Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 1998-2009 Owner's Manual Practical Information Battery

PRACTICAL INFORMATION104-BATTERYTo charge the battery using a battery charger:- Disconnect the battery,- Follow the instructions for use given by the battery charger manufacturer,- Reconnect starting with the negative (-) terminal,- Check that the terminals and connectors are clean. If they are covered with sulphate (white or greenish deposit), disconnect them and clean them.- Wait for 2 minutes after switching off the ignition before disconnecting the battery.- Never disconnect a terminal when the engine is running.- Never charge a battery without irst disconnecting the terminals.- Close the windows and the roof before disconnecting the battery.- After every reconnection of the battery, switch on the ignition and wait 1 minute before starting to allow the electronic systems to be initialised. If slight dificulties are experienced after this, please consult a PEUGEOT dealer.It is advisable to disconnect the battery if the vehicle is not to be used for a period of more than one month.ECONOMY MODE FUNCTIONAfter the engine has stopped, certain functions (windscreen wiper, elec-tric windows, courtesy lights, audio equipment, etc.) can only be used for a combined duration of approximately thirty minutes, to prevent discharging the battery.Once the thirty minutes are over, a switching to economy mode mes-sage appears on the multi-function display and the active functions are put on standby.These functions are reactivated au-tomatically next time the vehicle is driven.In order to resume the use of these functions immediately, the engine must be started and left to run for a few minutes.The time available to you will then be double the duration for which the en-gine is left running. However, this pe-riod will always be between ive and thirty minutes.To start the vehicle from another battery:- Connect the red cable to the positive (+) terminals of the two batteries,- Connect one end of the green or black cable to the negative (-) terminal of the slave battery,- Connect the other end of the green or black cable to an earth point on the broken down vehicle, as far as possible from the battery (for example, right-hand engine mounting),- Operate the starter, let the engine run,- Wait for the engine to return to idle, then disconnect the cables.A lat battery prevents the engine from starting.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131