Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 206 1998-2009 Owner's Manual Driving Cruise Control

79DRIVING-CRUISE CONTROLThis cruise control, of the new gener-ation, has a display on the instrument panel to indicate the memorised ref-erence speed.It enables the vehicle to maintain a steady speed programmed by the driver.In order for it to be memorised or ac-tivated, the vehicle speed must be greater than 24 mph approx. (40 km/h) with at least fourth gear engaged for vehicles itted with a manual gearbox.On vehicles itted with an automatic gearbox, the lever must be in position Dat a speed greater than 24 mph approx. (40 km/h), or in at least second gear in sequential mode.The indicator light on the in-strument panel comes on at the same time.Instrument panel displayWhen the cruise control function is ac-tivated, pressing this button enables you to display the distance recorders.After a few seconds or when this but-ton is pressed again, the display re-turns to the cruise control function.Selecting the functionF Place switch 1 in the CRUISEposition. The cruise control is not yet active and no speed has been memorised. The display indicates in succession:First activation/memorising a reference speedAs soon as you reach the chosen speed, press button 2 or 3. This memorises the speed and the display indicates (e.g. at 70 mph (110 km/h)):Note: It is possible to accelerate and drive momentarily at a speed greater than the memorised speed. The value memorised lashes. When the accel-erator pedal is released, the vehicle returns to the memorised speed.Cancelling the cruise controlIf you wish to cancel the cruise control:F Press button 4 or the brake or clutch pedal.The display indicates (e.g. at 70 mph (110 km/h)):The indicator light on the instrument panel switches off.
DRIVING80-Reactivating the cruise controlAfter cancellation of the cruise con-trol, press button 4. Your vehicle will return to the last memorised speed.The display indicates (e.g. at 70 mph (110 km/h)):It is also possible to reactivate the cruise control by pressing button 2 or 3. The memorised speed will then be the speed at which the vehicle was travelling when the cruise control was reactivated.Changing the memorised reference speedTo memorise a speed higher than the previous one, there are two options:Without using the accelerator:F press button 3;A brief press increases by 1 mph (1 km/h).An extended press increases by 5 mph(5 km/h).A maintained press increases in steps of 5 mph (5 km/h).Using the accelerator:F exceed the memorised speed until the required speed is reached,F press button 2 or 3.To memorise a speed lower than the previous one:F press button 2;A brief press decreases by 1 mph (1 km/h).An extended press decreases by 5 mph (5 km/h).A maintained press decreases in steps of 5 mph (5 km/h).Cancelling the memorised reference speedF When the vehicle becomes stationary, after switching off the ignition, the system no longer memorises a speed.Switching the function offF Place dial 1 in position 0 to switch the system off.Operating faultIn the event of a cruise control mal-function, the memorised speed is erased, the dashes lash for a few seconds:Contact a PEUGEOT dealer to have the system checked.When changing the memo-rised reference speed by means of a maintained press, pay attention as the speed can increase or decrease rapidly.Do not use the cruise control on slip-pery roads or in heavy trafic.In the event of a steep slope, the cruise control cannot prevent the vehicle from exceeding the programmed speed.In any event, the cruise control cannot replace the need to observe the speed limits, nor can it replace the need for vigilance and responsibility on the part of the driver.To prevent the mat from becoming caught under the pedals:- ensure that the mat and its ixings are positioned correctly.- never it one mat on top of another.You are advised to keep your feet near the pedals.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131