Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Lighting and visibility Direction indicators

60Lighting and visibilityIf the driver's door is opened, a temporary audible signal warns the driver that the lamps are on.They will go off automatically after a period of time that depends on the level of charge in the battery (entering energy economy mode).In some weather conditions (e.g. low temperature or humidity), misting on the internal surface of the glass of the headlamps and rear lamps is normal, and will disappear after the lamps have been on for a few minutes.Never look too closely at the light beam of LED technology lamps - risk of serious eye injury!Travelling abroadVehicles equipped with manual headlamp beam height adjustment:If planning to use your vehicle in a country that drives on the other side of the road, the dipped beam headlamps must be adjusted to avoid dazzling oncoming drivers. Consult a PEUGEOT dealer or a qualified workshop.Daytime running lamps/SidelampsThese LED lamps at the front and rear of the vehicle light up automatically when the engine starts.They perform the following functions:–Daytime running lamps (lighting control stalk at position "0" or "AUTO" with adequate ambient light).–Sidelamps (lighting control stalk at position "AUTO" with low ambient light or "Sidelamps only" or "Dipped/main beam headlamps").Direction indicators►Left or right: lower or raise the lighting control stalk, beyond the point of resistance.If you keep the direction indicators on for more than 20 seconds, the volume of the audible signal will increase if the speed is above 50 mph (80 km/h).Three flashes►Press briefly upwards or downwards, without going beyond the point of resistance; the direction indicators will flash 3 times.Parking lamps(Depending on version)Vehicle side marking by lighting the sidelamps on the traffic side only.►Within one minute after switching off the ignition, operate the lighting control stalk upwards or downwards, depending on the side of the traffic (e.g.when parking on the right, push the lighting control stalk down to light up on the left).This is confirmed by an audible signal and the lighting of the corresponding direction indicator lamp on the instrument panel.►To switch off the parking lamps, return the lighting control stalk to the central position.
61Lighting and visibility4Headlamp beam height adjustmentManual headlamp adjustmentTo avoid dazzling other road users, the height of the headlamp beams must be adjusted according to the load in the vehicle.0(Initial setting)Driver only or driver + front passenger15 people25 people + load in the boot3Driver only + load in the boot4 5 6Not usedThis information is provided as a guide only. Depending on version, the unused positions may be required.Automatic adjustment of the Full LEDtechnology headlampsThis system automatically adjusts the height of the headlamp beams according to different parameters (e.g.vehicle load).In the event of a malfunction, this warning lamp lights up on the instrument panel, accompanied by the display of a message and an audible signal.The system places the headlamp beams in the lowest position.Have it checked by a PEUGEOT dealer or a qualified workshop.Do not touch the LED or Full LED technology headlamps- risk of electrocution!Automatic illumination of lampsWith the lighting control stalk in the “AUTO” position and if a low level of exterior brightness is detected by the rain/sunshine sensor, the number plate lamps, sidelamps and dipped beam headlamps are switched on automatically, without any action on the part of the driver. They may also come on if rain is detected, at the same time as automatic operation of the windscreen wipers.As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically.MalfunctionIn the event of a malfunction of the rain/sunshine sensor, the vehicle’s lamps come on and this warning lamp is displayed on the instrument panel, accompanied by an audible signal and/or the display of a message.Have it checked by a PEUGEOT dealer or a qualified workshop.Do not cover the rain/sunshine sensor located at the top centre of the windscreen behind the interior rear view mirror; the associated functions would no longer be controlled.In fog or snow, the rain/sunshine sensor may detect sufficient light. For this reason, the lighting will not come on automatically.The inner surface of the windscreen may become misted up and affect the proper operation of the rain/sunshine sensor.In humid and cold weather, demist the windscreen regularly.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131