Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Driving 2 Tronic gearbox

i112 "2 TRONIC" GEARBOX (SALOON) Five-speed controlled manual gearbox which offers a choice between the comfort of automatic operation or the pleasure of manual gear changing. Three driving modes are offered: - the automated mode for automatic control of the gears by the gearbox, - the sequential mode for manual changing of the gears by the driver, - the auto sequential mode for over-taking, for example, remaining in the automated mode while using the functions of the sequential mode. R. Reverse With your foot on the brake, move the lever upwards to select this posi-tion. N. Neutral. With your foot on the brake, select this position to start the engine. A. Automated mode. Move the lever downwards to select this mode. M. +/- Sequential mode with manual gear changing. Move the lever downwards, then to the left to select this mode, then: - push forwards to change up a gear, - or push rearwards to change down a gear. Gear lever +. Change up control. Press the back of the steering wheel control "+" to change up a gear. -. Change down control. Press the back of the steering wheel control "-" to change down a gear. Steering wheel controls The steering wheel controls do not permit the selection of neutral or the engaging and disengaging of reverse gear.
iii113 Instrument panel displays Gear lever positions N. Neutral R. Reverse 1, 2, 3, 4, 5. Gears in sequential mode AUTO. This comes on when the au-tomated mode is selected. It switches off on changing to se-quential mode. . In the automated mode, if the gear-box detects poor grip, this warning light comes on. Moving off Sequential mode After starting the vehicle, select position M to change to sequential mode. Automated mode Following use of the sequential mode, select position A to return to the automated mode. When stopping on a slope, do not use the accelerator to immobilise the vehicle; apply the handbrake. When moving off on a slope, accel-erate gradually while releasing the handbrake. Place your foot on the brake when this warning light fl ashes (e.g.: starting the engine). Select position N . Press the brake pedal. Start the engine. N appears on the instrument panel. N fl ashes on the instrument panel display if the gear lever is not in po-sition N on starting. Select fi rst gear (position M or A ) or reverse (position R ) Release the handbrake. Take your foot off the brake pedal, then accelerate. AUTO and 1 or R appear on the instrument panel. AUTO disappears and the gears engaged appear in succession on the instrument panel. The gear change requests are only car-ried out if the engine speed permits. When driving at low speed, on ap-proaching a stop sign or traffi c lights for example, the gearbox changes down to fi rst gear automatically. AUTO and the gear engaged appear on the instrument panel. The gearbox then operates in auto-adaptive mode, without any action on the part of the driver. It continuously se-lects the most suitable gear in relation to the following parameters: - driving style, - road conditions, - vehicle load. When reverse gear is engaged, an audible signal is triggered.
!i114 "Auto sequential" mode In the automated mode, you can resume control temporarily at any time using the steering wheel controls. The use of these controls permits man-ual selection of the gears in situations which require a more rapid change-down than in the automated mode (arrival at a roundabout, leaving a car park with a steep gradient, overtaking...). The gearbox engages the required gear if the engine speed permits. AUTO remains displayed on the instrument panel. After a few minutes, the gearbox resumes automatic control of the gears. "Snow" automated mode In the automated mode, if the vehicle de-tects poor grip, the gearbox will change automatically to the "snow" automated mode. Stopping the vehicle Before switching off the engine, you can change to position N to be in neutral. In this case, it is imperative that you apply the handbrake to immobilise the vehicle. Reinitialisation Following disconnection of the battery, the gearbox must be reinitialised. Switch on the ignition. Operating fault With the ignition on, if this warn-ing light comes on and AUTOfl ashes, accompanied by an au-dible signal and a message on the multifunction display, this indicates a gearbox malfunction. Have it checked by a PEUGEOT dealer. It is compulsory to press the brake pedal while starting the engine. Never select neutral N while the vehicle is moving. Only engage reverse gear R when the vehicle is immobilised, with your foot on the brake pedal. In all cases, it is imperative that you apply the handbrake to immobilise the vehicle. If you press the accelerator pedal beyond the point of resistance, the gearbox selects the gear below to permit sharper acceleration. AUTO and appear on the instrument panel. AUTO, and - appear on the instrument panel. Select position N . Press the brake pedal. Wait approximately 30 seconds until N or a gear appears on the instru-ment panel. Release the brake pedal. The gearbox is operational again.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131