Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Ease of use and comfort Courtesy lamps

56Ease of use and comfort►Check that the mat is secured correctly.To avoid any risk of jamming the pedals:–Only use mats which are suited to the fixings already present in the vehicle; these fixings must be used.–Never fit one mat on top of another.The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control/speed limiter.The approved mats have two fasteners located underneath the seat.Courtesy lampsNon touch-sensitive version1.Front courtesy lamp2.Front reading lampsFront courtesy lampIn this position, the courtesy lamp comes on gradually:–when the vehicle is unlocked.–when the key is removed from the ignition switch.–when a door is opened.–when the remote control locking button is activated, in order to locate the vehicle.It switches off gradually:–when the vehicle is locked.–when the ignition is switched on.–30 seconds after the last door is closed.Permanently off.Permanent lighting. In "Permanent lighting" mode, the lighting time varies according to the circumstances:–With the ignition off, approximately 10 minutes.–In energy saving mode, approximately 30 seconds.–With the engine running, unlimited.Reading lamps►With the ignition on, operate the corresponding switch.Do not place anything against the courtesy lamps.Touch version with LED1.Front touch-sensitive courtesy lamp2.Front touch-sensitive reading lampsTouch-sensitive courtesy lampIt comes on:–when the vehicle is unlocked.–when the ignition is switched off.–when a door is opened.–when the remote control locking button is activated, in order to locate the vehicle.It switches off:–when the vehicle is locked.–when the ignition is switched on.–30 seconds after the last door is closed.The front and rear touch-sensitive reading lamps come on and go off at the same time as the courtesy lamp.A long press on the front touch-sensitive courtesy lamp completely deactivates it (confirmed by the "OFF" symbol).The front and rear touch-sensitive reading lamps still remain operational.
57Ease of use and comfort3Touch-sensitive reading lamps3.Rear touch-sensitive reading lamps►With the ignition on, press the corresponding reading lamp.Interior ambient lightingSoft passenger compartment lighting improves visibility inside the vehicle in low-light conditions.With Touch screen 10" & Bluetooth Radio & TelephoneActivation/deactivation and adjustment of the brightness are set via the Drivingtouch screen menu.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectBy default, the colour of the interior ambient lighting is linked to that of the screens, depending on the driving mode selected.Activation/deactivation and adjustment of the brightness are set via the Settings > Brightness touch screen application.The colour is selected via the Settings > Customization touch screen application.Boot fittings1.Load space cover2.Boot lamp3.Stowing rings4.Open storage wells5.Tool kit (depending on equipment)6.Boot carpet or 2-position boot floor7.Storage wellThe stowing rings are designed to secure luggage using different types of retaining nets.These retaining nets are available as an accessory.For more information, contact a PEUGEOT dealer or a qualified workshop.2-position boot floorThis two-position floor allows the boot volume to be optimised using the lateral stops located on the sides:–High position (100kg max.): to obtain a flat floor up to the front seats, when the rear seats are folded down.–Low position (150kg max.): maximum boot volume.On certain versions, the adjustable boot floor cannot be fitted in the low position.To change the height:►Lift and pull the floor towards you using its central handle, then use the lateral stops to move it.►Push the floor all the way forwards to place it in the desired position.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131