Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Lighting and visibility Automatic headlamp dipping

63Lighting and visibility4–If the windscreen is dirty, misted-up or masked (e.g.sticker) in front of the camera.–If the vehicle is facing highly reflective signs or safety barrier reflectors.The system is not able to detect:–Road users that do not have their own lighting, such as pedestrians.–Vehicles with hidden lighting (e.g.travelling behind a safety barrier on the motorway).–Vehicles at the top or bottom of a steep slope, on winding roads, on crossroads.MaintenanceClean the windscreen regularly, particularly the area in front of the camera.The internal surface of the windscreen can also become misted around the camera. In humid and cold weather, demist the windscreen regularly.Do not allow snow to accumulate on the bonnet or roof of the vehicle as this could obstruct the camera.Automatic headlamp dippingFor more information, refer to the General recommendations for automatic lighting systems.Available only on versions equipped with Full LED technology headlamps.With the ring of the lighting control stalk in the "AUTO" position and the function activated on the touch screen, this system automatically switches between dipped and main beam headlamps, according to lighting and traffic conditions, using a camera located at the top of the windscreen.This system is a driving aid.The driver remains responsible for the vehicle's lighting, its correct use in the prevailing light, visibility and traffic conditions, and for compliance with driving and vehicle regulations.The system becomes operational when the vehicle exceeds 16 mph (25km/h).When the speed falls below 9 mph (15km/h), the function is no longer operational.Activation/DeactivationWith Touch screen 10" & Bluetooth Radio & TelephoneThe settings are changed via the Drivingtouch screen menu.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectThe settings are changed via the Settings> Vehicle touch screen application.The state of the system is stored when the ignition is switched off.When the system detects thick fog, it temporarily deactivates the function.OperationIf the ambient light level is very low and traffic conditions permit:–The main beam headlamps come on automatically. These indicator lamps light up on the instrument panel.If the ambient light level is sufficient and/or the traffic conditions do not allow the main beam headlamps to be lit:
64Lighting and visibility–The dipped beam headlamps remain lit. These indicator lamps light up on the instrument panel.The function is deactivated if the foglamps are switched on.When the foglamps are switched off, the function is automatically reactivated.This indicator lamp goes out when the function is deactivated.PauseIf the situation requires a change of headlamp beam, the driver can take over at any time.►Switch the headlamps manually between dipped and main beam to pause the function.If the "AUTO" and "Dipped beam" indicator lamps were on, the system changes to main beam.If the "AUTO" and "Main beam" indicatorlamps were on, the system changes to dipped beam.►To reactivate the function, once again switch the headlamps manually between dipped and main beam.MalfunctionIf a malfunction occurs with the system or the camera, this warning lamp lights up on the instrument panel, accompanied by an audible signal and a message.Have it checked by a PEUGEOT dealer or a qualified workshop.Wiper control stalkBefore operating the wipers in wintry conditions, clear any snow, ice or frost from the windscreen and around the wiper arms and blades.Do not operate the wipers on a dry windscreen. In extremely hot or cold weather, check that the wiper blades are not stuck to the windscreen before operating the wipers.After using an automatic car wash, you may temporarily notice abnormal noises and poorer wiping performance. You do not need to replace the wiper blades.Without AUTO wipingWith AUTO wipingWindscreen wipers►To select the wiping speed: raise or lower the stalk to the desired position.Fast wiping (heavy rain) Normal wiping (moderate rain) Intermittent wiping (proportional to the vehicle’s speed)Switching offSingle wipe (press down and release). orAutomatic wiping Refer to the corresponding section.If the ignition has been switched off with the windscreen wipers active, you must operate the control stalk again to reactivate wiping when the ignition is switched on again (unless the ignition was off for less than aminute).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131