Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 2009-2014 Owner's Manual Visibility

i52 LIGHTING CONTROL STALK System for selecting and controlling the various front and rear lamps providing the vehicle's lighting. Manual controls Lighting off Sidelamps Dipped/Main beam head-lamps Lighting The various front and rear lamps of the vehicle are designed to improve the driver's visibility depending on the exte-rior conditions: - sidelamps, to be seen, - dipped beam headlamps, to see without dazzling other drivers, - main beam headlamps, for good visibility when the road is clear, - rear foglamp, to be seen from a distance, - front foglamps, for even better for-ward vision. Programming Various automatic lighting control modes are also available according to the following options: - guide-me-home lighting, - automatic illumination of headlamps. Selection is by turning ring A . Automatic illumination of healamps Lighting on reminder With the ignition off and the automatic illu-mination of headlamps function switched off, when the driver's door is opened, a buzzer sounds if you have left the light-ing on. Front foglamps and rear foglamp Rotate the ring forwards to switch on and backwards to switch off. The status is confi rmed by the indicator lamp on the instrument panel. Vehicles fi tted with a rear foglamp (ring B) Dipped/Main beam change Pull the stalk towards you. When the lighting is switched off automatically, the rear foglamp and the dipped headlamps re-main on (turn the ring backwards to switch off the rear foglamp. The dipped beam headlamps and sidelamps then switch off). This only operates with the dipped/main beam headlamps.
!ii53 "Guide me home" lighting When you leave your vehicle, the side-lamps and dipped beam headlamps can be left on for approximately 30 seconds. To do this: - place the key in the STOP position, - place the lighting stalk in the 0 posi-tion, - fl ash the headlamps, - get out of the vehicle and lock it. Direction indicators (fl ashers) Left: downwards. Right: upwards. In good or rainy weather, both day and night, the front foglamps and the rear foglamp cause daz-zle and their use is prohibited. Do not forget to switch them off when they are no longer needed. Vehicles fi tted with front foglamps and a rear foglamp (ring C) When the lighting is switched off automatically or when the dipped beam headlamps are switched off manually, the front foglamps, the rear foglamp and the side-lamps remain on (turn the ring backwards to switch off the front foglamps. The sidelamps then switch off). Front foglamps (fi rst rotation of the ring forwards). To switch off the rear foglamp and the front foglamps, turn the ring backwards twice in succession. The front foglamps operate with the sidelamps, the dipped beam headlam-ps and the main beam headlamps. Front and rear foglamps (2nd rotation of the ring forwards).
54 AUTOMATIC ILLUMINATION OF HEADLAMPS The sidelamps and dipped beam head-lamps switch on automatically if the light is poor and when the windscreen wip-ers operate continuously and switch off when the light becomes bright enough or the windscreen wipers are switched off. In foggy weather or in snow, the brightness sensor may detect suffi -cient light, the lighting will not come on automatically. If necessary, the dipped beam headlamps must be switched on manually. This function is active when the vehicle is supplied to the customer. To deactivate or activate the function: - Place the key in the accessories po-sition (1st notch), - Place the lighting stalk in the 0 posi-tion, - Press the end of the lighting stalk for more than four seconds. Do not cover the brightness sensor, coupled with the rain sensor, located in the centre of the windscreen, be-hind the rear view mirror. It is used for the automatic illumination of headlamps. Operating check Activation Activation is accompanied by an audible signal and a message on the multifunc-tion screen. Deactivation Deactivation is accompanied by an au-dible signal. When the driver uses the manual light-ing controls, the function is temporarily deactivated. If the brightness sensor does not function correctly , the lighting come on accompanied by an audible signal and a message on the multifunction screen. Consult a PEUGEOT dealer. HEADLAMP ADJUSTMENT Depending on the load in your vehicle, it is recommended that the headlamp beam is adjusted. 0. 1 or 2 people in the front seats. -. 3 people. 1. 5 people. 2. 5 people + maximum authorised load. 3. Driver + maximum authorised load. Initial setting is position 0.
