Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Comfort Rear seats

!!51 No person or object must prevent the seat slide from returning to its initial position; return to this posi-tion is necessary for the seat to lock in place. Take care not to trap the seat belt to avoid hindering the passage of the rear passengers. 4. Access to rear seats (3-door) Pull the handle to fold the seat back and move the seat forwards. On re-positioning, the seat returns to its initial position. 5. Head restraint height and angle adjustment To raise the head restraint, pull it up-wards. To remove the head restraint, press the lug A and pull the head restraint upwards. To put the head restraint back in po-sition, locate the stems of the head restraint in the holes, taking care to keep them in line with the seat back. To lower the head restraint, press the lug A and the head restraint at the same time. To tilt the head restraint, tilt the lower part forwards or rearwards. The head restraint has a frame with a notch which prevents the head restraint from lowering; this is a safety device which provides pro-tection in the event of an impact. The adjustment is correct when the upper edge of the head restraint is level with the top of the head. Never drive with the head restraints removed; they must be in place and correctly adjusted.
!52REAR SEATS Bench seat the left-hand part (2/3) or right-hand part (1/3) of which can be folded to adapt the load space in the boot. Never drive with the head restraints removed; they must be in place and correctly adjusted. As the head restraints are not inter-changeable, take care to put them back in their original position when refi tting (GTi). Rear head restraints These have a high position (comfort) and a low position (rear visibility). They can also be removed; to remove them: pull the head restraint upwards to the stop, then, press the lug. 6. Armrests (except 3-door) These can be folded down and are re-movable. To remove them, press the button located between the armrest and the side of the seat and pull it.
!52REAR SEATS Bench seat the left-hand part (2/3) or right-hand part (1/3) of which can be folded to adapt the load space in the boot. Never drive with the head restraints removed; they must be in place and correctly adjusted. As the head restraints are not inter-changeable, take care to put them back in their original position when refi tting (GTi). Rear head restraints These have a high position (comfort) and a low position (rear visibility). They can also be removed; to remove them: pull the head restraint upwards to the stop, then, press the lug. 6. Armrests (except 3-door) These can be folded down and are re-movable. To remove them, press the button located between the armrest and the side of the seat and pull it.
!i53 Folding the seat (Saloon) To fold a rear seat without any risk of damage to it, always start with the seat cushion, never the seat back : move the corresponding front seat forward if necessary, raise the front of the seat cushion 1 , tilt the seat cushion 1 against the front seat, check that the seat belt is positioned correctly on the side of the seat back, Repositioning the seat(Saloon) When repositioning the rear seat: straighten the seat back 3 and secure it, fold back the seat cushion 1 . pull control 2 upwards to release the seat back 3 , place the head restraints in the low position or remove them if neces-sary, tilt the seat back 3 . When repositioning the rear seat, take care not to trap the seat belts. The seat cushion 1 can be removed to increase the loading volume. Squeeze the seat cushion fi xings to detach them from their attachments.
!52REAR SEATS Bench seat the left-hand part (2/3) or right-hand part (1/3) of which can be folded to adapt the load space in the boot. Never drive with the head restraints removed; they must be in place and correctly adjusted. As the head restraints are not inter-changeable, take care to put them back in their original position when refi tting (GTi). Rear head restraints These have a high position (comfort) and a low position (rear visibility). They can also be removed; to remove them: pull the head restraint upwards to the stop, then, press the lug. 6. Armrests (except 3-door) These can be folded down and are re-movable. To remove them, press the button located between the armrest and the side of the seat and pull it.
!i54 Folding the seat (SW) This operation can be carried out at the rear seats or through the opening rear screen. To fold a rear seat without any risk of damage: move the corresponding front seat forward if necessary, place the head restraints in the low position, Check that no object could hinder the movement of the bench seat, either above or below. Repositioning the seat (SW) The seat cushion lowers in order to be covered by the seat back; this quickly enables you to benefi t from a fl at boot fl oor. pull the control 1 forward to release the seat back 2 which folds easily onto the seat cushion 3 . When repositioning the rear seat, straighten the seat back 2 and lock it. Check that the red indicator, located at control 1 , is no longer visible.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131