Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Driving Cruise control

i120 CRUISE CONTROL System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal. The cruise control is switched onmanually: it requires a minimum vehicle speed of 25 mph (40 km/h), as well as the engaging: - of fourth gear on the manual gear-box, - of second gear with the "2 Tronic" or automatic gearbox, in sequential mode, - of position A on the "2 Tronic" gear-box or D on the automatic gearbox. The cruise control is switched off man-ually or by pressing the brake or clutch pedal or on triggering of the ESP sys-tem for safety reasons. It is possible to exceed the programmed speed temporarily by pressing the ac-celerator pedal. To return to the programmed speed, simply release the accelerator pedal. Switching off the ignition cancels any programmed speed value. The controls of this system are grouped together on lever A . 1. Cruise control mode selection dial 2. Value decrease button 3. Value increase button 4. Cruise control off/resume button The programmed information is grouped together on the instrument panel dis-play. 5. Cruise control off/resume indication 6. Cruise control mode selection indication 7. Programmed speed value Steering wheel controls Displays on the instrument panel The cruise control cannot, in any circumstances, replace the need to respect speed limits, nor can it replace the need for vigilance and responsibility on the part of the driver. You are advised to keep your feet near the pedals at all times.
!121 When the cruise control is switched on, be careful if you maintain the pressure on one of the programmed speed changing buttons: this may result in a very rapid change in the speed of your vehicle. Do not use the cruise control on slippery roads or in heavy traffi c. On a steep descent, the cruise control will not be able to prevent the vehicle from exceeding the pro-grammed speed. To avoid any risk of jamming of the pedals: - ensure that the mat is posi-tioned correctly, - never fi t one mat on top of an-other. Programming Turn dial 1 to the "CRUISE" po-sition: the cruise control mode is selected but is not switched on (OFF). Exceeding the programmed speed Intentional or unintentional exceeding of the programmed speed results in fl ashing of this speed on the display. Return to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the fl ashing of the speed. Return to normal driving Turn dial 1 to the "0" position: the cruise control mode is deselected. The display returns to the distance recorder. Operating fault In the event of a cruise control mal-function, the speed is cleared result-ing in fl ashing of the dashes. Contact a PEUGEOT dealer to have the system checked. Set the programmed speed by ac-celerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)). Switch off the cruise control by pressing button 4 : the display confi rms that it has been switched off (OFF). Switch the cruise control back on by pressing button 4again. You can then change the programmed speed using buttons 2 and 3 : - by + or - 1 mph (km/h) = short press, - by + or - 5 mph (km/h) = long press, - in steps of + or - 5 mph (km/h) = maintained press.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131