Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Driving Automatic gearbox

115 "PORSCHE TIPTRONIC SYSTEM" AUTOMATIC GEARBOX Four-speed automatic gearbox which offers a choice between the comfort of fully automatic operation, enhanced by sport and snow programmes, or manual gear changing. Therefore, four driving modes are of-fered: - automatic operation for electronic management of the gears by the gearbox, - sport programme for a more dy-namic style of driving, - snow programme to improve driving when traction is poor, - manual operation for sequential changing of the gears by the driver. Gear lever P. Park. - Immobilisation of the vehicle, hand-brake on or off. - Starting the engine. R. Reverse. - Reversing manoeuvres, vehicle sta-tionary, engine at idle. N. Neutral. - Immobilisation of the vehicle, hand-brake on. - Starting the engine. D. Automatic operation. M. +/- Manual operation with sequential changing of the four gears. Press forwards to change up through the gears. or Press rearwards to change down through the gears. Displays on the instrument panel When you move the lever in the gate to select a position, the corresponding indicator light is displayed on the instru-ment panel. P. Park R. Reverse N. Neutral D. Drive (Automatic driving) S.Sport programme .Snow programme 1, 2, 3, 4 . Gear engaged during manual operation -. Invalid value during manual operation Gear selection gate 1. Gear lever. 2. Button "S"(sport) . 3. Button ""(snow) . Foot on brake Press the brake pedal when this indicator light is displayed on the instrument panel (e.g.: starting the engine).
!!i116 Moving off Apply the handbrake. Select position P or N . Start the engine. If this procedure is not followed, an au-dible signal is heard, accompanied by a message on the multifunction display. With the engine running, press the brake pedal. Release the handbrake. Select position R , D or M , Gradually release the brake pedal. The vehicle moves off immediately. If position N is engaged inadvert-ently while driving, allow the engine to return to idle then engage posi-tion D to accelerate. The gearbox then operates in auto-adaptive mode, without any intervention on the part of the driver. It continuously selects the most suitable gear accord-ing to the style of driving, the profi le of the road and the load in the vehicle. For maximum acceleration without touching the lever, press the accelera-tor pedal down fully (kick down). The gearbox changes down automatically or maintains the gear selected until the maximum engine speed is reached. On braking, the gearbox changes down automatically to provide effi cient engine braking. If you release the accelerator sharply, the gearbox will not change to a higher gear for safety reasons. Automatic operation Select position D for automaticchanging of the four gears. appears on the instrument panel. Snow programme " " Press button "", after starting the engine. The gearbox adapts to driving on slip-pery roads. This programme improves starting and drive when traction is poor. S appears on the instrument panel. Sport programme "S" Press button "S" , after starting the engine. The gearbox automatically favours a dynamic style of driving. Never select position N while the vehicle is moving. Never select positions P or R unless the vehicle is completely stationary. When the engine is running at idle, with the brakes released, if position R , D or M is selected, the vehicle moves even without the accelera-tor being pressed. When the engine is running, never leave children in the vehicle with-out supervision. When carrying out maintenance with the engine running, apply the handbrake and select position P . Sport and snow programmes These two special programmes supple-ment the automatic operation in very specifi c conditions of use. Return to automatic operation At any time, press the button select-ed again to quit the programme en-gaged and return to auto-adaptive mode.
!i117 Stopping the vehicle Before switching off the engine, you can engage position P or N to place the gearbox in neutral. In both cases, apply the handbrake to immobilise the vehicle. Operating fault When the ignition is on, the lighting of this warning light, ac-companied by an audible signal and a message on the multi-function display, indicates a gearbox malfunction. In this case, the gearbox switches to emergency mode and is locked in 3rd gear. You may feel a substantial knock when changing from P to R and from Nto R . This will not cause any damage to the gearbox. Do not exceed 60 mph (100 km/h), local speed restrictions permitting. Contact a PEUGEOT dealer as soon as possible. If the battery is fl at and the lever is in position P , it will not be possible to change to another position. Above all, do not force the lever as this could damage the gearbox. Manual operation Select position M for sequentialchanging of the four gears. Push the lever towards the + sign to change up a gear. Pull the lever towards the - sign to change down a gear. D disappears and the gears engaged appear in succes-sion on the instrument panel. In the event of under-revving or over-revving, the gear se-lected fl ashes for a few seconds, then the actual gear engaged is displayed. It is possible to change from position D(automatic) to position M (manual) at any time. When the vehicle is stationary or mov-ing very slowly, the gearbox selects gear M1 automatically. The sport and snow programmes do not operate in manual mode. If the lever is not in position P , when the driver’s door is opened or approximately 45 seconds after the ignition is switched off, an audible signal is heard and a message ap-pears. Return the lever to position P ; the audible signal stops and the message disappears. It is only possible to change from one gear to another if the vehicle speed and engine speed permit; otherwise, the gearbox will operate temporarily in au-tomatic mode. Invalid value during manual operation This symbol is displayed if a gear is not engaged correctly (selector between two posi-tions).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131