Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 2009-2014 Owner's Manual Practical Information Changing a bulb

i82CHANGING A BULB Front lamps 1. Direction indicators (PY21W amber). 2. Sidelamps (W5W). 3. Dipped beam headlamps (H7-55W). 4. Main beam headlamps (H1-55W). 5. Foglamps (PSX-24W). Operating procedure for replacing a faulty bulb with a new bulb. These op-erations must be carried out with the ignition off . To gain access to the bulbs on the right-hand side: - Remove the screenwash reservoir fi ller tube. - Unclip the engine harness 1 . - Remove the nut from the engine management unit support 2 using a size 10 spanner. - Remove the engine management unit and support assembly. After changing the faulty bulb: - Slide the two lugs of the engine management unit support into the locations A . - Put the engine management unit back in place. - Tighten the engine management unit support nut (size 10 spanner). - Reclip the engine harness. These bulbs are available from PEUGEOT dealers. In certain climatic conditions (low temperature, humidity), conden-sation inside the glass of the headlamps and other lamps is normal . However, contact a PEUGEOT dealer if water is present in the headlamps.
i83 Turn the bulb holder a quarter turn and remove it. Pull the bulb and change it. To refi t, carry out these operations in reverse order. Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifi cation and colour. Direction indicators Disconnect the headlamp main con-nector, pulling the red control. Remove the plastic protective cover turning it a quarter turn. Pull the bulb out and change it. Dipped beam headlamps Disconnect the headlamp main con-nector, pulling the red control. Remove the plastic protective cover turning it a quarter turn. Press the connector downwards to release the bulb. Pull the bulb out and change it. To refi t, carry out these operations in reverse order. Sidelamps
!84 Front foglamp Slide a hand under the bumper. Turn the connector a quarter turn and remove the assembly. Remove the bulb and change it. Main beam headlamps Disconnect the headlamp main con-nector, pulling the red control. Remove the plastic protective cover turning it a quarter turn. Move aside the springs to release the bulb and pull the bulb out. To refi t, carry out these operations in reverse order. Direction indicator side repeater Push the repeater forwards and re-lease it. Remove the repeater and change it. Repeaters can be obtained from a PEUGEOT dealer. High pressure washing When using a jet washer on stub-born dirt, do not persist on the headlamps, the other lamps and their surround to avoid damaging their coating and seals.
85 Third brake lamp 5 bulbs W5W Unclip the boot side trim. Remove the wing nut. Release the lamp unit from the outside. Press the lug A and disconnect the connector. Remove the sealing foam. Move aside the tabs B and remove the bulb holder. Turn the faulty bulb a quarter turn and change it. To refi t, carry out these operations in reverse order and ensure that the bulb holder, the lamp unit and the foam cover are repositioned correctly. Using a 10 mm spanner, unscrew the 2 nuts A . Release the lamp unit. Squeeze the two tabs B to release the bulb holder. Change the faulty bulb. 1. Direction indicators(P21W amber). 2. Reversing lamps P21W. 3. Brake lamps/sidelamps (P21/5W). 4. Foglamp (P21W). Rear lamps
86 Rear foglamp (P21W) The foglamp is located on the rearbumper, on the left-hand side. Unscrew the lamp and release the assembly. Turn the pin connector a quarter turn and remove it. Change the bulb. Number plate lamps W5W Insert a thin screwdriver into one of the outer holes of the transparent cover. Push it outwards to unclip it. Remove the transparent cover. Change the faulty bulb.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131