Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 207 2006-2008 Checks Bonnet / Running out of fuel

i125 BONNET Protects the components of the engine and provides access for checking levels. Push the exterior control B to the left and raise the bonnet. Unclip the strut C from its housing . Fix the strut in one of the two notches to hold the bonnet open. Closing Take the strut out of the support notch. Clip the strut in its housing. Lower the bonnet and release it at the end of its travel. Pull on the bonnet to check that it is secured correctly. RUNNING OUT OF FUEL (DIESEL) If your vehicle is fi tted with an HDI en-gine, the fuel circuit must be reprimed if you run out of fuel (refer to the corre-sponding graphic). This system consists of a repriming pump and a transparent pipe. Opening Open the front left door. Pull the interior control A , located at the bottom of the door frame. The location of the interior control prevents opening of the bonnet while the front left door is closed. 1.4 litre Turbo HDI engine Open the bonnet. Fill the fuel tank with at least fi ve li-tres of diesel. Squeeze and release the repriming pump until fuel appears in the trans-parent pipe. Operate the starter until the engine starts. Close the bonnet. 1.6 litre Turbo HDI 16V engine Open the bonnet. Fill the fuel tank with at least fi ve litres of diesel. Unclip the style cover to gain access to the repriming pump. Squeeze and release the repriming pump until fuel appears in the trans-parent pipe with the green connector. Operate the starter until the engine starts. Put the style cover back in position and clip it in place. Close the bonnet.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131