Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Safety Deactivating the front passenger airbag

82SafetyChild seat at the front►Adjust the front passenger seat to the highest and fully back longitudinal position, with the backrest straightened."Forward facing"You must leave the front passenger airbag active."Rearward facing"The front passenger airbag must be deactivated before installing a rearward facing child seat. Otherwise, the child risks being seriously injured or killed if the airbag is deployed.Warning label - Front passenger airbagYou must comply with the following instruction, as reminded by the warning label on both sides of the passenger sun visor:NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.Deactivating the front passenger airbagPassenger airbag OFFTo ensure the safety of the child, the front passenger airbag MUST be deactivated when a "rearward facing" child seat is installed on the front passenger seat. Otherwise, the child risks being seriously injured or killed in the event of deployment of theairbag.Vehicles not equipped with a deactivation/reactivation controlInstalling a "rearwardfacing" child seat on the front passenger seat is strictly prohibited - risk of death or serious injury in the event of airbag deployment!Deactivating/Reactivating the front passenger airbagFor vehicles on which it is fitted, the switch is located on the side of the dashboard.
83Safety5With the ignition off:►To deactivate the airbag, turn the key in the switch to the "OFF" position. ►To reactivate it, turn the key to the "ON" position.When the ignition is switched on:This warning lamp comes on and remains lit to signal deactivation.OrThis warning lamp comes on for about 1 minute to signal activation."ISOFIX" mountingsThe seats shown below are fitted with ISOFIX compliant mountings:The mountings comprise three rings for each seat, indicated by a marking:–Two ringsA, located between the vehicle seat backrest and cushion.The 2latches on ISOFIX child seats are secured to them.–One ringB, located behind the seat, called the TOP TETHER, for attaching seats fitted with an upper strap.*Depending on country of sale.This system prevents the child seat from tipping forwards in the event of a front impact.This ISOFIX mounting system provides fast, reliable and safe fitting of the child seat in the vehicle.To secure the child seat to the TOP TETHER:►Remove and stow the head restraint before installing the child seat on this seat (refit it once the child seat has been removed).►Pass the strap of the child seat behind the seat backrest, centring it between the openings for the head restraint rods.►Secure the upper strap hook to ringB.►Tighten the upper strap.When fitting an ISOFIX child seat to the left-hand rear seat of the bench seat, before fitting the seat, first move the centre rear seat belt towards the middle of the vehicle, so as to avoid the seat interfering with the operation of the seat belt.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131