Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 2009-2014 Owner's Manual Practical Information Battery

i!91BATTERY Operating procedure for recharging your fl at battery or for starting the en-gine from another battery. To start the vehicle from another battery: - Connect the red cable to the positive (+) terminals of the two batteries, - Connect one end of the green or black cable to the negative (-) termi-nal of the slave battery, - Connect the other end of the green or black cable to an earth point on the broken down vehicle, as far as possible from the battery (for exam-ple, right-hand engine mounting), - Operate the starter, let the engine run, - Wait for the engine to return to idle, then disconnect the cables. To charge the battery using a battery charger: - Disconnect the battery, - Follow the instructions for use given by the battery charger manufacturer, - Reconnect starting with the nega-tive (-) terminal, - Check that the terminals and connec-tors are clean. If they are covered with sulphate (white or greenish deposit), disconnect them and clean them. It is advisable to disconnect the bat-tery if the vehicle is not to be used for a period of more than one month. - Wait for 2 minutes after switch-ing off the ignition before dis-connecting the battery. - Never disconnect a terminal when the engine is running. - Never charge a battery without fi rst disconnecting the terminals. - Close the windows before dis-connecting the battery. - After every reconnection of the battery, switch on the ignition and wait 1 minute before start-ing to allow the electronic sys-tems to be initialised. If slight diffi culties are experienced after this, please consult a PEUGEOT dealer.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131