Tronic" gearbox. The batteries contain harmful sub-stances such as sulphuric acid and lead. They must be disposed of in accordance with regulations and must not, in any circumstances, be discarded with household waste. Take used remote control batteries and vehicle batteries to a special collection point. Charging the battery using a battery charger Disconnect the battery from the ve-hicle. Follow the instructions for use pro-vided by the manufacturer of the charger. Reconnect starting with the nega-tive terminal (-). Check that the terminals and connec-tors are clean. If they are covered with sulphate (whitish or greenish deposit), remove them and clean them. At the risk of discharging the bat-tery, the deactivated functions can be reactivated manually. LOAD REDUCTION MODE System which manages the use of cer-tain functions in relation to the level of charge remaining in the battery. When the vehicle is being driven, the load reduction function temporarily deac-tivates certain functions, such as the air conditioning, the rear screen de-icing... The deactivated functions are reactivat-ed automatically as soon as conditions permit. It is advisable to disconnect the battery if the vehicle is to be left un-used for more than one month. Before disconnecting the battery Wait 2 minutes after switching off the ignition before disconnecting the battery. Close the windows, the sunroof and the doors before disconnecting the battery. Following reconnection of the battery Following reconnection of the bat-tery, switch on the ignition and wait 1 minute before starting to permit in-itialisation of the electronic systems. However, if slight diffi culties are en-countered following this operation, contact a PEUGEOT dealer. Referring to the corresponding sec-tion, you must yourself reinitialise: - the remote control key, - the one-touch electric windows, - the sunroof, - the GPS satellite navigation system.
!!i148 Do not disconnect the terminals while the engine is running. Do not charge the batteries without disconnecting the terminals fi rst. Do not push the vehicle to start the engine if it is fi tted with a "2 Tronic" gearbox. The batteries contain harmful sub-stances such as sulphuric acid and lead. They must be disposed of in accordance with regulations and must not, in any circumstances, be discarded with household waste. Take used remote control batteries and vehicle batteries to a special collection point. Charging the battery using a battery charger Disconnect the battery from the ve-hicle. Follow the instructions for use pro-vided by the manufacturer of the charger. Reconnect starting with the nega-tive terminal (-). Check that the terminals and connec-tors are clean. If they are covered with sulphate (whitish or greenish deposit), remove them and clean them. At the risk of discharging the bat-tery, the deactivated functions can be reactivated manually. LOAD REDUCTION MODE System which manages the use of cer-tain functions in relation to the level of charge remaining in the battery. When the vehicle is being driven, the load reduction function temporarily deac-tivates certain functions, such as the air conditioning, the rear screen de-icing... The deactivated functions are reactivat-ed automatically as soon as conditions permit. It is advisable to disconnect the battery if the vehicle is to be left un-used for more than one month. Before disconnecting the battery Wait 2 minutes after switching off the ignition before disconnecting the battery. Close the windows, the sunroof and the doors before disconnecting the battery. Following reconnection of the battery Following reconnection of the bat-tery, switch on the ignition and wait 1 minute before starting to permit in-itialisation of the electronic systems. However, if slight diffi culties are en-countered following this operation, contact a PEUGEOT dealer. Referring to the corresponding sec-tion, you must yourself reinitialise: - the remote control key, - the one-touch electric windows, - the sunroof, - the GPS satellite navigation system.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131