Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Safety ISOFIX mountings

83Safety5With the ignition off:►To deactivate the airbag, turn the key in the switch to the "OFF" position. ►To reactivate it, turn the key to the "ON" position.When the ignition is switched on:This warning lamp comes on and remains lit to signal deactivation.OrThis warning lamp comes on for about 1 minute to signal activation."ISOFIX" mountingsThe seats shown below are fitted with ISOFIX compliant mountings:The mountings comprise three rings for each seat, indicated by a marking:–Two ringsA, located between the vehicle seat backrest and cushion.The 2latches on ISOFIX child seats are secured to them.–One ringB, located behind the seat, called the TOP TETHER, for attaching seats fitted with an upper strap.*Depending on country of sale.This system prevents the child seat from tipping forwards in the event of a front impact.This ISOFIX mounting system provides fast, reliable and safe fitting of the child seat in the vehicle.To secure the child seat to the TOP TETHER:►Remove and stow the head restraint before installing the child seat on this seat (refit it once the child seat has been removed).►Pass the strap of the child seat behind the seat backrest, centring it between the openings for the head restraint rods.►Secure the upper strap hook to ringB.►Tighten the upper strap.When fitting an ISOFIX child seat to the left-hand rear seat of the bench seat, before fitting the seat, first move the centre rear seat belt towards the middle of the vehicle, so as to avoid the seat interfering with the operation of the seat belt.
84SafetyAn incorrectly installed child seat in a vehicle compromises the child's safety in the event of an accident.Strictly observe the fitting instructions provided in the user guide supplied with the child seat.For information about the options for fitting ISOFIX child seats in your vehicle, refer to the summary table.i-Size child seatsi-Size child seats have two latches that are anchored to the two rings A.These i-Size child seats also have:–either an upper strap that is attached to ring B.–or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position.Their role is to prevent the child seat from tipping forward in the event of a collision.For more information on the ISOFIX mountings, refer to the corresponding section.Recommended child seats"RÖMER Baby-Safe 3 i-Size"Size: 40 - 83 cm"RÖMER Baby-Safe 3 i-Size"Size: 40 - 83 cmFrom birth to 15 months(up to 13 kg)With or without its ISOFIX base.Suitable for "rearward facing" installation only."RÖMER TriFix 2 i-Size"Size: 76 - 105 cm"RÖMER TriFix 2 i-Size"Size: 76 - 105 cmFrom 15 months to 4 years(from 9 to 22 kg)Installed with ISOFIX and Top Tether mountings.Suitable for "forward facing" installation only.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131