Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 2009-2014 Owner's Manual Audio Equipment Radio (Tuning, Search, RDS)

10106 Adjusting the front/rear sound distribution (Fader) When "FAD" is displayed, press button Hor I . Button H increases the volume in the front. Button I increases the volume in the rear. Adjusting the right/left sound distribution (Balance) When "BAL" is displayed, press button Hor I . Button H increases the volume on the right. Button I increases the volume on the left. Automatic volume correction This function automatically adjusts the volume in relation to the speed of the vehicle. Press button H or I to switch the func-tion on or off. RADIO Notes on radio reception Your car radio will be subject to phe-nomena which do not affect domestic radio sets. Both AM and FM reception is subject to various forms of interference. This is no refl ection on the quality of the audio equipment, but is due to the na-ture of the signals and the way in which they are transmitted. On AM, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels. On FM, interference may be the result of increasing distance from the transmitter, defl ection of the signals by obstacles (mountains, hills, buildings, etc.), or of being in an area which is not covered by a transmitter. Selecting radio mode Press button O . Selecting a waveband Press button O briefl y to select the FM1, FM2, FMast and AM wave-bands.
10106 Adjusting the front/rear sound distribution (Fader) When "FAD" is displayed, press button Hor I . Button H increases the volume in the front. Button I increases the volume in the rear. Adjusting the right/left sound distribution (Balance) When "BAL" is displayed, press button Hor I . Button H increases the volume on the right. Button I increases the volume on the left. Automatic volume correction This function automatically adjusts the volume in relation to the speed of the vehicle. Press button H or I to switch the func-tion on or off. RADIO Notes on radio reception Your car radio will be subject to phe-nomena which do not affect domestic radio sets. Both AM and FM reception is subject to various forms of interference. This is no refl ection on the quality of the audio equipment, but is due to the na-ture of the signals and the way in which they are transmitted. On AM, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels. On FM, interference may be the result of increasing distance from the transmitter, defl ection of the signals by obstacles (mountains, hills, buildings, etc.), or of being in an area which is not covered by a transmitter. Selecting radio mode Press button O . Selecting a waveband Press button O briefl y to select the FM1, FM2, FMast and AM wave-bands.
10107 Automatic station search Press button J or L briefl y to listen to the station immediately above or below. By continuing to press the button in the direction selected, you will obtain con-tinuous scrolling of the frequencies. The scrolling stops at the fi rst station found when the button is released. If the TA traffi c information programme is selected, only stations broadcasting this type of programme are selected. Searching for a station takes place fi rst in "LO" sensitivity (selection of the most powerful transmitters) during scanning of the waveband, then in "DX" sensitiv-ity (selection of the weakest and most distant transmitters). To carry out a "DX" sensitivity search directly, press button J or L twice. Manual station search Press the "MAN" button. Press button J or L briefl y to increase or decrease the frequency displayed. By continuing to press the button in the direction selected, you will obtain con-tinuous scrolling of the frequency. The scrolling stops as soon as the but-ton is released. Pressing the "MAN" button again re-turns you to the automatic station search. Manual storing of stations Select the station required. Press one of the buttons "1" to "6" for more than two seconds. The sound stops then becomes audible again, confi rming that the station has been stored. Automatic storing of FM stations (autostore) Press button O for more than two seconds. Recalling stored stations On each waveband, press one of the buttons "1" to "6" briefl y to recall the corresponding stored station. Your radio automatically stores the 6 sta-tions with the strongest signal on FM . These stations are stored on the FMast waveband. If it is not possible to fi nd six stations, the unused memories remain unchanged.
10108 RDS * Using the RDS on FM The RDS (Radio Data System) allows you to continue listening to the same station, whatever frequency it is using in the region you are travelling through. Press the "RDS" button briefl y to switch the func-tion on or off. The multifunction screen will indicate: - "RDS" if the function is selected, - "(RDS)" if the function is selected but not available. RDS station following The display indicates the name of the sta-tion selected. When the RDS is selected, the radio searches continuously for the transmitter which is broadcasting the se-lected station with the best reception. Traffi c information programme (TA) Regional following mode (REG) When they are part of a network, cer-tain stations broadcast regional pro-grammes in the various areas they serve. The regional following mode allows you to continue listening to the same programme. To do this, press the "RDS" button for more than two seconds to switch the function on or off. Any traffi c information announcement will be given priority, whatever source you are listening to (radio, CD). If you wish to interrupt a message, press the "TA" button; this switches the function off. Note: the volume of the traffi c infor-mation is independent of the volume of normal radio listening. You can adjust it using the volume button. The setting will be stored and will be used for subsequent messages. Search by type of programme (PTY) This allows you to listen to stations broad-casting a specifi c type of programme (News, Culture, Sport, Rock...). When FM is selected, press the "TA" button for more than two seconds to switch the function on or off. To search for a PTY programme: - select the PTY function, - press button J or L briefl y to scroll down the list of the different types of programme offered, - when the programme of your choice is displayed, press button J or L for more than two seconds to carry out an automatic search (following an automatic search, the PTY function is switched off). In PTY mode, the types of programme can be stored. To do this, press the pre-selection buttons "1" to "6" for more than two seconds. Press the corre-sponding button briefl y to recall the type of programme stored. EON system This system connects stations which are part of the same network. It permits the broadcasting of TA traffi c informa-tion or of a PTY programme broadcast by a station which is part of the same network as the station to which you are listening. This service is available when you have selected the TA traffi c information pro-gramme or the PTY search by type of programme. Press the "TA" button to switch the function on or off. The multifunction screen will indicate: - "TA" if the function is selected, - "(TA)" if the function is selected but not available. * According to country.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131