Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 2009-2014 Owner's Manual Visibility Automatic illumination of headlamps

54 AUTOMATIC ILLUMINATION OF HEADLAMPS The sidelamps and dipped beam head-lamps switch on automatically if the light is poor and when the windscreen wip-ers operate continuously and switch off when the light becomes bright enough or the windscreen wipers are switched off. In foggy weather or in snow, the brightness sensor may detect suffi -cient light, the lighting will not come on automatically. If necessary, the dipped beam headlamps must be switched on manually. This function is active when the vehicle is supplied to the customer. To deactivate or activate the function: - Place the key in the accessories po-sition (1st notch), - Place the lighting stalk in the 0 posi-tion, - Press the end of the lighting stalk for more than four seconds. Do not cover the brightness sensor, coupled with the rain sensor, located in the centre of the windscreen, be-hind the rear view mirror. It is used for the automatic illumination of headlamps. Operating check Activation Activation is accompanied by an audible signal and a message on the multifunc-tion screen. Deactivation Deactivation is accompanied by an au-dible signal. When the driver uses the manual light-ing controls, the function is temporarily deactivated. If the brightness sensor does not function correctly , the lighting come on accompanied by an audible signal and a message on the multifunction screen. Consult a PEUGEOT dealer. HEADLAMP ADJUSTMENT Depending on the load in your vehicle, it is recommended that the headlamp beam is adjusted. 0. 1 or 2 people in the front seats. -. 3 people. 1. 5 people. 2. 5 people + maximum authorised load. 3. Driver + maximum authorised load. Initial setting is position 0.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131