Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 1998-2009 Owner's Manual Practical Information Changing a Bulb

PRACTICAL INFORMATION96-Dipped headlamps H7 55W/main beam headlamps H1 55 WF Remove the protective cover Afor the H7 55 W bulb or B for the H1 55 W bulb.F Disconnect the connector(s) C.F Press the end of the securing clip(s) D to remove it(them). Change the faulty bulb.CHANGING A BULBTo make access easier, on the right-hand side, irst remove the screen wash reservoir iller pipe:F align the notches by turning,F pull upwards.1.Dipped beam headlamps/ main beam headlamps2.Side lights3.Direction indicatorsF On itting, ensure that the direction notches are in the correct position and that the securing clip(s) is(are) secured correctly.F Reconnect the connector.F Replace the protective cover(s), then the screen wash reservoir iller pipe (right-hand side).
97PRACTICAL INFORMATION-Amber direction indicators PY 21 WF Turn the pin connector 3 a quarter turn (towards the front of the vehicle) and remove it.F Change the bulb.Amber direction indicator side repeater WY 5 WF Push the repeater forwards and release it.F Remove the repeater and change it.It can be obtained from a PEUGEOT dealer.Side lights W 5 WF Turn the pin connector 2 a quarter turn and remove it.F Change the bulb.Handle the bulbs with a dry cloth.The headlamps are itted with polycarbon glass with a protective coating. Do not clean them using a dry or abrasive cloth, or using deter-gents or solvents.Use a sponge and soapy water.High pressure washingWhen using this type of washing on stubborn dirt, do not persist on the headlamps, lights and their surrounds to avoid damaging their coating and seal.
PRACTICAL INFORMATION98-Unclip the boot side trim.Unclip the foam cover and reach behind the cover to locate the wing nut.Remove the wing nut.Release the light unit.Press the lug A and disconnect the connector.Remove the foam.Move aside the tabs B and remove the bulb holder.Change the faulty bulb.When reitting, ensure that the bulb holder, the light and the foam cover are repositioned correctly.Third brake light 5 bulbs W 5 WUsing a 10 mm spanner, unscrew the 2 nuts A.Release the light unit.Squeeze the two tabs B to release the bulb holder.Change the faulty bulb.Rear lights1.Direction indicators P21 W.2.Reversing lights P21 W.3.Brake lights/side lights P21/5 W.
99PRACTICAL INFORMATION-Front fog lamps H1 55 WPress under the access lap to re-lease it.Open the lap.Turn the cover to remove it.Disconnect the bulb.Press the two ends of the securing clip to release the bulb.Rear fog lamp P21 WUnclip the lamp and release the as-sembly.Turn the pin connector a quarter turn and remove it.Change the bulb.Number plate lights W 5 WInsert a thin screwdriver into one of the outer holes of the transparent cover.Push it outwards to unclip it.Remove the transparent cover.Change the faulty bulb.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131