55 WIPER CONTROL STALK System for selecting and controlling the various front and rear wiping modes for clearing rain and cleaning. The front and rear wipers of the vehicle are designed to improve the driver's visibility progressively according to the weather conditions. Programming Various automatic wiper control modes are also available according to the fol-lowing options: - automatic rain sensitive windscreen wipers, - rear wiping when reverse gear is engaged. Front windscreen wiper with intermittent wipe 2 Fast wipe (heavy rain). 1 Normal wipe (moderate rain). I Intermittent wipe. 0 Off. Single wipe (press downwards). In the I ntermittent position, the wiping speed is in proportion to the vehicle speed. Front windscreen wiper with automatic wipe 2 Fast wipe (heavy rain). 1 Normal wipe (moderate rain). AUTO Automatic wipe. 0 Off. Single wipe (press downwards). In the AUTO position, the wiping speed is in proportion to the intensity of the rainfall. If the ignition has been off for more than one minute, with the wipers stalk in a position other than off, the wipers must be must be reactivated : - move the stalk to any position, - then move it back to the required position.
i56 Automatic rain sensitive windscreen wipers In the AUTO position, the windscreen wipers operate automatically and adapt their speed to the intensity of the rainfall . Operating check Activation Activation of the function is accompa-nied by a message on the multi-function screen. In the event of malfunction , the driver is informed by an audible signal. In the AUTO position, the windscreen wiper will operate in intermittent mode. Contact a PEUGEOT dealer to have the system checked. Do not cover the rain sensor located on the windscreen behind the rear view mirror. When using an automatic car wash, switch off the ignition or check that the wiper stalk is not in the AUTO position. In winter, it is advisable to wait for the windscreen to completely clear of ice before operating the automatic rain sensitive wipers. Windscreen wash Pull the wiper stalk towards you. The windscreen wash, then the windscreen wipers, operate for a specifi ed time. Rear screen wiper Turn ring A to the fi rst notch for intermit-tent wiping. If the ignition is switched off, it is necessary to reactivate the control each time . To do this, move the stalk to any position, then move it back to the required position. Automatic rear screen wiper When the windscreen wipers control is activated and you engage reverse gear, the rear screen wiper operates intermit-tently. Rear screen wash Turn ring A past the fi rst notch; the screen wash then the wiper operate for a fi xed period. If you use a bicycle carrier, con-sult a PEUGEOT dealer to have this function deactivated or install a specifi c bicycle carrier approved by PEUGEOT. COURTESY LAMPS System for selecting and controlling the various passenger compartment lamps. Front courtesy lamp (button A) - when the vehicle is unlocked, - when a door is opened, - when the ignition is switched off. It switches off when the vehicle is locked. It fl ashes while driving if a door is not closed correctly. Permanently off. Permanently on, when the key is in the accessories position or with the ignition on. In this position, the courtesy lamp comes on for approxi-mately 30 seconds:
i56 Automatic rain sensitive windscreen wipers In the AUTO position, the windscreen wipers operate automatically and adapt their speed to the intensity of the rainfall . Operating check Activation Activation of the function is accompa-nied by a message on the multi-function screen. In the event of malfunction , the driver is informed by an audible signal. In the AUTO position, the windscreen wiper will operate in intermittent mode. Contact a PEUGEOT dealer to have the system checked. Do not cover the rain sensor located on the windscreen behind the rear view mirror. When using an automatic car wash, switch off the ignition or check that the wiper stalk is not in the AUTO position. In winter, it is advisable to wait for the windscreen to completely clear of ice before operating the automatic rain sensitive wipers. Windscreen wash Pull the wiper stalk towards you. The windscreen wash, then the windscreen wipers, operate for a specifi ed time. Rear screen wiper Turn ring A to the fi rst notch for intermit-tent wiping. If the ignition is switched off, it is necessary to reactivate the control each time . To do this, move the stalk to any position, then move it back to the required position. Automatic rear screen wiper When the windscreen wipers control is activated and you engage reverse gear, the rear screen wiper operates intermit-tently. Rear screen wash Turn ring A past the fi rst notch; the screen wash then the wiper operate for a fi xed period. If you use a bicycle carrier, con-sult a PEUGEOT dealer to have this function deactivated or install a specifi c bicycle carrier approved by PEUGEOT. COURTESY LAMPS System for selecting and controlling the various passenger compartment lamps. Front courtesy lamp (button A) - when the vehicle is unlocked, - when a door is opened, - when the ignition is switched off. It switches off when the vehicle is locked. It fl ashes while driving if a door is not closed correctly. Permanently off. Permanently on, when the key is in the accessories position or with the ignition on. In this position, the courtesy lamp comes on for approxi-mately 30 seconds:
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131