Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Practical information Towing device

158Practical information►If the vehicle is unlocked, lock it and then unlock it.►If the vehicle is locked, unlock it.The red indicator lamp in the flap goes out to confirm that the charging nozzle is unlocked.►In modes 2 and 3, remove the charging nozzle within 30 seconds.The charging indicator lamp comes on in white.With selective door unlocking activated, press the unlocking button twice to disconnect the charging nozzle.When charging is complete, the green charging indicator lamp in the flap goes out after about 2 minutes.Domestic charging, mode 2The end of charging is confirmed when the green CHARGE indicator lamp on the control unit and the green charging indicator lamp in the flap come on fixed.►Replace the protective cover on the charging nozzle and close the charging flap.►Disconnect the control unit end of the charging cable from the domestic socket.Accelerated charging, mode3The end of charging is indicated by the charging control unit and by the fixed lighting of the green indicator lamp in the flap.►Hang up the nozzle on the charging unit and close the charging flap.Superfast charging, mode 4The end of charging is indicated by the charger and by the fixed lighting of the green indicator lamp in the flap.►You can also pause charging by pressing this button in the flap (in mode 4 only).►Hang up the nozzle on the charger.►Depending on version, replace the protective cover on the lower section and close the charging flap.When the charging nozzle is disconnected, a message on the instrument panel indicates that charging is complete, even if the charging nozzle was disconnected before full charging was completed.Towing deviceLoad distribution►Distribute the load in the trailer so that the heaviest items are as close as possible to the axle, and the nose weight approaches the maximum permitted without exceeding it.Air density decreases with altitude, thus reducing engine performance. The maximum towable load must be reduced by 10% per 1,000metres of altitude.Use genuine towing devices and wiring harnesses approved by PEUGEOT. We recommend having them fitted by a PEUGEOT dealer or a qualified workshop.If not fitted by a PEUGEOT dealer, they must still be fitted in accordance with the vehicle manufacturer's instructions.Certain driving or manoeuvring aid functions are automatically deactivated while an approved towing system is in use.For more information about driving with a towing device fitted to a trailer and associated with the Trailer stability assist, refer to the corresponding section.Comply with the maximum authorised towable weight, as indicated on your vehicle's registration certificate, on the manufacturer's label and in the Technical data section of this guide.If using accessories attached to the towing device (e.g.bicycle carriers, tow boxes):–Comply with the maximum authorised nose weight.–Do not transport more than 4 conventional bicycles or 2 electric bicycles.When loading bicycles onto a bicycle carrier on a towball, be sure to place the heaviest bicycles as close as possible to the vehicle.Observe the legislation in force in the country where you are driving.
159Practical information7Electric motorAn electric vehicle cannot under any circumstances be fitted with a towing device.It is therefore not possible to tow a trailer or caravan.Towing device with quickly detachable towballPresentationNo tools are required to install or remove this genuine towing device.1.Carrier2.Protective plug3.Connection socket4.Safety eye5.Detachable towball6.Locking/unlocking wheel7.Security key lock8.Label to note the key referencesA.Locked position (the green marks are opposite each other); the wheel is in contact with the towball (no gap).B.Unlocked position (red mark opposite the green mark); the wheel is no longer in contact with the towball (gap of around 5mm).Affix the enclosed label in a clearly visible location, close to the carrier or in the boot.Trailers with LED lamps are not compatible with the wiring harness of this device.To ensure complete safety while driving with a Towing device, refer to the corresponding section.Before each useVerify that the towball is correctly fitted, checking the follow points:–The green mark on the wheel is in line with the green mark on the towball.–The wheel is in contact with the towball (position A).–The security key lock is closed and the key removed; the wheel can no longer be operated.–The towball must not be able to move in its carrier; test by attempting to shake it with your hand.If the towball is not locked, the trailer can become detached - risk of an accident!During useNever release the locking system with a trailer or load carrier on the towball.Never exceed the maximum authorised weight for the vehicle - the Gross Train Weight or GTW.Always comply with the maximum authorised load on the towing device: if it is exceeded, this device may become detached from the vehicle - risk of an accident!Before driving, check the headlamp height adjustment and check that the lamps on the trailer operate correctly.For more information on Headlamp height adjustment, refer to the corresponding section.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131