Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 1998-2009 Owner's Manual Practical Information Changing a Wheel

93PRACTICAL INFORMATION-Access to the spare wheel and the jackThe wheel is located outside the vehicle, under the boot, supported by a metal carrier.- Remove the wheelbrace 1, secured on the rear right inner panel of the boot.- Using the wheelbrace 1, slacken the spare wheel carrier retaining bolt, located inside the boot under the carpet.- Lift the carrier to release the hook rearwards, then lower it.- Remove the jack storage box 2located in the spare wheel.CHANGING A WHEELRemoving a wheel- Chock the rear of the wheel diagonally opposite the wheel to be changed, using the jack storage box.- Remove the wheel trim using the wheelbrace, by pulling at the valve passage hole.- Slacken the wheel bolts.- Place the jack under the locating point on the sub-frame E that is closest to the wheel to be changed. Ensure that the entire surface of the jack base plate is in contact with the ground.- Extend the jack, completely unscrew the bolts and remove the wheel.Parking the vehicle- If possible, park the vehicle on level, stable and non-slippery ground.- Apply the handbrake, engage irst or reverse gear (position P for the automatic gearbox).
PRACTICAL INFORMATION94-For your safety, always change a wheel:- on level, stable and non slippery ground,- with the handbrake applied,- with irst or reverse gear engaged,- with the vehicle chocked using the jack storage box,- never go underneath a vehicle raised using a jack (use an axle stand).After changing the wheel- Have the tightening of the bolts and the pressure of the spare tyre checked as soon as possible by a PEUGEOT dealer.- Have the punctured tyre repaired and replace it on the vehicle as soon as possible.- The space-saver spare wheel must only be used temporarily:- inlation pressure: 4.2 bars (60 p.s.i.),- maximum speed: 50 mph (80 km/h).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131