Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 1998-2009 Owner's Manual Special Features Alarm

SPECIAL FEATURES118-ALARMSetting and deactivating the alarm systemSwitching off the siren.The alarm completes the security equipment for your vehicle. It offers two types of protection.- external protection: when it is set, the alarm sounds if one of the doors, the boot or the bon-net is opened;- internal protection: when it is set, the alarm sounds if the sensors detect air movement in the pas-senger compartment (a broken window), or movement within the car.The alarm also has an anti-tamper function.If there is an attempt to tamper with the wires to the siren, control unit or the battery, the siren sounds and the direction indicators light.Setting the alarm (external and internal protection)Switch the ignition off and get out of the vehicle.Deadlock the vehicle.The doors lock.The direction indicators light for two seconds.The red light on the switch lashes once a second.5 seconds later, internal protection is set.45 seconds later, external protection is set.Note: when the alarm is triggered, the siren sounds for thirty seconds. After the thirty seconds it stops, but the alarm remains set.When the alarm is trig-gered, if a door, the tail-gate or bonnet is not closed correctly, the siren sounds for a moment. If the vehicle is closed correctly in the following 45 seconds, the alarm is activated and the direction indica-tors remain on for two seconds. In all cases, the alarm is activated af-ter 45 seconds.Disarming the alarm (external and internal protection)Press the unlocking button of the remote control key.The doors unlock.The direction indicators lash for two seconds.The red light on the switch goes out.Note: if the warning light continues to lash after de-activation of the alarm, it is a sign that the alarm has been triggered. The lashing will stop when the ignition is switched on.
119SPECIAL FEATURES-Emergency cut-off (if the remote control is not working)Unlock the doors with the key.Open the door.The alarm is triggered.- Turn on the ignition.- The locking system recognises the key.- The siren stops and the alarm is disarmed.Selection of the type of protectionTo set the alarm to external protection only.If you want to leave a window partial-ly open, or a pet inside the vehicle, you need to select external protec-tion only:- Switch off the ignition.- Within the next ten seconds, press the internal protection but-ton 1 until the warning light comes on continuously.- Get out of the vehicle.- Deadlock the vehicle.- The doors lock.- The direction indicators light for two seconds.- The red light on the switch lashes once a second.To de-activate external protection onlyPress the unlocking button on the remote control.The doors unlock.The direction indicators lash for two seconds.The red light on the switch goes out.To lock the vehicle without setting the alarmIt is the remote control which sets the alarm.Therefore, to lock the vehicle without setting the alarm: use the key.To recharge or replace the battery:- Turn on the ignition.- You have 10 seconds after turn-ing on the ignition to press the internal protection switch 1 and hold it down for two seconds.- The warning light lashes rapidly for three seconds.- You can now disconnect the battery.After reconnecting the battery:� Deadlock, then unlock the vehicle using the remote control.The alarm will be set after the next deadlocking operation.In no circumstances must you carry out mod-iications to the alarm.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131